g_thread_create() was deprecated in favor of g_thread_new() and
g_cond_new() was deprecated in favor of GCond initialization.  If the
host has glib 2.31 or newer, avoid using the deprecated functions.

This patch solves compiler warnings that are generated when glib's
deprecated functions are used.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360676045-9204-3-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Juan reported that RHEL 6.4 hosts give compiler warnings because we use
unsigned int while glib prototypes use volatile gint in trace/simple.c.

  trace/simple.c:223: error: pointer targets in passing argument 1 of 'g_atomic_int_compare_and_exchange' differ in signedness

These variables are only accessed with glib atomic int functions so
let's play it by the book and use volatile gint.
Reported-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360676045-9204-2-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Atmel, SST and Intel/Numonyx serial flash tend to power up
with the software protection bits set.
And thus the new m25p80.c in linux kernel would always tries
to use WREN(0x06) + WRSR(0x01) to turn-off the protection.

The WEL(0x02) of status register is supposed to be cleared after
WRSR(0x01). There are also some drivers (i.e mine for RTOSes)
would check the WEL(0x02) in status register to make sure the
protection is correctly turned off.
Signed-off-by: NKuo-Jung Su <dantesu@faraday-tech.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1360602348-4727-1-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The incoming migration is processed in a coroutine and uses an fd read
handler to enter the yielded coroutine when data becomes available.

The read handler was set too broadly, so that spurious coroutine entries
were be triggered if other coroutine users yielded (like the block
layer's bdrv_write() function).

Install the fd read only only when yielding for more data to become
available.  This prevents spurious coroutine entries which break code
that assumes only a specific set of places can re-enter the coroutine.

This patch fixes crashes in block/raw-posix.c that are triggered with
"migrate -b" when qiov becomes a dangling pointer due to a spurious
coroutine entry that frees qiov early.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360598505-5512-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The libqos driver for omap_i2c currently does not work on Big Endian.
Introduce helpers for reading from and writing to 16-bit armel registers.

This fixes tmp105-test failures on ppc.

To prepare for a QTest-level endianness solution, poison mem{read,write}
and always use the helpers. Adopt the expected signatures.
To avoid an unused variable warning, assert the STAT Single Byte Data
bit but, due to it not getting cleared, only it being set when len == 1.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Message-id: 1360600914-5448-3-git-send-email-afaerber@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

On 32-bit hosts, unsigned long may be uint32_t and uint64_t may be
unsigned long long. Account for this by always using strtoull().
We were already using strtoll() for int64_t.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1360600914-5448-2-git-send-email-afaerber@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The [qtest_]in[bwl]() functions/macros don't have a value argument.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1360604139-16797-1-git-send-email-afaerber@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The size calculated from the CHS values is not the real image (disk) size,
but usually a smaller value. This is caused by rounding effects.

Only older operating systems use CHS. Such guests won't be able to use
the whole disk. All modern operating systems use the real size.

This patch fixes https://bugs.launchpad.net/qemu/+bug/1105670/.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Message-id: 1360265212-22037-1-git-send-email-sw@weilnetz.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The .save_live_iterate() function returns 0 to continue iterating or 1
to stop iterating.

Since 16310a3c it only ever returns 0,
leading to an infinite loop.

Return 1 if we have finished sending dirty blocks.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1360534366-26723-4-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 43be3a25 changed the
blk_mig_save_dirty_block() return code handling.  The function's doc
comment says:

  /* return value:
   * 0: too much data for max_downtime
   * 1: few enough data for max_downtime
   */

Because of the 1 return value, callers must check for ret < 0 instead of
just:

  if (ret) { ... }

We do not want to bail when 1 is returned, only on error.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360534366-26723-3-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Show the actual flags value and include "block migration" in the error
message so it's clear where the error is coming from.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360534366-26723-2-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We exit successfully after reporting syntax error for argument of
--sandbox and --add-fd.

We continue undaunted after reporting it for argument of -boot,
--option-rom and --object.

Change all five to exit unsuccessfully, like the other options.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-7-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

qemu_opts_parse() reports the error already, and in a much more useful
way.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-6-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

commit 8be7e7e4 and commit ec7b2ccb messed up the ordering of error
message and the helpful explanation that should follow it, like this:

    $ qemu-system-x86_64 --nodefaults -S --vnc :0 --chardev null,id=,
    Identifiers consist of letters, digits, '-', '.', '_', starting with a letter.
    qemu-system-x86_64: -chardev null,id=,: Parameter 'id' expects an identifier

    $ qemu-system-x86_64 --nodefaults -S --vnc :0 --machine kvm_shadow_mem=dunno
    You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.
    qemu-system-x86_64: -machine kvm_shadow_mem=dunno: Parameter 'kvm_shadow_mem' expects a size

Pity.  Disable them for now.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-5-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 6daf194d and be62a2eb got rid of a bunch, but they keep coming
back.  Tracked down with this Coccinelle semantic patch:

    @r@
	expression err, eno, cls, fmt;
	position p;
    @@
    (
	error_report(fmt, ...)@p
    |
	error_set(err, cls, fmt, ...)@p
    |
	error_set_errno(err, eno, cls, fmt, ...)@p
    |
	error_setg(err, fmt, ...)@p
    |
	error_setg_errno(err, eno, fmt, ...)@p
    )
    @script:python@
	fmt << r.fmt;
	p << r.p;
    @@
    if "\\n" in str(fmt):
	print "%s:%s:%s:%s" % (p[0].file, p[0].line, p[0].column, fmt)
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-4-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use error_printf() instead, so the help gets presented more nicely.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-3-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The arguments of error_report() should yield a short error string
without newlines.

A few places try to print additional help after the error message by
embedding newlines in the error string.  That's nice, but let's do it
the right way.

Since I'm touching these lines anyway, drop a stray preposition and
some tabs.  We don't use tabs for similar messages elsewhere.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-2-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Peter Maydell
# Via Luiz Capitulino
* luiz/queue/qmp:
  tests/test-string-input-visitor: Handle errors provoked by fuzz test

Update OpenBIOS images to SVN r1097 built from submodule.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The IRQ number of the second EHCI controller should be 76, not 75.
Signed-off-by: NLiming Wang <walimisdev@gmail.com>
Tested-by: NPeter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There is a buffer overflow in libcurl POP3/SMTP/IMAP.  The workaround is
simple: disable extra protocols so that they cannot be exploited.  Full
details here:

  http://curl.haxx.se/docs/adv_20130206.html

QEMU only cares about HTTP, HTTPS, FTP, FTPS, and TFTP.  I have tested
that this fix prevents the exploit on my host with
libcurl-7.27.0-5.fc18.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The new multiqueue feature adds fields to the virtio device config, which
breaks Windows guests. Disable the feature by default until the Windows
drivers are fixed.
Signed-off-by: NJesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently, the config size for virtio devices is hard coded. When a new
feature is added that changes the config size, drivers that assume a static
config size will break. For purposes of backward compatibility, there needs
to be a way to inform drivers of the config size needed to accommodate the
set of features enabled.

aliguori: merged in
 - hw/virtio-net: use existing macros to implement endof
 - hw/virtio-net: fix config_size data type
Signed-off-by: NJesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

1ceef9f2 added handling for cleaning
up multiple queues in qemu_del_nic() for cases where multiqueue is in
use. To determine the number of queues it looks at nic->conf->queues,
then iterates through all the queues to cleanup the associated
NetClientStates. If no queues are found, no NetClientStates are deleted.

However, nic->conf->queues is only set when a peer is created via
-netdev or netdev_add, and is otherwise 0. This causes us to spin in
net_cleanup() if we attempt to shut down qemu before adding a host
device.

Since qemu_new_nic() unconditionally creates at least 1
queue/NetClientState at queue idx 0, make qemu_del_nic() always attempt
to clean it up.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's OK and expected for visitors to return errors when presented with
the fuzz test's random data. Since the fuzzer doesn't care about
errors, we pass in NULL rather than an Error**. This fixes a bug in
the fuzzer where it was passing the same Error** into each visitor,
with the effect that once one visitor returned an error, each later
visitor would notice that it had been passed in an Error** representing
an already set error, and do nothing.

For the case of visit_type_str() we also need to handle the case where
an error means that the visitor doesn't set our char*. We initialize
the pointer to NULL so we can safely g_free() it regardless of whether
the visitor allocated a string for us or not.

This fixes a problem where this test failed the MacOSX malloc()
consistency checks and might segfault on other platforms [due
to calling free() on an uninitialized pointer variable when
visit_type_str() failed.].
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* 'for-linux-user' of https://git.gitorious.org/qemu-m68k/qemu-m68k:
  linux-user: correct reboot()
  linux-user: correct setsockopt()
  linux-user: correct print_timeval() swap tv_sec and tv_usec
  linux-user: correct msgrcv()
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 658f2dc9 accidentally dropped the cast to the target type of
the value loaded by get_user().  The most visible effect of this would
be that the sequence "uint64_t v; get_user_u32(v, addr)" would sign
extend the 32 bit loaded value into v rather than zero extending as
would be expected for a _u32 accessor.  Put the cast back again to
restore the old behaviour.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When the pxa2xx performance counter related cp14 registers were converted
from a switch-statement implementation to the new table driven cpregs
format in commit dc2a9045, the crn and crm values for all these
registers were accidentally transposed. Fix this mistake, which was
causing OpenBSD for Zaurus to fail to boot.
Reported-by: NJonathan Gray <jsg@jsg.id.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Markus Armbruster
# Via Stefan Hajnoczi
* stefanha/tracing:
  trace: Fix location of simpletrace.py in docs
  trace: Clean up the "try to update atomic until it worked" loops
  trace: Direct access of atomics is verboten, use the API
  trace: Fix simple trace dropped event record for big endian

# By Michael Tokarev (1) and Stefan Weil (1)
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
  vnc: recognize Hungarian doubleacutes
  target-m68k: Fix comment

As a general rule, HMP commands must be built on top of the QMP API.
Luiz and others have worked long & hard to make HMP conform to this
rule.

Commit f1088908 added chardev-add, in violation of this rule.  QMP
command chardev-add was added right before, with minimal features, and
the idea to complete it step by step, then switch over the HMP command
to use it.

Unfortunately, we're not there, yet, and we don't want to release with
chardev-add in a "HMP is more powerful than QMP" state.

Disable the HMP command for now, along with its chardev-remove buddy.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

New device, has never been released, so we can still improve things
without worrying about compatibility.

Naming is a mess.  The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO".  "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver.  Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory.  Therefore:

* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
  "ringbuf" in the API.

* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.

* Rename device parameter from maxcapacity to size (simple words are
  good for you).

* Clearly mark the parameter as optional in documentation.

* Fix error reporting so that chardev-add reports to current monitor,
  not stderr.

* Replace cirmem in C identifiers by ringbuf.

* Rework documentation.  Document the impact of our crappy UTF-8
  handling on reading.

* QMP examples that even work.

I could split this up into multiple commits, but they'd change the
same documentation lines multiple times.  Not worth it.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Inline trivial cirmem_chr_is_empty() into its only caller.

Rename qemu_chr_cirmem_count() to cirmem_count().

Fast ring buffer index wraparound.  Without this, there's no point in
restricting size to a power two.

qemu_is_chr(chr, "memory") returns *zero* when chr is a memory
character device, which isn't what I'd expect.  Replace it by the
saner and more obviously correct chr_is_cirmem().  Also avoids
encouraging testing for specific character devices elsewhere.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is a new device, so there's no compatibility to maintain, and its
use case isn't common enough to justify shorthand syntax.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>