In case no listening address was specified, "info spice" reports
"0.0.0.0" as address.  Which is incorrect in case spice is listening
on ipv6.  Replace it by a wildcard "*" to indicate it is not limited
to a specific address.

Note:  Being more specific is not possible without extending the
spice-server api.  The socket is handled by spice-server not
qemu, so qemu can't easily figure the actual socket address.
Reported-by: NDavid Jaša <djasa@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

trivial patches for 2014-05-07

# gpg: Signature made Wed 07 May 2014 18:01:15 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-05-07: (21 commits)
  libcacard: remove unnecessary EOL from debug prints
  docs/memory.txt: Fix document on MMIO operations
  readline: Sort completions before printing them.
  readline: use g_strndup instead of open-coding it
  qmp: report path ambiguity error
  libcacard: replace pstrcpy() with memcpy()
  glib: move g_poll() replacement into glib-compat.h
  do not call g_thread_init() for glib >= 2.31
  hw/9pfs: Add include file for exported symbol
  xen: remove unused global, xen_xcg
  hw: Add missing 'static' attributes
  qemu-timer: Add missing 'static' attribute
  ui: Add missing 'static' attribute
  monitor: Add missing 'static' attribute
  hw/s390x: Add missing 'static' attribute
  hw/mips: Add missing 'static' and 'const' attributes
  hw/9pfs: Add missing 'static' attributes
  arch_init: Be sure of only one exit entry with DPRINTF() for ram_load()
  tests/tcg: Fix compilation of test_path
  qga: Fix typo (plural) in comment
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/sstabellini/xen-140507-2:
  xen_disk: add discard support
  pass an inclusive address range to xc_domain_pin_memory_cacheattr
  xen: factor out common functions
  xen: move Xen HVM files under hw/i386/xen
  xen: move Xen PV machine files to hw/xenpv
  qemu-xen: free all the pirqs for msi/msix when driver unload
  exec: Limit translation limiting in address_space_translate to xen
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

.impl.valid should be .impl.unaligned and the description needs some
fixes.

.old_portio is removed since commit b40acf99 (ioport: Switch
dispatching to memory core layer).
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NHani Benhabiles <hani@linux.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

Without this, ambiguous path is reported to the user as
"not found", which is confusing at least.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Commit 2e679780 replaced strncpy() with pstrcpy()
in one place in libcacard.  This is a qemu-specific function,
while libcacard is a stand-alone library (or tries to be).
But since we know the exact length of the string to copy,
and know that it definitely will fit in the destination
buffer, use memcpy() instead, and null-terminate the string
after that.

An alternative is to use g_strlcpy() or strncpy(), but memcpy()
is more than adequate in this place.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org
Cc: Alon Levy <alevy@redhat.com>

We have a dedicated header file for wrappers to smooth over glib version
differences.  Move the g_poll() definition into glib-compat.h for
consistency.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org

glib >= 2.31 always enables thread support and g_thread_supported()
is #defined to 1, there's no need to call g_thread_init() anymore,
and it definitely does not need to report error which never happens.
Keep code for old < 2.31 glibc anyway for now, just #ifdef it
differently.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-trivial@nongnu.org

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NJim Meyering <meyering@redhat.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This fixes warnings from the static code analysis (smatch).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This fixes a warning from the static code analysis (smatch).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

There was already a forward declaration using 'static',
but the attribute was missing in the implementation.

This fixes a warning from the static code analysis (smatch).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This fixes a warning from the static code analysis (smatch).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This fixes a warning from the static code analysis (smatch).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

When DPRINTF() has effect, the original author wants to print all
ram_load() calling results. So need use 'goto' instead of 'return'
within ram_load(), just like other areas have done.
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The test_path binary is (unlike the other test binaries in tests/tcg)
actually intended to be compiled with the same compiler used to build
the main QEMU executables. It actually #includes a number of the
QEMU source files in an attempt to unit-test the util/path.c functions,
and so if it is not compiled with the same compiler used by configure
to set CONFIG_ settings then it is liable to fail to build.
Fix the makefile to build it with the default C compiler rules, not
CC_I386, and fix the test itself not to include a lot of unnecessary
trace related source files which cause the build to fail if the trace
backend is anything other than 'simple'.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Commit e26110cf added a check for shacmd to create a hash
for modules.  This check in configure is using bash construct &>
to redirect both stdout and stderr, which does fun things on some
shells.  Get rid of it, use standard redirection instead.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NFam Zheng <famz@redhat.com>

Implement discard support for xen_disk. It makes use of the existing
discard code in qemu.

The discard support is enabled unconditionally. The tool stack may
provide a property "discard-enable" in the backend node to optionally
disable discard support.  This is helpful in case the backing file was
intentionally created non-sparse to avoid fragmentation.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

xc_domain_pin_memory_cacheattr expects an inclusive address range:
adjust the parameters.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

So common functions used by both HVM and PV are factored out from
xen-all.c to xen-common.c.

Finally rename xen-all.c to xen-hvm.c, as those functions are only
useful to HVM guest.

Create *-stub files and modify Makefile.target to reflect the changes.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

pc,net,MAINTAINERS,build updates

MAINTAINERS updated with link to the security process documentation
apic version modified to make more guests happy
On top of that, bugfixes all over the place
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 07 May 2014 17:15:29 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  configure: make source tree build more robust
  MAINTAINERS: addresses for responsible disclosure
  pm_smbus: correctly report unclaimed cycles
  smbus: return -1 if nothing found at the given address
  smbus: allow returning an error from reads
  apic: use emulated lapic version 0x14 on pc machines >= 2.1
  pc: add compat_props placeholder for 2.0 machine type
  i8259: don't abort when trying to use level sensitive irqs
  acpi: fix tables for no-hpet configuration
  acpi-build: properly decrement objects' reference counters
  acpi/pcihp.c: Rewrite acpi_pcihp_get_bsel using object_property_get_int
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When source directory can be arrived at by two paths,
configure might misdetect an out of tree build.
The simplest way to trigger the problem is running
configure using a full path. E.g. (<firstpath> refers to qemu source
tree):
    ln -s <firstpath> <secondpath>
    cd <firstpath>
    <secondpath>/configure

A more practical way is when make runs configure automatically:

1. cd <firstpath>/; ./configure
    SRC_PATH=<firstpath>/ is written into config_host.mak
2. cd <secondpath>/; touch configure; make
    make now runs <firstpath>/configure, so configure
    assumes it's an out of tree build

When this happens configure overwrites parts of
the current tree with symlinks.

Make the test more robust: look for configure
in the current directory.
If there - we know it's a source build!
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Adding addresses to MAINTAINERS, as agreed on the last conference call:

http://wiki.qemu.org/SecurityProcess

People sometimes detect security issues in upstream
QEMU and don't know where to report them in a non-public way.
Of course whoever just wants full disclosure can just go public,
but there's nothing specified for non-public - until recently Anthony
was doing this informally.

As I started doing this recently anyway, I can handle this on the QEMU side
in a more formal way.

Adding a secalert mailing list as well - they are the ones who is actually
opening CVEs, communicating issues to all downstreams etc,
and they are already handling this for upstream, not just Red Hat.

Keeping Anthony's address around in case he wants to be informed.

Peter Maydell said that he prefers not to be on this contact list at
this point.

A public mailing list has been created - not listing it here yet -
until we know how to set it up in a secure fashion and
until there are more people so manually copying everyone
becomes unwieldy for reporters.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Without this patch, i2cdetect will report all addresses as present.
With it, only 0x50..0x57 are present.

Before:

         0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
    00:          03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
    10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
    20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
    30: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
    40: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
    50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
    60: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
    70: 70 71 72 73 74 75 76 77

After:

         0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
    00:          -- -- -- -- -- -- -- -- -- -- -- -- --
    10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- --
    60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    70: -- -- -- -- -- -- -- --
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Pirqs are not freed when driver unload, then new pirqs are allocated when
driver reload. This could exhaust pirqs if do it in a loop.

This patch fixes the bug by freeing pirqs when ENABLE bit is cleared in
msi/msix control reg.

There is also other way of fixing it such as reuse pirqs between driver reload,
but this way is better.
Xen-devel: http://marc.info/?l=xen-devel&m=136800120304275&w=2Signed-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The address_space_translate() function cuts the returned plen (page size)
to hardcoded TARGET_PAGE_SIZE. This function can be used on pages bigger
than that so this limiting should not be used on such pages.

Since originally the limiting was introduced for XEN, we can safely
limit this piece of code to XEN. So does the patch.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Add "version" property to local apic, and have it default to
0x14 for pc machines starting at 2.1. For compatibility with
previous releases, pc machines up to 2.0 will have their local
apic version set to 0x11.
Signed-off-by: NGabriel L. Somlo <somlo@cmu.edu>
Acked-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add the "boilerplate" necessary for subsequent patches to
simply drop in compat_props for pc machines 2.0 and older.

This patch contains no functional changes.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Acked-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This is a guest-triggerable error, as seen when using Xenix 2.3.4.
Replace hw_error by LOG_UNIMPL, so that guests can continue.
With this patch, I can install and use Xenix 2.3.4a without any problem.
I can also start installation of Xenix 2.3.4q, but it fails due to not
finding an hard disk.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>