Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5965 c046a42c-6fe2-441c-8c8c-71466251a162

Mask the initial MSR with the mask from the PowerPC CPU definition.

Noticed by Nathan Froyd.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5964 c046a42c-6fe2-441c-8c8c-71466251a162

When running grub-install (32-bit) on an x86_64 Linux system in qemu, it
hangs on a pagefault forever, because an integer overflow occurs on the
IP on "jmp im". This patch masks overflows for 32 bit IPs on a 64 bit
system, just like it is done for 16 bit IPs already.

Using this patch, x86_64 openSUSE installation works again.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5963 c046a42c-6fe2-441c-8c8c-71466251a162

Current implementation of memory-mapped i8042 controller is atm
implemented with an interface shift (it_shift) parameter, like most all
memory-mapped devices in Qemu.
However, this isn't suitable for MIPS Magnum, where i8042 controller is at
0x80005000 up to 0x80005fff.

Thomas Bogendoerfer (from #mipslinux) tested the behaviour of a real
machine, and found that odd addresses are for status/command register, and
even addresses for data register.

Attached patch implements this behaviour by replacing the it_shift
parameter by a mask one.
Incidentally, keyboard now works on OpenBSD 2.3, which accesses i8042
controller at 0x80005060 and 0x80005061.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5962 c046a42c-6fe2-441c-8c8c-71466251a162

MMIO exits are more expensive in KVM or Xen than in QEMU because they 
involve, at least, privilege transitions.  However, MMIO write 
operations can be effectively batched if those writes do not have side 
effects.

Good examples of this include VGA pixel operations when in a planar 
mode.  As it turns out, we can get a nice boost in other areas too.  
Laurent mentioned a 9.7% performance boost in iperf with the coalesced 
MMIO changes for the e1000 when he originally posted this work for KVM.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5961 c046a42c-6fe2-441c-8c8c-71466251a162

Prior to kvm-80, memory slot deletion was broken in the KVM kernel 
modules.  In kvm-81, a new capability is introduced to signify that this
problem has been fixed.

Since we rely on being able to delete memory slots, refuse to work with 
any kernel module that does not have this capability present.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5960 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5959 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5958 c046a42c-6fe2-441c-8c8c-71466251a162

Paul's comment on my first approach to fix the h2g usage in
page_find_alloc finally open my eyes about what the code is actually
supposed to do:

With the help of h2g_valid we can no cleanly check if a freshly allocate
page (for host usage) is guest-reachable and, in case it is, mark it
reserved in the guest's address range.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5957 c046a42c-6fe2-441c-8c8c-71466251a162

Introduce h2g_valid to check if a given host address can be converted
into a valid guest address.

Based on a patch from  Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5956 c046a42c-6fe2-441c-8c8c-71466251a162

h2g can only work on 64-bit hosts if the provided address is mappable to
the guest range. Neglecting this was already the source for several
bugs. Instrument the macro so that it will trigger earlier in the
future (at least as long as we have this kind of mapping mechanism).

Based on a patch from Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5955 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5954 c046a42c-6fe2-441c-8c8c-71466251a162

Remove some ugly outputs with colorgcc
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5953 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5952 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5951 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5950 c046a42c-6fe2-441c-8c8c-71466251a162

Rework the memory load/store:
- Unify load/store functions for 32-bit and 64-bit CPU
- Don't swap values twice for bit-reverse load/store functions
  in little endian mode.
- On a 64-bit CPU in 32-bit mode, do the address truncation for
  address computation instead of every load store. Truncate the
  address when incrementing the address (if needed)
- Cache writes to access_types.
- Add a few missing calls to gen_set_access_type()
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5949 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5948 c046a42c-6fe2-441c-8c8c-71466251a162

Only fix compilation, probably doesn't run.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5947 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5946 c046a42c-6fe2-441c-8c8c-71466251a162

(Vince Weaver)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5945 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5944 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5943 c046a42c-6fe2-441c-8c8c-71466251a162

Attached patch adds a reset handler to parallel port, so it gets correct
register values after a reset.

(Hervé Poussineau)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5942 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5941 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5940 c046a42c-6fe2-441c-8c8c-71466251a162

This patch simply implement one register of SH4's SCI := Serial Communication Interface.

R2D evaluation board uses SCI for SPI connection.  So, Linux kernel for R2D with
default configuration causes a QEMU assertion failure when it initializes SPI driver.
This patch avoids it and reduces the kernel config modification work for QEMU.

Completing SCI implementation task is left.  Other board support is desirable to confirm
this task, which uses SCI for a serial terminal.

(Shin-ichiro KAWASAKI)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5939 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5938 c046a42c-6fe2-441c-8c8c-71466251a162

SH4 manual say that if a floating point instruction is executed while
FD bit in the status register is 1, an exception should be raised. QEMU
presently does not do that, so the kernel does not initialize FP state
for any thread, nor does it save/restore FP state. The most apparent
consequence is that while recent gcc/libc expect double-precision mode
to be set by kernel, they run in single-precision mode, and all FP code
produces wrong values.

This patch fixes this. It also fixes a couple of places where PC was
not updated before handling an exception, although both those places
deal with invalid instruction and don't lead to any user-visible bugs.

(Vladimir Prus)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5937 c046a42c-6fe2-441c-8c8c-71466251a162

1. hostregs_helper.h: fix comment
2. translate-all.c: rename dyngen_code(_search_pc) to
   tcg_gen_code(_search_pc)
3. tcg.c:
  - rename dyngen_table_op_count to tcg_table_op_count
  - no need to generate a log of dyngen ops generated
  - rename dyngen_code(_search_pc) to tcg_gen_code(_search_pc)
4. tcg.h: rename dyngen_code(_search_pc) to
   tcg_gen_code(_search_pc)
Signed-off-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5936 c046a42c-6fe2-441c-8c8c-71466251a162

Main purpose of this is to delete
       *physical = address & 0x1fffffff;
at target-sh4/helper.c:449, using new mmio rule introduced by #5849
This masking is a nice trick to realize P4/A7 duality of SH registers.
But, IMHO, it is logically wrong.

Most of SH4 cpu control registers in P4 area(0xfc000000...0xffffffff) have
one more address called A7 which is usually P4 address with upper 3bits masked.
This is an address only appears in TLB's physical address part.

Current code use trick writing drivers as if they are really in A7
(that's why you see many *_A7 in hw/sh*.c), and using translation P4 to A7.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5935 c046a42c-6fe2-441c-8c8c-71466251a162

Fixes to be needed for commit #5849 "Change MMIO callbacks..."
 hw/sh7750.c:
  - Divide region of CPU control registers to avoid overlapping
    to peripheral modules.
  - Delete unused var "icr", which had moved to hw/sh_intc.c.
 hw/sm501.c:
  - Merge non page aligned palette registers into the region of
    control registers.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5934 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5933 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds pci support to sh/r2d board.
This is the first user of PCIC support I formerly sent.

PCIC actually is inside of chip with CPU core on SH7751.
But, this code is written as if SH7750 and PCIC are on board.
I care little about physical device boundary, but fitting with qemu's
design.

This patch also adds some BSC (Bus State Controller) registers,
because PCI device driver software have to accesses them.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5932 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5931 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5930 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5929 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5928 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds SuperH on-chip PCI controller(PCIC) support.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5927 c046a42c-6fe2-441c-8c8c-71466251a162

This adds IRQ controller in FPGA on r2d, and use it for CF.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5926 c046a42c-6fe2-441c-8c8c-71466251a162