Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Together with the first patch this enables using the prefixed
pkg-config, thus picking up the correct flags for SDL.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

After the next commit, pkg-config could be used for the shared library
configuration case and sdl-config for static libraries.  So I prepare
the test here by doing two changes:

at the same time I remove useless backslashes from the invocation of
grep;

1) fixing a typo ($sd_cflags).  The typo has been there since commit
1ac88f28 (remove sdl_static. Just do the right thing if static is yes,
2009-07-27).

2) fixing an erroneous "test `... | grep > /dev/null`" idiom that would
never succeed since grep's output would be empty;

3) checking the status code after executing sdl-config --static --libs;
this is needed for the next patch only.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since pkgconfig can give different output for different targets,
it should be tried with the cross-compilation prefix first.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Although the value stored to 'addr' is used in the enclosing expression,
the value is never actually read from 'addr'.

Probably a typo.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The variable is_annulled is referenced in a FIXME comment, so instead
of removing the variable, comment out the lines so that the FIXME
can be understood.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

pci_get_byte, pci_get_word, pci_get_long and pci_get_quad
all take a const uint8_t pointer, because they only read
the configuration data.

Their prototypes should reflect this fact.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use new way to associate ROM files to devices.

Currently, there is only a ROM file for i82559er
included in QEMU, so the patch does not add
.romfile for the other devices.

When flexible mode is fixed in eepro100, adding
more ROM files will be possible. It should be
possible to create them from pxe-i82559er.bin,
because etherboot uses the same driver for all
eepro100 devices (only PCI ids differ).

Maybe it is even possible to create a single
pxe-i8255x.bin which supports all eepro100 devices
(not supported with current etherboot).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The numerical value was wrong (0x2800 instead of 0x0280)
which indeed did not make sense.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Turns out on those versions of FreeBSD (>= 7.x) that know OSS_GETVERSION
the ioctl doesn't actually work yet (except in the Linuxolator), so if
building on FreeBSD assume the sound drivers are new enough if the ioctl
returns the errno it does currently on FreeBSD.

(Rev 2 after private discussion with malc.)
Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Nmalc <av1474@comtv.ru>

Mac feature bit isn't going to work as all network cards already have a
'mac' property to set the mac address.  Remove it from mask and add in
get_features.
Reported-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Will be required for upcoming KVM cpuid leaf. Host kernels >= 2.6.32 as
well as future kvm-kmod releases (more recent than kvm-kmod-2.6.32.3)
do/will provide them.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since kvm-kmod-2.6.32.2 we have an alternative source for recent KVM
kernel headers. Use it when available and not overruled by --kerneldir.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Value stored to 'nb_per_line' is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix by Igor Kovalenko.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The 32-bit right-shift instructions is defined to extend the shifted
output to 64-bits.  A shift count of zero therefore is a simple
extension without actually shifting.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The {div,divu}2 opcodes are intended for systems for which the
division instruction produces both quotient and remainder.  Sparc
is not such a system.  Indeed, the remainder must be computed as

  quot = a / b
  rem = a - (quot * b)

Split out a tcg_out_div32 function that properly initializes Y
with the extension of the input to 64-bits.  Discard the code
that used the 64-bit DIVX on sparc9/sparcv8plus without extending
the inputs to 64-bits.  Implement remainders in terms of division
followed by multiplication.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
[blauwirbel@gmail.com: applied rth's typo fix in tcg_out_div32]
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Only 'L' constraint needs that.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add missing 32-bit double-word support opcodes.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add a function to handle the register-vs-immediate test for arithmetic.

Also, adjust the OP_32_64 macro so that it auto-indents properly.
Rename the gen_arith32 label to gen_arith, since it handles 64-bit
arithmetic as well.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Hi all,
calling vnc_update_client in vnc_refresh might have the unlikely side
effect of setting vd->timer = NULL, if the last vnc client disconnected.
In this case we have to return from vnc_refresh without updating the
timer, otherwise we cause a segfault.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Without this fix, guest crashes with drive=virtio.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The monitor_protocol_event() function will free the
event's data, this is wrong as 'data' management is up
to the caller.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

Leave the bogus access method used by OpenBIOS in place for now.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

  5da6833 Update version to 0.5.1
  669c991 Fix sign error preventing incorrect memory over 4gig calculation.
  7e6bd3e Minor - better indent assembler in int1587.
  48cf232 Add comment explaining why mptable is in low memory.
  643062f Add int1589 support.
  085debd Set FDPT in irq table even for small drives.
  7c1b186 Reduce #ifs by weeding out some cross-chunk function definitions.
  f9b25d3 Fix vgahook sign issue; add warning to build to catch future cases.
  3862b2d vgabios: Fix compile error due to fixed prototypes.
  1ca05b0 Be sure to add "void" to all function prototypes that take no args.
  b5bb9db mptable: Reset pinmask on new bus or device.
  8918989 Detect latest FC12 gcc -combine breakage.
  c9d3c2d Minor vga binary cleanups.
  9a8609f Make MTRR region 0xc0000-0x100000 be cached.
  fdca418 Force a link error if a function is used from the wrong code chunk.
  dad41d9 Add __noreturn define for __attribute__((noreturn)).
  c003148 Implement native 32bit APM support.
  5c99b6c Commit compiled dsdt file; misc comment updates.
  29f4b91 prevent acpi from rerouting SCI interrupt
  4c94b7e enumerate all PCI buses in mptable
  871e0a0 Add support for 32bit PCI BIOS entry.
  eda2c83 Only add "addr32" to memory accesses that require them.
  52a300f Introduce MODESEGMENT define; rename VISIBLE32 to VISIBLE32FLAT.
  fe2c3ee Allocate smbios in temp space and copy into final location.
  b164d2c Clear user reserved interrupts (0x60-0x66).
  d9104ff Remove pci_bios_bigmem_addr; set pci_bios_mem_addr=0xe0000000
  14021f2 Add initial support for ATA DMA.
  8362699 Allocate mptable in temp space and copy into final location.
  979862e Also report memory over 4G during init.
  928d4df provide correct pci routing information in mptable
  afc02da Add symbolic definitions for MTRR code.
  fb214dc Fix yield() so it works from boot code.
  2ceeec9 Fix potential build failure due to text16 section being too large.
  a2195e4 Increase version in preparation for next release.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBruce Rogers <brogers@novell.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

So '-M pc-0.10' and '-M pc-0.11' will use the fw_cfg rom load method
by default.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds a pci bus property 'rombar' which specifies whenever
the pci rom should be loaded via pci rom bar (default) or via fw_cfg.
The later can be used for compatibility with older qemu versions where
no pci rom bar is present.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch changes the way rom loading via fw_cfg is handled.
Instead of having pc_init1() call a function which passed all
roms to the firmware config we simply pass a pointer to fw_cfg
to the rom loader.

Advantage: loading roms via firmware works also for devices which
are initialized after pc_init1(), i.e. everyting added via -device.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Changes:
 - make dir argument mandatory, we allways have one anyway
   (vgaroms or genroms).
 - check for duplicates, skip loading if found.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Changes:
  - Drop extra file argument from rom_add_file().
  - Drop fw_dir check in do_info_roms, we allways have a dir name.
  - code style fixes.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a new machine type for qemu 0.12.

Also fixup the 0.11 machine type: msi for virtio-blk-pci was enabled
after the 0.11 release, so turn it off in the 0.11 machine type.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If a PXE client only wants to find out the size of a file, it will
open the file and then abort the transfer by sending a TFTP ERROR packet.

The ERROR packet should cause qemu to terminate the session. If not,
the sessions will soon run out and cause timeouts in the client.

Also, if a TFTP session already exists with same IP/UDP port, it
should be terminated when a new RRQ is received, instead of creating a
duplicate (which will never be used).

A patch for gPXE to send the ERROR packet is also being submitted to
gPXE. Together they resolve slowness/hanging when booting pxegrub from
qemu's internal TFTP server. The patch from Milan Plzik to return
after sending OACK is also required for a complete fix.
Signed-off-by: NThomas Horsten <thomas@horsten.com>
Signed-off-by: NMilan Plzik <milan.plzik@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently the dmg image format driver simply opens the images as raw
if any kind of failure happens.  This is contrarty to the behaviour
of all other image formats which just return an error and let the
block core deal with it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since patch ed757e14t, virtio will
sometimes clear all status registers on bus master disable, which loses
information such as VIRTIO_CONFIG_S_FAILED bit.  This is a result of
a patch being misapplied: code uses !  instead of ~ for bit
operations as in Yan's original patch.  This obviously does not make
sense.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>