cmpl:  invalid bit mask should be 0x00400001
bctar: invalid bit mask should be 0x0000E000
Signed-off-by: NAvinesh Kumar <avinesku@linux.vnet.ibm.com>
Signed-off-by: NRajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

stxvb16x: Store VSX Vector Byte*16

Vector (8-bit elements):
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Store results in following:

Little/Big-endian Storage
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

lxvb16x: Load VSX Vector Byte*16

Little/Big-endian Storage
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Vector load results in (8-bit elements):
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

stxvh8x:  Store VSX Vector Halfword*8

Vector (16-bit elements):
+------+------+------+------+------+------+------+------+
| 0001 | 1011 | 2021 | 3031 | 4041 | 5051 | 6061 | 7071 |
+------+------+------+------+------+------+------+------+

Store results in following:

Big-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 00 01 | 10 11 | 20 21 | 30 31 | 40 41 | 50 51 | 60 61 | 70 71 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Little-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 01 00 | 11 10 | 21 20 | 31 30 | 41 40 | 51 50 | 61 60 | 71 70 |
+-------+-------+-------+-------+-------+-------+-------+-------+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[dwg: Tweak commit description]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

lxvh8x:  Load VSX Vector Halfword*8

Big-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 00 01 | 10 11 | 20 21 | 30 31 | 40 41 | 50 51 | 60 61 | 70 71 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Little-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 01 00 | 11 10 | 21 20 | 31 30 | 41 40 | 51 50 | 61 60 | 71 70 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Vector load results in (16-bit elements):
+------+------+------+------+------+------+------+------+
| 0001 | 1011 | 2021 | 3031 | 4041 | 5051 | 6061 | 7071 |
+------+------+------+------+------+------+------+------+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[dwg: Tweak to commit description]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Manipulate data and store 8bytes instead of 4bytes.

Vector (32-bit elements):
+----------+----------+----------+----------+
| 00112233 | 44556677 | 8899AABB | CCDDEEFF |
+----------+----------+----------+----------+

Store results in following:

Big-Endian Storage
+-------------+-------------+-------------+-------------+
| 00 11 22 33 | 44 55 66 77 | 88 99 AA BB | CC DD EE FF |
+-------------+-------------+-------------+-------------+

Little-Endian Storage
+-------------+-------------+-------------+-------------+
| 33 22 11 00 | 77 66 55 44 | BB AA 99 88 | FF EE DD CC |
+-------------+-------------+-------------+-------------+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Load 8byte at a time and manipulate.

Big-Endian Storage
+-------------+-------------+-------------+-------------+
| 00 11 22 33 | 44 55 66 77 | 88 99 AA BB | CC DD EE FF |
+-------------+-------------+-------------+-------------+

Little-Endian Storage
+-------------+-------------+-------------+-------------+
| 33 22 11 00 | 77 66 55 44 | BB AA 99 88 | FF EE DD CC |
+-------------+-------------+-------------+-------------+

Vector load results in (32-bit elements):
+----------+----------+----------+----------+
| 00112233 | 44556677 | 8899AABB | CCDDEEFF |
+----------+----------+----------+----------+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[dwg: Slight tweak to commit description]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

mtvsrdd: Move To VSR Double Doubleword
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

mfvsrld: Move From VSR Lower Doubleword
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Now that 2.7 is released, create the pseries-2.8 machine type and add the
boilerplate compatiblity macro stuff.  There's nothing new to put into the
2.7 compatiliby properties yet, but we'll need something eventually, so
we might as well get it ready now.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The firmware of the pseries machine, SLOF, is able to load files via
IPv6 networking, too. So to test both, network bootloading on ppc64
and IPv6 (via Slirp) , let's add some PXE tests for this environment,
too. Since we can not use the normal x86 boot sector for network boot
loading, we use a simple Forth script on ppc64 instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

A typo introduced in f19661c8 prevents qemu from building when configured
with --enable-trace-backend=dtrace.
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Block layer patches

# gpg: Signature made Thu 29 Sep 2016 14:11:30 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  oslib-posix: add a configure switch to debug stack usage
  coroutine-sigaltstack: use helper for allocating stack memory
  coroutine-ucontext: use helper for allocating stack memory
  coroutine: add a macro for the coroutine stack size
  coroutine-sigaltstack: rename coroutine struct appropriately
  oslib-posix: add helpers for stack alloc and free
  block: Remove qemu_root_bds_opts
  block: Move 'discard' option to bdrv_open_common()
  block: Use 'detect-zeroes' option for 'blockdev-change-medium'
  block: Parse 'detect-zeroes' in bdrv_open_common()
  block/qapi: Move 'aio' option to file driver
  block/qapi: Use separate options type for curl driver
  block: Drop aio/cache consistency check from qmp_blockdev_add()
  block: Fix error path in qmp_blockdev_change_medium()
  block-backend: remove blk_flush_all
  qemu: use bdrv_flush_all for vm_stop et al
  block: reintroduce bdrv_flush_all
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * Netduino 2 improvements (SPI, ADC devices)
 * fix some Mainstone key mappings
 * vmstateify tsc210x, tsc2005
 * virt: add 2.8 machine type
 * virt: support in-kernel GICv3 ITS
 * generic-loader device
 * A64: fix iss_sf decoding in disas_ld_lit
 * correctly handle 'sub pc, pc, 1' for ARMv6

# gpg: Signature made Tue 04 Oct 2016 13:41:34 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20161004: (27 commits)
  target-arm: Correctly handle 'sub pc, pc, 1' for ARMv6
  target-arm: A64: Fix decoding of iss_sf in disas_ld_lit
  cadence_gem: Fix priority queue out of bounds access
  docs: Add a generic loader explanation document
  generic-loader: Add a generic loader
  ARM: Virt: ACPI: Add GIC ITS description in ACPI MADT table
  ACPI: Add GIC Interrupt Translation Service Structure definition
  arm/virt: Add ITS to the virt board
  hw/intc/arm_gicv3_its: Implement support for in-kernel ITS emulation
  kvm-all: Pass requester ID to MSI routing functions
  target-arm: move gicv3_class_name from machine to kvm_arm.h
  hw/intc/arm_gicv3_its: Implement ITS base class
  hw/intc/arm_gic(v3)_kvm: Initialize gsi routing
  hw/arm/virt: add 2.8 machine type
  vmstateify tsc210x
  vmstateify tsc2005
  hw/arm: Fix Integrator/CM initialization
  mainstone: Add mapping for dot, slash and backspace.
  mainstone: Fix incorrect key mapping for Enter key.
  MAINTAINERS: Add Alistair to the maintainers list
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In the ARM v6 architecture, 'sub pc, pc, 1' is not an interworking
branch, so the computed new value is written to r15 as a normal
value. The architecture says that in this case, bits [1:0] of
the value written must be ignored if we are in ARM mode (or
bit [0] ignored if in Thumb mode); this is a change from the
ARMv4/v5 specification that behaviour is UNPREDICTABLE.
Use the correct mask on the PC value when doing a non-interworking
store to PC.

A popular library used on RaspberryPi uses this instruction
as part of a trick to determine whether it is running on
ARMv6 or ARMv7, and we were mishandling the sequence.

Fixes bug: https://bugs.launchpad.net/bugs/1625295

Reported-by: <stu.axon@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1474380941-4730-1-git-send-email-peter.maydell@linaro.org

Fix the decoding of iss_sf in disas_ld_lit.
The SF (Sixty-Four) field in the ISS (Instruction Specific Syndrome)
is a bit that specifies the width of the register that the
instruction loads to.

If cleared it specifies 32 bits.
If set it specifies 64 bits.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1475230780-8669-1-git-send-email-edgar.iglesias@gmail.com
[PMM: tweaked phrasing per on-list discussion]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

There was an error with some of the register implementation assuming
there are 16 priority queues supported when the IP only supports 8. This
patch corrects the registers to only support 8 queues.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 33bf2d28326d22875602234b8b15cf56fb678333.1474911607.git.alistair.francis@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 9d991a2df990cf55e2630410a5a03ea48930af5d.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a generic loader to QEMU which can be used to load images or set
memory values.

Internally inside QEMU this is a device. It is a strange device that
provides no hardware interface but allows QEMU to monkey patch memory
specified when it is created. To be able to do this it has a reset
callback that does the memory operations.

This device allows the user to monkey patch memory. To be able to do
this it needs a backend to manage the datas, the same as other
memory-related devices. In this case as the backend is so trivial we
have merged it with the frontend instead of creating and maintaining a
seperate backend.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 10f2a9dce5e5e11b6c6d959415b0ad6ee22bcba5.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If GIC ITS is supported, add description in ACPI MADT table, then guest
could use ITS when booting with ACPI.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-9-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ACPI Spec 6.0 introduces GIC Interrupt Translation Service Structure.
Here we add the definition of the Structure.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-8-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If supported by the configuration, ITS will be added automatically.

This patch also renames v2m_phandle to msi_phandle because it's now used
by both MSI implementations.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-7-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The ITS control frame is in-kernel emulated while accesses to the
GITS_TRANSLATER are mediated through the KVM_SIGNAL_MSI ioctl (MSI
direct MSI injection advertised by the CAP_SIGNAL_MSI capability)

the kvm_gsi_direct_mapping is explicitly set to false to emphasize the
difference with GICv2M. Direct mapping cannot work with ITS since
the content of the MSI data is not the target interrupt ID but an
eventd id.

GSI routing is advertised (kvm_gsi_routing_allowed) as well as
msi/irqfd signaling (kvm_msi_via_irqfd_allowed).

The MSI frame (GITS_TRANSLATER) absolute GPA is computed on first
kvm_its_send_msi() call. It is then passed through KVM_SIGNAL_MSI
ioctl.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-6-git-send-email-eric.auger@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Introduce global kvm_msi_use_devid flag plus associated
kvm_msi_devid_required() macro. Passes the device ID,
if needed, while building the MSI route entry. Device IDs are
required by the ARM GICv3 ITS (IRQ remapping function is based on
this information).
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-5-git-send-email-eric.auger@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Machine.c contains code related to migration. Let's move
gicv3_class_name to kvm_arm.h instead.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-4-git-send-email-eric.auger@redhat.com
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is the basic skeleton for both KVM and software-emulated ITS.
Since we already prepare status structure, we also introduce complete
VMState description. But, because we currently have no migratable
implementations, we also set unmigratable flag.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-3-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Advertise gsi routing and set up irqchip routing entries for
GIC SPIs.

This is not mandated as long as MSI routing is not used
(because the kernel sets a default irqchip routing table).
However once MSI routing gets used (for VIRTIO-PCI vhost for
example), the first call to KVM_SET_GSI_ROUTING overrides the
kernel default irqchip table.

If no routing entry exists for the GSI, any IRQFD signaling for
this GSI will fail.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-2-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1474641676-25017-1-git-send-email-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

I'm now saving all 3 of the pll entries; only 2 were saved before.
There are a couple of times that were previously stored as offsets
from 'now' calculated before saving;  with vmstate it's easier
to store the 'now' and fix it up on reload.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1474977735-10156-3-git-send-email-dgilbert@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

I've converted the fields in it's main data structure
to fixed size types in ways that look sane.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1474977735-10156-2-git-send-email-dgilbert@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Initialization of a class instance cannot depend on its own properties
as these are not yet set.  Move parts of integratorcm_init() that depend
on the "memsz" property to the newly added integratorcm_realize().

This fixes: https://bugs.launchpad.net/qemu/+bug/1624726Signed-off-by: NJakub Jermar <jakub@jermar.eu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add missed out mappings. These mappings are from the "Intel PXA27x
Processor Developer's Kit User Guide".
Signed-off-by: NVijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: NDeepak S. <deepak@zilogic.com>
Message-id: 1475063033-8176-3-git-send-email-vijaykumar@zilogic.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

According to the manual the (5, 5) corresponds to backspace key, and
not Enter key. Linux kernel maps (5, 4) to the enter key. Fixing it up
to match the mapping in the Linux kernel.
Signed-off-by: NVijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: NDeepak S. <deepak@zilogic.com>
Message-id: 1475063033-8176-2-git-send-email-vijaykumar@zilogic.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add Alistair Francis as the maintainer for the Netduino 2
and SMM32F205 SoC.
Signed-off-by: NAlistair Francis <alistair@alistair23.me>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a46ccf398b050a41cc3b3d0e94bcff4ce2d85e0.1474742262.git.alistair@alistair23.me
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Connect the SPI devices to the STM32F205 SoC.
Signed-off-by: NAlistair Francis <alistair@alistair23.me>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d05849120420f8db0d9aa053bd23134c33cd9180.1474742262.git.alistair@alistair23.me
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Connect the ADC devices to the STM32F205 SoC.
Signed-off-by: NAlistair Francis <alistair@alistair23.me>
Message-id: 6214eda399da7b47014f6f895be25323d52dbc9e.1474742262.git.alistair@alistair23.me
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAlistair Francis <alistair@alistair23.me>
Message-id: 52e5d361e3b5a0ea8554aca73ee65ae2b586112e.1474742262.git.alistair@alistair23.me
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>