- 19 12月, 2010 6 次提交
-
-
由 Blue Swirl 提交于
Avoid the warning below by using snprintf: ../libhw64/vl.o(.text+0x78d4): In function `get_boot_devices_list': /src/qemu/vl.c:763: warning: sprintf() is often misused, please use snprintf() Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Use existing dump_mmu() to implement monitor command 'info tlb'. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Avoid these warnings with GCC 4.6.0: /src/qemu/hw/ide/ahci.c: In function 'ahci_reset_port': /src/qemu/hw/ide/ahci.c:810:14: error: variable 'tfd' set but not used [-Werror=unused-but-set-variable] /src/qemu/hw/ide/ahci.c: In function 'handle_cmd': /src/qemu/hw/ide/ahci.c:1103:19: error: variable 'pr' set but not used [-Werror=unused-but-set-variable] In the tfd variable case, fix the logic also. CC: Alexander Graf <agraf@suse.de> CC: Kevin Wolf <kwolf@redhat.com> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
This patch replaces explicit bswaps with endianness hints to the mmio layer. CC: Alexander Graf <agraf@suse.de> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
QEMU source code with CRLF line endings which is quite common on windows hosts fails with current make_device_config.sh. The awk script gets the name of the included file with \r, so instead of pci.mak it will search for pci.mak\r which of course does not work. Fix this by removing any \r. v2: Avoid using sub() and \r with awk because they are unsupported on some platforms. Use tr to remove \r. This new solution improves portability and was suggested by Paolo Bonzini. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Acked-by: NAndreas Färber <andreas.faerber@web.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Bob Breuer 提交于
ledma has 0x20 bytes of registers according to OBP, and at least Solaris9 reads the 5th register which is beyond what we've mapped. So let's setup a flag (inspired by a previous patch from Blue Swirl) to identify ledma from espdma, and map another 16 bytes of registers which return 0. Signed-off-by: NBob Breuer <breuerr@mc.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 18 12月, 2010 4 次提交
-
-
由 Blue Swirl 提交于
Avoid this warning like other uses of setsockopt: /src/qemu/net/socket.c: In function 'net_socket_mcast_create': /src/qemu/net/socket.c:210: warning: passing argument 4 of 'setsockopt' from incompatible pointer type Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Acked-by: NAndreas Färber <andreas.faerber@web.de>
-
由 Stefan Hajnoczi 提交于
For some reason the carets ('^') in the QED specification disappeared. This patch puts them back. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 17 12月, 2010 30 次提交
-
-
由 Jes Sorensen 提交于
In addition this adds missing braces to the function to be consistent with the coding style. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jes Sorensen 提交于
It doesn't really make sense for functions in qcow2.c to be named qcow_ so convert the names to match correctly. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
This patch adds support for the qemu-img check command. It also introduces a dirty bit in the qed header to mark modified images as needing a check. This bit is cleared when the image file is closed cleanly. If an image file is opened and it has the dirty bit set, a consistency check will run and try to fix corrupted table offsets. These corruptions may occur if there is power loss while an allocating write is performed. Once the image is fixed it opens as normal again. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
This patch implements the read/write state machine. Operations are fully asynchronous and multiple operations may be active at any time. Allocating writes lock tables to ensure metadata updates do not interfere with each other. If two allocating writes need to update the same L2 table they will run sequentially. If two allocating writes need to update different L2 tables they will run in parallel. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
This patch adds code to look up data cluster offsets in the image via the L1/L2 tables. The L2 tables are writethrough cached in memory for performance (each read/write requires a lookup so it is essential to cache the tables). With cluster lookup code in place it is possible to implement bdrv_is_allocated() to query the number of contiguous allocated/unallocated clusters. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
This patch introduces the qed on-disk layout and implements image creation. Later patches add read/write and other functionality. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Christoph Hellwig 提交于
Add support to discard blocks in a raw image residing on an XFS filesystem by calling the XFS_IOC_UNRESVSP64 ioctl to punch holes. Support for other hole punching mechanisms can be added when they become available. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
discard [-Cq] off len -- discards a number of bytes at a specified offset discards a range of bytes from the given offset Example: 'discard 512 1k' - discards 1 kilobyte from 512 bytes into the file Discards a segment of the currently open file. -C, -- report statistics in a machine parsable format -q, -- quite mode, do not show I/O statistics Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Christoph Hellwig 提交于
Support discards via the WRITE SAME command with the unmap bit set, and tell the initiator about the support for it via the block limit and the new thin provisioning EVPD pages. Also fix the comment which incorrectly describedthe block limits EVPD page. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Christoph Hellwig 提交于
Add a new bdrv_discard method to free blocks in a mapping image, and a new drive property to set the granularity for these discard. If no discard granularity support is set discard support is disabled. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
We register the vm change state handler in a PCI BAR map() function. This function can be called multiple times throughout the lifetime of a PCI IDE device. This results in duplicate vm change state handlers being register, none of which are ever unregistered. Instead, register the vm change state handler in the device's init function once and for all. piix tested, cmd646 and via not tested. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
It's an indirect call to qemu_malloc, which never returns an error. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jes Sorensen 提交于
Kevin suggested to have bdrv_img_create() return proper -errno values on error. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jes Sorensen 提交于
The monitor command is: snapshot_blkdev <device> [snapshot-file] [format] Default format is qcow2. For now snapshots without a snapshot-file, eg internal snapshots, are not supported. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jes Sorensen 提交于
This patch re-factors img_create() moving the code doing the actual work into block.c where it can be shared with QEMU. This is needed to be able to create images from QEMU to be used for live snapshots. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Call error_set_progname during the qemu-img initialization, so that error messages printed with error_report() use the right prefix. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alexander Graf 提交于
ATAPI also can do ncq, so let's expose the capability. This patch makes CD-ROM support work on Windows 7 for me. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Sebastian Herbszt 提交于
Set SATA Mode Select to AHCI in the Address Map Register. Signed-off-by: NSebastian Herbszt <herbszt@gmx.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alexander Graf 提交于
This patch enables AHCI for all machines supporting PCI. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alexander Graf 提交于
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alexander Graf 提交于
This patch adds an emulation layer for an ICH-9 AHCI controller. For now this controller does not do IDE legacy emulation. It is a pure AHCI controller. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alexander Graf 提交于
We need a PCI ID for our new AHCI adapter. I just picked an ICH-9 because that's the one in the Q35 chipset. This patch adds a PCI ID define for an ICH-9 AHCI adapter. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alexander Graf 提交于
This patch adds the storage sata class id. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Roland Elek 提交于
I modified ide_identify() to include the zero-based queue length value in word 75, and set bit 8 in word 76 to signal NCQ support in the identify data for AHCI SATA drives. Signed-off-by: NRoland Elek <elek.roland@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alexander Graf 提交于
We hook into transfer_start and immediately call the end function for ahci. This means that everything needs to be in place for the end function when we start the transfer, so let's move the function down to where all state is in place. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alexander Graf 提交于
The ATA core is currently heavily intertwined with BMDMA code. Let's loosen that a bit, so we can happily replace the DMA backend with different implementations. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-