MIPS Release 6 provides multi-threading features which replace
pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new
CP0.Config5.VP (Virtual Processor) bit which indicates presence of
multi-threading support which includes CP0.GlobalNumber register and
DVP/EVP instructions.
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Set Config5.XNP for R6 cores to indicate the extended LL/SC family
of instructions NOT present.
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

As full specification of P5600 is available, mips32r5-generic should
be renamed to P5600 and corrected as its intention.
Correct PRid and detail of configuration.
Features which are not currently supported are described as FIXME.

Fix Config.MM bit location
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
[leon.alrae@imgtec.com: correct cache line sizes and LLAddr shift]
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Fix core configuration for MIPS64R6-generic to make it as close as
I6400.
I6400 core has 48-bit of Virtual Address available (SEGBITS).
MIPS SIMD Architecture is available.
Rearrange order of bits to match the specification.
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Define a new CPU definition supporting MIPS32 Release 6 ISA and
microMIPS32 Release 6 ISA.
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Enable XPA in MIPS32R5-generic and LPA in MIPS64R6-generic.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>

PABITS are not hardcoded to 36 bits and we do not model 59 PABITS (which is
the architectural limit) in QEMU.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>

ERETNC is identical to ERET except that an ERETNC will not clear the LLbit
that is set by execution of an LL instruction, and thus when placed between
an LL and SC sequence, will never cause the SC to fail.

Presence of ERETNC is denoted by the Config5.LLB.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>

Release 6 requires misaligned memory access support for all ordinary memory
access instructions (for example, LW/SW, LWC1/SWC1).
However misaligned support is not provided for certain special memory accesses
such as atomics (for example, LL/SC).
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

This relatively small architectural feature adds the following:

FIR.FREP: Read-only. If FREP=1, then Config5.FRE and Config5.UFE are
          available.

Config5.FRE: When enabled all single-precision FP arithmetic instructions,
             LWC1/LWXC1/MTC1, SWC1/SWXC1/MFC1 cause a Reserved Instructions
             exception.

Config5.UFE: Allows user to write/read Config5.FRE using CTC1/CFC1
             instructions.

Enable the feature in MIPS64R6-generic CPU.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Save MSACSR state. Also remove fp_status, msa_fp_status, hflags and restore
them in post_load() from the architectural registers.
Float exception flags are not present in vmstate. Information they carry
is used only by softfloat caller who translates them into MIPS FCSR.Cause,
FCSR.Flags and then they are cleared. Therefore there is no need for saving
them in vmstate.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Enable vectored interrupt support for the 74Kf CPU, reflecting hardware.
Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Add the M14K and M14Kc processors from MIPS Technologies that are the
original implementation of the microMIPS ISA.  They are dual instruction
set processors, implementing both the microMIPS and the standard MIPSr32
ISA.

These processors correspond to the M4K and 4KEc CPUs respectively,
except with support for the microMIPS instruction set added, support for
the MCU ASE added and two extra interrupt lines, making a total of 8
hardware interrupts plus 2 software interrupts.  The remaining parts of
the microarchitecture, in particular the pipeline, stayed unchanged.

The presence of the microMIPS ASE is is reflected in the configuration
added.  We currently have no support for the MCU ASE, including in
particular the ACLR, ASET and IRET instructions in either encoding, and
we have no support for the extra interrupt lines, including bits in
CP0.Status and CP0.Cause registers, so these features are not marked,
making our support diverge from real hardware.
Signed-off-by: NSandra Loosemore <sandra@codesourcery.com>
Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Add the 5KEc and 5KEf processors from MIPS Technologies that are the
original implementation of the MIPS64r2 ISA.

Silicon for these processors has never been taped out and no soft cores
were released even.  They do exist though, a CP0.PRId value has been
assigned and experimental RTLs produced at the time the MIPS64r2 ISA has
been finalized.  The settings introduced here faithfully reproduce that
hardware.

As far the implementation goes these processors are the same as the 5Kc
and the 5Kf CPUs respectively, except implementing the MIPS64r2 rather
than the original MIPS64 instruction set.  There must have been some
updates to the CP0 architecture as mandated by the ISA, such as the
addition of the EBase register, although I am not sure about the exact
details, no documentation has ever been produced for these processors.
The remaining parts of the microarchitecture, in particular the
pipeline, stayed unchanged.  Or to put it another way, the difference
between a 5K and a 5KE CPU corresponds to one between a 4K and a 4KE
CPU, except for the 64-bit rather than 32-bit ISA.
Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Set the CP0.Config3.DSP2P bit for the 74kf processor and both that bit
and the CP0.Config3.DSP bit for the artificial mips32r5-generic and
mips64dspr2 processors.  They have the DSPr2 ASE enabled in `insn_flags'
and CPUs that implement that ASE need to have both CP0.Config3.DSP and
CP0.Config3.DSP2P set or software won't detect its presence.
Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
[leon.alrae@imgtec.com: remove DSP flags from mips32r5-generic]
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA support to mips32r5-generic core definition
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add msa_reset() and global msa register (d type only)
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

For Standard TLB configuration (Config.MT=1):

TLBINV invalidates a set of TLB entries based on ASID. The virtual address is
ignored in the entry match. TLB entries which have their G bit set to 1 are not
modified.

TLBINVF causes all entries to be invalidated.

Single TLB entry can be marked as invalid on TLB entry write by having
EntryHi.EHINV set to 1.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

PageGrain needs rw bitmask which differs between MIPS architectures.
In pre-R6 if RIXI is supported, PageGrain.XIE and PageGrain.RIE are writeable,
whereas in R6 they are read-only 1.

On MIPS64 mtc0 instruction left shifts bits 31:30 for MIPS32 backward
compatiblity, therefore there are separate mtc0 and dmtc0 helpers.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

Add U suffix to various places where we shift a 1 left by 31,
to avoid undefined behaviour.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Description of UFR feature:

Required in MIPS32r5 if floating point is implemented and user-mode FR
switching is supported. The UFR register allows user-mode to clear StatusFR
by executing a CTC1 to UFR with GPR[0] as input, and read StatusFR by
executing a CFC1 to UFR.

helper_ctc1 has been extended with an additional parameter rt to check
requirements for UFR feature.
Definition of mips32r5-generic has been modified to include support for UFR.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NEric Johnson <eric.johnson@imgtec.com>

Add CP0_Config5, define rw_bitmask and enable modifications.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NEric Johnson <eric.johnson@imgtec.com>

Add CP0_Config4, define rw_bitmask.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NEric Johnson <eric.johnson@imgtec.com>

Add mips32r5-generic among CPU definitions for MIPS.
Define ISA_MIPS32R3 and ISA_MIPS32R5.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NEric Johnson <eric.johnson@imgtec.com>

34Kf core does support DSP ASE.
CP0_Config3 configuration for 34Kf and description are wrong.

Please refer to MIPS32(R) 34Kf(TM) Processor Core Datasheet
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add 74kf and mips64dspr2-generic-cpu model for test.
Signed-off-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Boards can override the setup if needed.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Replace writeable -> writable
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

fprintf_function uses format checking with GCC_FMT_ATTR.

Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove unused constant MIPS_FCR0
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix regression introduced by d19954f4.

4Kc and 4KEc don't support MIPS16.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>