- 19 1月, 2012 1 次提交
-
-
由 Andreas Färber 提交于
Commit cbcfa041 (link the main loop and its dependencies into the tools) introduced stray usages of int64. Use int64_t instead. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 14 1月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 12月, 2011 1 次提交
-
-
由 Paolo Bonzini 提交于
Using the main loop code from QEMU enables tools to operate fully asynchronously. Advantages include better Windows portability (for some definition of portability) over glib's. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 22 11月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
Now when you try to migrate with qed, you get: (qemu) migrate tcp:localhost:1025 Block format 'qed' used by device 'ide0-hd0' does not support feature 'live migration' (qemu) Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 9月, 2011 1 次提交
-
-
由 Frediano Ziglio 提交于
qemu_service_io was mainly an alias to qemu_notify_event, currently used only by PPC for timer hack, so call qemu_notify_event directly. Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 18 5月, 2011 1 次提交
-
-
由 Stefan Hajnoczi 提交于
Block drivers may use timers for flushing metadata to disk or reconnecting to a network drive. Stub out the following functions in qemu-tool.c: QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, int scale, QEMUTimerCB *cb, void *opaque) void qemu_free_timer(QEMUTimer *ts) void qemu_del_timer(QEMUTimer *ts) void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time) int64_t qemu_get_clock_ns(QEMUClock *clock) They will result in timers never firing when linked against qemu-tool.o. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 16 4月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 15 3月, 2011 1 次提交
-
-
由 Kevin Wolf 提交于
It's wrong to call BHs directly, even in tools. The only operations that schedule BHs are called in a loop that (indirectly) contains a call to qemu_bh_poll anyway, so we're not losing the scheduled BHs: Tools either use synchronous functions, which are guaranteed to have completed (including any BHs) when they return; or if they use asynchronous functions, they need to call qemu_aio_wait() or similar functions already today. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 30 10月, 2010 1 次提交
-
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 23 10月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Move timer init functions to a new file, qemu-timer-common.c. Make other critical timer functions inlined to preserve performance in qemu-timer.c, also move muldiv64() (used by the inline functions) to qemu-timer.h. Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly. Remove a similar/duplicate definition in qemu-tool.c. Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used there. After this change, tracing can be used also for user code and simpletrace on Win32. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 27 3月, 2010 1 次提交
-
-
由 Markus Armbruster 提交于
The location tracking interface is used by code shared with qemi-img, qemu-nbd and qemu-io, so it needs to be available there. Commit 827b0813 provides it in a rather hamfisted way: it adds a dummy implementation to qemu-tool.c. It's cleaner to provide the real thing, and put a few more dummy monitor functions into qemu-tool.c. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 20 3月, 2010 1 次提交
-
-
由 Juan Quintela 提交于
It was always only used for reads Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 16 3月, 2010 4 次提交
-
-
由 Markus Armbruster 提交于
New struct Location holds a location. So far, the only location is LOC_NONE, so this doesn't do anything useful yet. Passing the current location all over the place would be too cumbersome. Hide it away in static cur_loc instead, and provide accessors. Print it in error_report(). Store it in QError, and print it in qerror_print(). Store it in QemuOpt, for use by qemu_opts_foreach(). This makes error_report() do the right thing when it runs within qemu_opts_foreach(). We may still have to store it in other data structures holding user input for better error messages. Left for another day.
-
由 Markus Armbruster 提交于
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
-
由 Markus Armbruster 提交于
-
由 Markus Armbruster 提交于
-
- 03 12月, 2009 1 次提交
-
-
由 Luiz Capitulino 提交于
Asynchronous events are generated with a call to monitor_protocol_event(). This function builds the right data-type and emit the event right away. The emitted data is always a JSON object and its format is as follows: { "event": json-string, "timestamp": { "seconds": json-number, "microseconds": json-number }, "data": json-value } This design is based on ideas by Amit Shah <amit.shah@redhat.com>. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 11月, 2009 1 次提交
-
-
由 Naphtali Sprei 提交于
Now qemu_error can be called also from shared files, e.g. block.c. Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 10月, 2009 1 次提交
-
-
由 Kevin Wolf 提交于
Add the possibility to use AIO and BHs without allowing foreign callbacks to be run. Basically, you put your own AIOs and BHs in a separate context. For details see the comments in the source. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 7月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
I used the following command to enable debugging: perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/* Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 06 3月, 2009 1 次提交
-
-
由 aliguori 提交于
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 06 2月, 2009 1 次提交
-
-
由 aliguori 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6531 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 01 12月, 2008 1 次提交
-
-
由 aurel32 提交于
Fix data type (this fixes a warning from sparse) Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5834 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 29 10月, 2008 1 次提交
-
-
由 pbrook 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5571 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 09 10月, 2008 1 次提交
-
-
由 aliguori 提交于
Replace signalfd with signal handler/pipe. There is no way to interrupt the CPU execution loop when a file descriptor becomes readable. This results in a large performance regression in sparc emulation during bootup. This patch switches us to signal handler/pipe which was originally suggested by Ian Jackson. The signal handler lets us interrupt the CPU emulation loop while the write to a pipe lets us avoid the select/signal race condition. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5451 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 15 9月, 2008 1 次提交
-
-
由 aliguori 提交于
Right now, we sprinkle #if defined(QEMU_IMG) && defined(QEMU_NBD) all over the code. It's ugly and causes us to have to build multiple object files for linking against qemu and the tools. This patch introduces a new file, qemu-tool.c which contains enough for qemu-img, qemu-nbd, and QEMU to all share the same objects. This also required getting qemu-nbd to be a bit more Windows friendly. I also changed the Windows block-raw to use normal IO instead of overlapping IO since we don't actually do AIO yet on Windows. I changed the various #if 0's to #if WIN32_AIO to make it easier for someone to eventually fix AIO on Windows. After this patch, there are no longer any #ifdef's related to qemu-img and qemu-nbd. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5226 c046a42c-6fe2-441c-8c8c-71466251a162
-