Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This is consistent with how VirtIOFOOConf variables are named
elsewhere, and makes blk available for BlockBackend variables.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 12c5674b turned it into a pointer to member blk.conf.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I'll use it with block backends shortly, and the name is going to fit
badly there.  It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there.  It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The patch is big, but all it really does is replacing

    dinfo->bdrv

by

    blk_bs(blk_by_legacy_dinfo(dinfo))

The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).

Line wrapping muddies the waters a bit.  I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

BlockBackend's name space is separate only to keep the initial patches
simple.  Time to merge the two.

Retain bdrv_find() and bdrv_get_device_name() for now, to keep this
series manageable.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

device_name[] can become non-empty only in bdrv_new_root() and
bdrv_move_feature_fields().  The latter is used only to undo damage
done by bdrv_swap().  The former is called only by blk_new_with_bs().
Therefore, when a BlockDriverState's device_name[] is non-empty, then
it's been created with a BlockBackend, and vice versa.  Furthermore,
blk_new_with_bs() keeps the two names equal.

Therefore, device_name[] is redundant.  Eliminate it.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

drive_del() has become a trivial wrapper around blk_unref().  Get rid
of it.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

On BlockBackend destruction, unref its BlockDriverState.  Replaces the
callers' unrefs.

This turns the pointer from BlockBackend to BlockDriverState into a
strong reference, managed with bdrv_ref() / bdrv_unref().  The
back-pointer remains weak.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Make the BlockBackend own the DriveInfo.  Change blockdev_init() to
return the BlockBackend instead of the DriveInfo.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Convenience function blk_new_with_bs() creates a BlockBackend with its
BlockDriverState.  Callers have to unref both.  The commit after next
will relieve them of the need to unref the BlockDriverState.

Complication: due to the silly way drive_del works, we need a way to
hide a BlockBackend, just like bdrv_make_anon().  To emphasize its
"special" status, give the function a suitably off-putting name:
blk_hide_on_behalf_of_do_drive_del().  Unfortunately, hiding turns the
BlockBackend's name into the empty string.  Can't avoid that without
breaking the blk->bs->device_name equals blk->name invariant.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

A block device consists of a frontend device model and a backend.

A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.

We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole.  Drawbacks:

* Its API includes both stuff that makes sense only at the block
  backend level (root of the tree) and stuff that's only for use
  within the block layer.  This makes the API bigger and more complex
  than necessary.  Moreover, it's not obvious which interfaces are
  meant for device models, and which really aren't.

* Since device models keep a reference to their backend, the backend
  object can't just be destroyed.  But for media change, we need to
  replace the tree.  Our solution is to make the BlockDriverState
  generic, with actual driver state in a separate object, pointed to
  by member opaque.  That lets us replace the tree by deinitializing
  and reinitializing its root.  This special need of the root makes
  the data structure awkward everywhere in the tree.

The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.

Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState.  This should let us
clean up both APIs, and the tree data structures.

This commit is a first step.  It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.

BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed.  "Root" in the
sense of "in bdrv_states".  They're not yet used for anything; that'll
come shortly.

A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious.  Where these roots get destroyed
isn't always as obvious.

It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect().  That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().

blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364dd "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f01 "blockdev: Introduce
DriveInfo.enable_auto_del").  Objects created by the former get
destroyed by drive_del().

Objects created by blk_connect() get destroyed by blk_disconnect().

BlockBackend is reference-counted.  Its reference count never exceeds
one so far, but that's going to change.

In drive_del(), the BB's reference count is surely one now.  The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job.  In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Creating an anonymous BDS can't fail.  Make that obvious.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Export names may be used with nbd+unix, too, fix nbd_refresh_filename()
accordingly. Also, for nbd+tcp, the documented path schema is
"nbd://host[:port]/export", so use it. Furthermore, as can be seen from
that schema, the port is optional.

That makes six single cases for how the filename can be formatted; it is
not easy to generalize these cases without the resulting statement being
completely unreadable, thus there is simply one snprintf() per case.

Finally, taking the options from BDRVNBDState::socket_opts is wrong,
because those will not contain the export name. Just use
BlockDriverState::options instead.
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

try_fiemap() uses FIEMAP_FLAG_SYNC which has a significant performance
impact.

Prefer seek_hole() over fiemap() to avoid this impact where possible.
seek_hole is more widely used and, arguably, has potential to be
optimised in the kernel.
Reported-By: NMichael Steffens <michael_steffens@posteo.de>
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Pádraig Brady <pbrady@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Using fiemap without FIEMAP_FLAG_SYNC is a known corrupter.

Add the FIEMAP_FLAG_SYNC flag to the FS_IOC_FIEMAP ioctl.  This has
the downside of significantly reducing performance.
Reported-By: NMichael Steffens <michael_steffens@posteo.de>
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Pádraig Brady <pbrady@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When the Qcow2DiscardRegion is adjacent to another one referenced by "d",
free this Qcow2DiscardRegion metadata referenced by "p" after
it was removed from s->discards queue.
Signed-off-by: NZhang Haoyu <zhanghy@sangfor.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch fixes compilation errors when building against glib < 2.16.0
due to the missing g_strcmp0() function.
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Message-id: 1413457177-10132-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga-pci: add qext region to mmio
vga: Remove unused arrays dmask4 and dmask16

# gpg: Signature made Wed 15 Oct 2014 10:12:06 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20141015-1:
  hw/display/vga: Remove unused arrays dmask4 and dmask16
  vga-pci: add qext region to mmio
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

allow changing bootorder via monitor at runtime,
by making bootindex a writable qom property.

* remotes/kraxel/tags/pull-bootindex-20141015-1: (34 commits)
  bootindex: change fprintf to error_report
  bootindex: delete bootindex when device is removed
  bootindex: move calling add_boot_device_patch to bootindex setter function
  ide: add calling add_boot_device_patch in bootindex setter function
  nvma: ide: add bootindex to qom property
  usb-storage: add bootindex to qom property
  virtio-blk: alias bootindex property explicitly for virt-blk-pci/ccw/s390
  block: remove bootindex property from qdev to qom
  virtio-blk: add bootindex to qom property
  ide: add bootindex to qom property
  scsi: add bootindex to qom property
  isa-fdc: remove bootindexA/B property from qdev to qom
  redirect: remove bootindex property from qdev to qom
  vfio: remove bootindex property from qdev to qom
  pci-assign: remove bootindex property from qdev to qom
  host-libusb: remove bootindex property from qdev to qom
  virtio-net: alias bootindex property explicitly for virt-net-pci/ccw/s390
  net: remove bootindex property from qdev to qom
  usb-net: add bootindex to qom property
  vmxnet3: add bootindex to qom property
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch fixes compilation errors when building against glib <2.28.0
due to the missing g_get_monotonic_time() function.

The compilation error in tests/libqos/virtio.c was introduced in commit
70556264 ("libqos: use microseconds
instead of iterations for virtio timeout").

Add a simple g_get_monotonic_time() implementation to glib-compat.h
based on code from vhost-user-test.c.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
[Igor: add G_TIME_SPAN_SECOND, include glib-compat.h in libqtest.h]
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

migration/next for 20141015

# gpg: Signature made Wed 15 Oct 2014 09:21:54 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found

* remotes/juanquintela/tags/migration/20141015:
  migration: catch unknown flag combinations in ram_load
  qemu-file: Move stdio implementation to qemu-file-stdio.c
  qemu-file: Move unix and socket implementations to qemu-file-unix.c
  qemu-file: Use qemu_file_is_writable() on stdio_fclose()
  qemu-file: Make qemu_file_is_writable() non-static
  qemu-file: Add copyright header to qemu-file.c
  vmstate: Allow dynamic allocation for VBUFFER during migration
  block/migration: Disable cache invalidate for incoming migration
  Tests: QEMUSizedBuffer/QEMUBuffer
  QEMUSizedBuffer based QEMUFile
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Following cleanup of the vga device code in commit d2e043a8,
the arrays dmask4 and dmask16 are now unused. gcc doesn't warn
about this, but clang does; remove them.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qemu extented register range to the standard vga mmio bar.
Right nowe there are two registers:  One readonly register returning the
size of the region (so we can easily add more registers there if needed)
and one endian control register, so guests (especially ppc) can flip
the framebuffer endianness as they need it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

The function may be called by qmp command, we should
report error message to the caller.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Device should be removed from global boot list when
it is hot-unplugged.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

On this way, we can assure the new bootindex take effect
during vm rebooting.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

On this way, we can assure the new bootindex take effect
during vm rebooting. Meanwhile set the initial value of
bootindex to -1.

Because ide devcies's unit property maybe
do not initialize when set_bootindex function is called,
so that we don't know its suffix. So we have to save the
call add_boot_device_path() on ide realize/init function.
When we want to change bootindex during vm rebooting, we
can call it in setter function.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

At present, nvma cannot boot. However, it provides already
a bootindex property, so change bootindex to qom for nvma
device, but not call add_boot_device_path.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

Because usb-storage rely on scsi-disk which is created
in usb_msg_realize_storage(), so we should store the SCSIDevice
pointer in MSDState struct. Only in this way, we can change
the global boot_order_list when we want to change the bootindex
during vm rebooting by calling object_property_set_int(Object(SCSIDevice),).
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Since the "bootindex" property is a QOM property and not a qdev property
now, we must alias it explicitly for virtio-blk-pci, as well as CCW and
s390-virtio.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove bootindexA/B form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>