Abstract helper function to check migration capabilities (from the old
qmp_migrate_set_capabilities).  Prepare to be used somewhere else.

There is side effect on the change: when applying the capabilities, we
were skipping the invalid ones, but still applying the valid ones (if
they are provided in the same QMP request). After this refactoring,
we'll ignore all the capabilities if we detected invalid setup along the
way. However, I don't think it is a problem since general users should
not provide anything invalid after all.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-9-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Since commit a15215f3 ("build: remove --enable-colo/--disable-colo"),
colo is always supported. We don't need any colo_supported() now since
it is always true. Removing any extra code that depends on it.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-8-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Adding validity check for the migration parameters passed in via global
properties.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Message-Id: <1500349150-13240-7-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Abstracted from qmp_migrate_set_parameters().
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-6-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Helper to check the parameters. Abstracted from
qmp_migrate_set_parameters().
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-5-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Do the same thing to migration capabilities, just like what we did in
previous patch for migration parameters.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-4-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Export migration parameters to qdev properties. Then we can use, for
example:

  -global migration.x-cpu-throttle-initial=xxx

To specify migration parameters during init.

Prefix "x-" is appended for each parameter exported to show that this is
not a stable interface, and only for debugging/testing purpose.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-3-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We have nearly all the stuff, but this one is missing. Add it in.

Am going to use this new helper for MigrationParameters fields, since
most of them are int64_t.

CC: Markus Armbruster <armbru@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: Marc-André Lureau <marcandre.lureau@redhat.com>
CC: Peter Xu <peterx@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-2-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

When we issue a cancel and clean up the RDMA channel
send a CONTROL_ERROR to get the destination to quit.

The rdma_cleanup code waits for the event to come back
from the rdma_disconnect; but that wont happen until the
destination quits and there's currently nothing to force
it.

Note this makes the case of a cancel work while the destination
is alive, and it already works if the destination is
truly dead.  Note it doesn't fix the case where the destination
is hung (we get stuck waiting for the rdma_disconnect event).
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-7-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

control_desc[] is an array of strings that correspond to a
series of message types; they're used only for error messages, but if
the message type is seriously broken then we could go off the end of
the array.

Convert the array to a function control_desc() that bound checks.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Message-Id: <20170717110936.23314-6-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

When waiting for a WRID, if the other side dies we end up waiting
for ever with no way to cancel the migration.
Cure this by poll()ing the fd first with a timeout and checking
error flags and migration state.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-5-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The two places that 'goto err_block_for_wrid' weren't setting ret
and so would end up returning 0 even though we've failed.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-4-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Closing the file before exit on a failure allows
the source to cleanup better, especially with RDMA.

Partial fix for https://bugs.launchpad.net/qemu/+bug/1545052Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Message-Id: <20170717110936.23314-3-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Fix a race where the destination might try and send the source a
WRID_READY before the source has done a post-recv for it.

rdma_post_recv has to happen after the qp exists, and we're
OK since we've already called qemu_rdma_source_init that calls
qemu_alloc_qp.

This corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=1285044

The race can be triggered by adding a few ms wait before this
post_recv_control (which was originally due to me turning on loads of
debug).
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-2-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

qemu-ga patch queue

* new command: qemu-get-osinfo
* build fix for OpenBSD
* better error-reporting for failure on keyfile dump
* remove redundant initialization of qa_state global
* include libpcre in w32 package
* w32 localization fixes for service installation/registration

v2:
* fix build issue with older GCCs introduced with guest_get_osinfo
* relocated some declarations in guest_get_osinfo

# gpg: Signature made Tue 18 Jul 2017 11:52:45 BST
# gpg:                using RSA key 0x3353C9CEF108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg:                 aka "Michael Roth <mdroth@utexas.edu>"
# gpg:                 aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D  3FA0 3353 C9CE F108 B584

* remotes/mdroth/tags/qga-pull-2017-07-17-v2-tag:
  test-qga: add test for guest-get-osinfo
  test-qga: pass environemnt to qemu-ga
  qemu-ga: add guest-get-osinfo command
  qga: report error on keyfile dump error
  qga-win32: remove a redundancy code
  qemu-ga: check if utmpx.h is available on the system
  qemu-ga: add missing libpcre to MSI build
  qga-win: fix installation on localized windows
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 17 Jul 2017 16:40:18 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block: fix shadowed variable in bdrv_co_pdiscard
  util/aio-win32: Only select on what we are actually waiting for
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add test for guest-get-osinfo command.

Qemu-ga was modified to accept QGA_OS_RELEASE environment variable. If
the variable is defined it is interpreted as path to the os-release file
and it is parsed instead of the default paths.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
* move declarations to beginning of functions
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Modify fixture_setup() to pass environemnt variables to spawned qemu-ga
instance.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Add a new 'guest-get-osinfo' command for reporting basic information of
the guest operating system. This includes machine architecture,
version and release of the kernel and several fields from os-release
file if it is present (as defined in [1]).

[1] https://www.freedesktop.org/software/systemd/man/os-release.htmlSigned-off-by: NVinzenz Feenstra <vfeenstr@redhat.com>
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>
* moved declarations to beginning of functions
* dropped unecessary initialization of struct utsname
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Queued target/mips patches

# gpg: Signature made Mon 17 Jul 2017 15:50:27 BST
# gpg:                using RSA key 0xBA9C78061DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg:                 aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg:                 aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77  196D BA9C 7806 1DDD 8C9B

* remotes/aurel/tags/pull-target-mips-20170717:
  target/mips: optimize WSBH, DSBH and DSHD
  mips: set CP0 Debug DExcCode for SDBBP instruction
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * new model of the ARM MPS2/MPS2+ FPGA based development board
 * clean up DISAS_* exit conditions and fix various regressions
   since commits e75449a3 8a6b28c7 (in particular including
   ones which broke OP-TEE guests)
 * make Cortex-M3 and M4 correctly default to 8 PMSA regions

# gpg: Signature made Mon 17 Jul 2017 13:43:45 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20170717:
  MAINTAINERS: Add entries for MPS2 board
  hw/arm/mps2: Add ethernet
  hw/arm/mps2: Add SCC
  hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller
  hw/arm/mps2: Add timers
  hw/char/cmsdk-apb-timer: Implement CMSDK APB timer device
  hw/arm/mps2: Add UARTs
  hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UART
  hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board models
  target/arm: use DISAS_EXIT for eret handling
  target/arm: use gen_goto_tb for ISB handling
  target/arm/translate: ensure gen_goto_tb sets exit flags
  target/arm/translate.h: expand comment on DISAS_EXIT
  target/arm/translate: make DISAS_UPDATE match declared semantics
  include/exec/exec-all: document common exit conditions
  target/arm: Make Cortex-M3 and M4 default to 8 PMSA regions
  qdev: support properties which don't set a default value
  qdev-properties.h: Explicitly set the default value for arraylen properties
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 17 Jul 2017 13:17:17 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  virtio-net: fix offload ctrl endian
  virtion-net: Prefer is_power_of_2()
  docs/colo-proxy.txt: Update colo-proxy usage of net driver with vnet_header
  net/filter-rewriter.c: Make filter-rewriter support vnet_hdr_len
  net/colo-compare.c: Add vnet packet's tcp/udp/icmp compare
  net/colo.c: Add vnet packet parse feature in colo-proxy
  net/colo-compare.c: Make colo-compare support vnet_hdr_len
  net/colo-compare.c: Introduce parameter for compare_chr_send()
  net/colo.c: Make vnet_hdr_len as packet property
  net/filter-mirror.c: Add new option to enable vnet support for filter-redirector
  net/filter-mirror.c: Make filter mirror support vnet support.
  net/filter-mirror.c: Introduce parameter for filter_send()
  net/net.c: Add vnet_hdr support in SocketReadState
  net: Add vnet_hdr_len arguments in NetClientState
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Cc:qemu-trivial@nongnu.org
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

In the first line of run_agent,it has set ga_state = s,don't need
set ga_state = s again behind.
Signed-off-by: NPeng Hao <peng.hao2@zte.com.cn>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Commit 161a56a9 added command guest-get-users and requires the
utmpx.h (defined by POSIX) to work. It is however not always available
(e.g. on OpenBSD) therefor a check for its existence is necessary.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

glib depends on libpcre which was not shipped with the MSI, thus
starting of the qemu-ga.exe failed with the respective error message.

Tell WIXL to ship this library with the MSI to avoid this problem.
Signed-off-by: NThomas Lamprecht <t.lamprecht@proxmox.com>
CC: Stefan Weil <sw@weilnetz.de>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1357789
Replace hardcoded user and group names ("Administrators", "SYSTEM") with the ones acquired from system. Windows uses localized strings for these names and it may cause the installation to fail.
Windows has Well-known SIDs for "Administrators" group and "SYSTEM" user so they were used to identify required users and groups.
Well-known SIDs: https://support.microsoft.com/en-us/help/243330/well-known-security-identifiers-in-windows-operating-systemsSigned-off-by: NDaniel Rempel <daniel@daynix.com>
Signed-off-by: NSameeh Jubran <sjubran@redhat.com>
Reviewed-by: NSameeh Jubran <sameeh@daynix.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

# gpg: Signature made Mon 17 Jul 2017 13:11:17 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace: update old trace events in docs
  trace: [trivial] Statically enable all guest events
  trace: [tcg, trivial] Re-align generated code
  trace: [tcg] Do not generate TCG code to trace dynamically-disabled events
  exec: [tcg] Use different TBs according to the vCPU's dynamic tracing state
  trace: [tcg] Delay changes to dynamic state when translating
  trace: Allocate cpu->trace_dstate in place
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ehci fix for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:40:00 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20170717-pull-request:
  ehci: add sanity check for maxframes
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio-gpu migration fix for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:41:49 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20170717-pull-request:
  virtio-gpu: skip update cursor in post_load if we don't have one
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ui: vnc and keymap updates for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:38:11 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20170717-pull-request:
  keymaps: fr-ca: add missing keys
  hmp: Update info vnc
  vnc: Set default kbd delay to 10ms
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We've had a shadowed 'ret' variable, which risks returning the wrong
value, introduced in commit b9c64947.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20170710150559.30163-1-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 9307b70e9876c4e9e3c4478524a32a23a3d5dd05.1499368180.git.alistair.francis@xilinx.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use the same mask to avoid having to load two different constants.
Suggested-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch fixes setting DExcCode field of CP0 Debug register
when SDBBP instruction is executed. According to EJTAG specification,
this field must be set to the value 9 (Bp).
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170502120350.3368.92338.stgit@PASHA-ISP
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

audio: fixes for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:29:08 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20170717-pull-request:
  audio/adlib: remove limitation of one adlib card
  audio/fmopl: modify timer callback to give opaque and channel parameters in two arguments
  audio: st_rate_flow exist a infinite loop
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pull request

# gpg: Signature made Mon 17 Jul 2017 10:04:11 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ipxe-pull-request:
  ipxe: update to commit 0600d3ae94
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Quite a while has passed since we last updated U-Boot for e500. This patch
bumps it to the last released version 2017.07 to make sure users don't feel
like they're using out of date software.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Tested-by: NThomas Huth <thuth@redhat.com>
Message-id: 1499862868-102130-1-git-send-email-agraf@suse.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add entries to the MAINTAINERS file for the new MPS2
board and devices.

Since the CMSDK devices are not specific to the MPS2 board,
extend the existing 'PrimeCell' section to cover CMSDK
devices as well; in both cases these are devices implemented
by ARM and provided as RTL that may be used in multiple
SoCs and boards.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-10-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

The MPS2 FPGA images support ethernet via a LAN9220. We use
QEMU's LAN9118 model, which is software compatible except
that it is missing the checksum-offload feature.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-9-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>