The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations.  Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The old code aborted configure when no emulation target was selected.
Even after removing the 'exit 1', it tried to read from STDIN
when QEMU was configured with

    configure' '--disable-user' '--disable-system'

This is fixed here.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Don't use -ffixed-gN.  Don't link statically.  Don't save/restore
AREG0 around calls.  Don't allocate space on the stack for AREG0 save.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Current code doesn't actually work in 32-bit mode at all.  Since
no one really noticed, drop the complication of v7 and v8 cpus.
Eliminate the --sparc_cpu configure option and standardize macro
testing on TCG_TARGET_REG_BITS / HOST_LONG_BITS
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This reverts commit 66d5499b.

This commit broke --target-list="x86_64-softmmu" and the fix isn't immediatley
obvious.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.

Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.

Remove unused HELPER_CFLAGS.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Acked-by: NAurelien Jarno <aurelien@aurel32.net>

Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUCRISState parameter instead of relying on AREG0, and
use cpu_ld* in translation and interrupt handling. Remove AREG0 swapping
in tlb_fill(). Switch to AREG0 free mode
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Convert code load functions and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Tested-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fixes build against uClibc.

uClibc provides 2 versions of clock_gettime(), one with realtime
support and one without (this is so you can avoid linking in -lrt
unless actually needed). This means that the clock_gettime() don't
need -lrt. We still need it for timer_create() so we check for this
function in addition.

We also need check if -lm is needed for isnan().

Both -lm and -lrt are needed for libs_qga.
Signed-off-by: NNatanael Copa <ncopa@alpinelinux.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Currently, if libseccomp is missing but the user explicitly requested
seccomp support using --enable-seccomp, configure silently ignores the
situation and disables seccomp support.

This is unlike all other tests that explicitly fail in such situation.

Fix that.
Signed-off-by: N"Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>

usbredir is only used by system emulation, so add the libraries to
libs_softmmu instead of LIBS.

Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Until now we used only the agent to change the monitor count and each
monitor resolution. This patch introduces the qemu part of using the
device as the mediator instead of the agent via virtio-serial.

Spice (>=0.11.5) calls the new QXLInterface::client_monitors_config,
which returns wether the interrupt is enabled, and if so and given a non
NULL monitors config will
generate an interrupt QXL_INTERRUPT_CLIENT_MONITORS_CONFIG with crc
checksum for the guest to verify a second call hasn't interfered.

The maximal number of monitors is limited on the QXLRom to 64.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This gives us support for 64 bit ids which is needed for using XHCI with
the new hcd generated ids.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The qemu-img, qemu-nbd and qemu-io tools are built conditionally
based on whether any softmmu target is enabled. These are useful
self-contained tools which can be used in many other scenarios.
Add new --enable-tools/--disable-tools args to configure to allow
the user to explicitly turn on / off their build. The default
behaviour is now to build these tools are all times, regardless
of whether any softmmu target is enabled
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow passing of '--target-list=' to configure to request that
all targets are to be disabled. This allows for doing a very
fast tools-only build of things like qemu-img, qemu-io, qemu-nbd.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 7b93fadf "Add basic version
of bridge helper" put the bridge helper executable into a fixed
${prefix}/libexec/ location, instead of using ${libexecdir} for
this.  At the same time, --libexecdir is being happily ignored
by ./configure.  Even more, the same patch sets unused $libexecdir
variable in the generated config-host.mak, and uses fixed string
(\${prefix}/libexecdir) for the bridge helper binary.

Fix this braindamage by introducing $libexecdir variable, using
it for the bridge helper binary, and recognizing --libexecdir.

This patch is applicable to stable-1.1.
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: Corey Bryant <coreyb@linux.vnet.ibm.com>
Cc: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add an explicit CPUState parameter instead of relying on AREG0.

Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
[agraf: fix conflicts]
Signed-off-by: NAlexander Graf <agraf@suse.de>

valgrind with kvm produces a big amount of false positives regarding
"Conditional jump or move depends on uninitialised value(s)". This
happens because the guest memory is allocated with qemu_vmalloc which
boils down posix_memalign etc. This function is (correctly) considered
by valgrind as returning undefined memory.

Since valgrind is based on jitting code, it will not be able to see
changes made by the guest to guest memory if this is done by KVM_RUN,
thus keeping most of the guest memory undefined.

Now lots of places in qemu will then use guest memory to change behaviour.
To avoid the flood of these messages, lets declare the whole guest
memory as defined. This will reduce the noise and allows us to see real
problems.

In the future we might want to make this conditional, since there
is actually something that we can use those false positives for:
These messages will point to code that depends on guest memory, so
we can use these backtraces to actually make an audit that is focussed
only at those code places. For normal development we dont want to
see those messages, though.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.

[ kraxel: 3 continues to be the default revision.  Once we have a new
          stable spice-server release and the qemu patches to enable
          the new bits merged we'll go flip the switch and make rev4
          the default ]

This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.

On migration reissue spice_qxl_monitors_config_async.

RHBZ: 770842
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

fixup
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a 'query-target' QAPI command to allow management applications
to determine what target architecture a QEMU binary is emulating
without having to parse the binary name or -help output

  $ qmp-shell -p /tmp/qemu
  (QEMU) query-target
  {   u'return': {   u'arch': u'x86_64' }}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adding basic options to the configure script to use libseccomp or not.
The default is set to 'no'. If the flag --enable-libseccomp is used, the
script will check for its existence using pkg-config.
Signed-off-by: NEduardo Otubo <otubo@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2:
 - As I removed all the code related to seccomp from vl.c, I created
   qemu-seccomp.[ch].
 - Also making the configure script to add the specific line to
   Makefile.obj in order to compile with appropriate support to seccomp.

v2 -> v3:
 - Removing the line from Makefile.obj and adding it to Makefile.objs.
 - Marking libseccomp default option to 'yes' in the configure script.

v3 -> v8:
 - fix configure probe if libseccomp isn't available (aliguori)

MacOSX 10.8 ("Mountain Lion") requires us to compile our one
Objective-C source file with clang even if the rest of QEMU
requires a real gcc, because the system headers we use make
use of Apple's "Blocks" extension to C/ObjC, and mainline
gcc doesn't support that. Since we only need to use a true
gcc for the parts of QEMU that use the fixed-register
env variable, we can simply use clang to build the ObjC
file: it will link to the gcc-built objects with no problems.

Add the necessary support for an OBJCC variable in the
makefile and configure machinery; we default to clang
if we have it, otherwise whatever CC is (since gcc
might be the Apple gcc which does support Blocks).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

MacOSX 10.8 ("Mountain Lion") defaults to trying to use automated
reference counting on certain objects.  This means that the system
header files will use some Objective C syntax constructs even when
compiling pure C, which confuses mainline gcc. Suppress this by
setting OS_OBJECT_USE_OBJC=0. This avoids a compile error like this:

In file included from
/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:5:0,
                 from /usr/include/os/object.h:74,
                 from /usr/include/dispatch/dispatch.h:48,
                 from /System/Library/Frameworks/IOKit.framework/Headers/IOKitLib.h:56,
                 from block/raw-posix.c:35:
/System/Library/Frameworks/Foundation.framework/Headers/NSObjCRuntime.h:409:1: error: stray ‘@’ in program
[with a large number of further run-on errors]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Both MacOS and Solaris have special case handling for the CPU
type, because the check_define probes will return i386 even if
the hardware is 64 bit and x86_64 would be preferable. Move
these checks earlier in the configure probing so that we can
do them only if the user didn't specify a CPU with --cpu. This
fixes a bug where the user's command line argument was being
ignored.
Reviewed-by: NAndreas F=E4rber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "KOI8-R" character set.  ]
    [ Some special characters may be displayed incorrectly. ]

Since we moved pcspk into hwlib, CONFIG_PCSPK is no longer defined per
target. Therefore, statically built soundhw array in arch_init.c stopped
including this card.

Work around this by re-adding this define to config-target.mak.
Long-term, a dynamic creation of this soundhw list will be necessary.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

Add an explicit CPUX86State parameter instead of relying on AREG0.

Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

In the old QMP days, this code was used to find out QMP commands that
might be calling monitor_printf() down its call chain.

This is almost impossible to happen today, because the qapi converted
commands don't even have a monitor object. Besides, it's been more than
a year since I used this last time.

Let's just drop it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Configuring with Clang compiler with -Werror would not work after
improved checks:
/tmp/qemu-conf--25992-.c:4:32: error: self-comparison always evaluates
to true [-Werror,-Wtautological-compare]
int main(void) { return preadv == preadv; }
/tmp/qemu-conf--25992-.c:13:26: error: self-comparison always
evaluates to true [-Werror,-Wtautological-compare]
    return epoll_create1 == epoll_create1;
/tmp/qemu-conf--25992-.c:3:13: error: explicitly assigning a variable
of type 'char **' to itself [-Werror,-Wself-assign]
    environ = environ;

Avoid the errors by adjusting the tests.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add support for checking whether test case code can compile without
warnings, by recompiling each successful test with -Werror. If the
-Werror version doesn't pass, we bail out. This gives us the same
level of visibility of warnings in test code as --enable-werror
provides for the main compile.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds unicore32-softmmu build support, include configure,
makefile, arch_init, and all missing functions needed by softmmu.
Although all missing functions are empty, unicore32-softmmu could
be build successfully.
By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The code creating the symlink from linux-headers/asm to the
architecture specific linux-headers/asm-$arch directory was
implicitly hardcoding a list of KVM supporting architectures.
Add a default case for the common "Linux architecture name and
QEMU CPU name match" case, so future architectures will only
need to add code if they've managed to get mismatched names.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The Xen 4.1 probe never uses the return value from xc_interface_open(),
so was provoking a compiler warning on newer gcc. Fix by not bothering
to put the return value anywhere.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>