Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 06 11月, 2017 2 次提交
    • D
      build: allow automatic git submodule updates to be disabled · f62bbee5
      由 Daniel P. Berrange 提交于 
      Some people building QEMU use VPATH builds where the source directory is on a
read-only volume. In such a case 'scripts/git-submodules.sh update' will always
fail and users are required to run it manually themselves on their original
writable source directory.

While this is already supported, it is nice to give users a command line flag
to configure to permanently disable automatic submodule updates, as it means
they won't get hard to diagnose failures from git-submodules.sh at an arbitrary
later date.

This patch thus introduces a flag '--disable-git-update' which will prevent
'make' from ever running 'scripts/git-submodules.sh update'. It will still run
the 'status' command to determine if a submodule update is needed, but when it
does this it'll simply stop and print a message instructing the developer what
todo. eg

$ ./configure  --target-list=x86_64-softmmu --disable-git-update
...snip...

$ make
  GEN     config-host.h
  GEN     trace/generated-tcg-tracers.h
  GEN     trace/generated-helpers-wrappers.h
  GEN     trace/generated-helpers.h
  GEN     trace/generated-helpers.c
  GEN     module_block.h

GIT submodule checkout is out of date. Please run
  scripts/git-submodule.sh update ui/keycodemapdb
from the source directory checkout /home/berrange/src/virt/qemu

make: *** [Makefile:31: git-submodule-update] Error 1
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      f62bbee5
    • D
      build: allow setting a custom GIT binary for transparent proxying · cc84d63a
      由 Daniel P. Berrange 提交于 
      Some users can't run a bare 'git' command, due to need for a transparent
proxying solution such as 'tsocks'. This adds an argument to configure to
let users specify such a thing:

  ./configure --with-git="tsocks git"

The submodule script is also updated to give the user a hint about using this
flag, if we fail to checkout modules.
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      cc84d63a
  3. 26 10月, 2017 1 次提交
  5. 19 10月, 2017 1 次提交
    • A
      build: Fix dtc-checkout race condition in Makefile · 00525864
      由 Aaron Lindsay 提交于 
      This was introduced by:
    commit aef45d51
    Author: Daniel P. Berrange <berrange@redhat.com>
    Date:   Fri Sep 29 11:11:56 2017 +0100

	build: automatically handle GIT submodule checkout for dtc

On my system, I see the following with a fresh clone:

% ./configure --disable-gtk --target-list=aarch64-softmmu
% make -j8
  GEN     aarch64-softmmu/config-devices.mak.tmp
  GEN     config-host.h
mkdir -p dtc/libfdt
  GIT     ui/keycodemapdb dtc
mkdir -p dtc/tests
  GEN     qemu-options.def
[snip]
  GEN     migration/trace.h
make: *** [git-submodule-update] Error 1
make: *** Waiting for unfinished jobs....

Upon closer inspection, the root cause of the error is:

% git submodule update --init ui/keycodemapdb dtc
fatal: destination path 'dtc' already exists and is not an empty directory.
Clone of 'git://git.qemu-project.org/dtc.git' into submodule path 'dtc' failed

This patch fixes this race condition by forcing the 'dtc/%' rule which caused
'dtc' to be non-empty to wait on '.git-submodule-status'.
Signed-off-by: NAaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Acked-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1508352023-28591-1-git-send-email-alindsay@codeaurora.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
      00525864
  7. 17 10月, 2017 2 次提交
  9. 16 10月, 2017 4 次提交
    • G
      tools: add qemu-keymap · 6a021536
      由 Gerd Hoffmann 提交于 
      qemu-keymap generates qemu reverse keymaps from xkb keymaps,
which can be used with the qemu "-k" command line switch.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20171005153330.19210-2-kraxel@redhat.com
      6a021536
    • D
      ui: convert common input code to keycodemapdb · bcd5ac9b
      由 Daniel P. Berrange 提交于 
      Replace the number_to_qcode, qcode_to_number and linux_to_qcode
tables with automatically generated tables.

Missing entries in linux_to_qcode now fixed:

  KEY_LINEFEED -> Q_KEY_CODE_LF
  KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS
  KEY_COMPOSE -> Q_KEY_CODE_COMPOSE
  KEY_AGAIN -> Q_KEY_CODE_AGAIN
  KEY_PROPS -> Q_KEY_CODE_PROPS
  KEY_UNDO -> Q_KEY_CODE_UNDO
  KEY_FRONT -> Q_KEY_CODE_FRONT
  KEY_COPY -> Q_KEY_CODE_COPY
  KEY_OPEN -> Q_KEY_CODE_OPEN
  KEY_PASTE -> Q_KEY_CODE_PASTE
  KEY_CUT -> Q_KEY_CODE_CUT
  KEY_HELP -> Q_KEY_CODE_HELP
  KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT

In addition, some fixes:

 - KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of
   KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes
   sets, while KEY_PLAYCD only appears in AT set1, so the former is
   a more useful mapping.

Missing entries in qcode_to_number now fixed:

  Q_KEY_CODE_AGAIN -> 0x85
  Q_KEY_CODE_PROPS -> 0x86
  Q_KEY_CODE_UNDO -> 0x87
  Q_KEY_CODE_FRONT -> 0x8c
  Q_KEY_CODE_COPY -> 0xf8
  Q_KEY_CODE_OPEN -> 0x64
  Q_KEY_CODE_PASTE -> 0x65
  Q_KEY_CODE_CUT -> 0xbc
  Q_KEY_CODE_LF -> 0x5b
  Q_KEY_CODE_HELP -> 0xf5
  Q_KEY_CODE_COMPOSE -> 0xdd
  Q_KEY_CODE_KP_EQUALS -> 0x59
  Q_KEY_CODE_MEDIASELECT -> 0xed

In addition, some fixes:

 - Q_KEY_CODE_MENU was incorrectly mapped to the compose
   scancode (0xdd) and is now mapped to 0x9e
 - Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
   of to 0xe041 (Find)
 - Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
   instead of of 0x77 (Hirigana)
 - Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined
   scan code in AT set 1, it is now mapped to 0x54 (sysrq)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-5-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
      bcd5ac9b
    • D
      ui: add keycodemapdb repository as a GIT submodule · 92712822
      由 Daniel P. Berrange 提交于 
      The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.

It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com

[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
      92712822
    • D
      build: automatically handle GIT submodule checkout for dtc · aef45d51
      由 Daniel P. Berrange 提交于 
      Currently if DTC is required by configure and not available in the host
OS install, we exit with an error message telling the user to checkout a
git submodule or install the library.

This introduces automatic handling of the git submodule checkout process
and enables it for dtc. This only runs if building from GIT, so users of
release tarballs still need the system library install. The current state
of the git checkout is stashed in .git-submodule-status, and a helper
program is used to determine if this state matches the desired submodule
state. A dependency against 'Makefile' ensures that the submodule state
is refreshed at the start of the build process
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-2-berrange@redhat.com

[ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ]
[ kraxel: fix Makefile dependencies ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

[fixup] Makefile dep
      aef45d51
  11. 11 10月, 2017 2 次提交
  13. 26 9月, 2017 1 次提交
  15. 23 9月, 2017 2 次提交
    • P
      scsi: add multipath support to qemu-pr-helper · fe8fc5ae
      由 Paolo Bonzini 提交于 
      Proper support of persistent reservation for multipath devices requires
communication with the multipath daemon, so that the reservation is
registered and applied when a path comes up.  The device mapper
utilities provide a library to do so; this patch makes qemu-pr-helper.c
detect multipath devices and, when one is found, delegate the operation
to libmpathpersist.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      fe8fc5ae
    • P
      scsi: build qemu-pr-helper · b855f8d1
      由 Paolo Bonzini 提交于 
      Introduce a privileged helper to run persistent reservation commands.
This lets virtual machines send persistent reservations without using
CAP_SYS_RAWIO or out-of-tree patches.  The helper uses Unix permissions
and SCM_RIGHTS to restrict access to processes that can access its socket
and prove that they have an open file descriptor for a raw SCSI device.

The next patch will also correct the usage of persistent reservations
with multipath devices.

It would also be possible to support for Linux's IOC_PR_* ioctls in
the future, to support NVMe devices.  For now, however, only SCSI is
supported.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      b855f8d1
  17. 22 9月, 2017 1 次提交
  19. 19 9月, 2017 1 次提交
  21. 13 9月, 2017 1 次提交
    • G
      pixman: drop submodule · c12b6d70
      由 Gerd Hoffmann 提交于 
      Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more.  While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
      c12b6d70
  23. 04 9月, 2017 9 次提交
  25. 15 8月, 2017 1 次提交
  27. 31 7月, 2017 1 次提交
  29. 20 7月, 2017 1 次提交
  31. 14 7月, 2017 1 次提交
    • C
      pc-bios/s390: add s390-netboot.img · 6c5359e1
      由 Christian Borntraeger 提交于 
      It's already possible to do a network boot of an s390x guest with an
external netboot image based on a Linux installation, but it would
be much more convenient if the s390-ccw firmware supported network
booting right out of the box, without the need to assemble such an
external image first.

This is an s390-netboot.img that can be used for network booting.
You can download a combined kernel + initrd image via TFTP
by starting QEMU for example with:

 qemu-system-s390x ... -device virtio-net,netdev=n1,bootindex=1 \
       -netdev user,id=n1,tftp=/path/to/tftp,bootfile=kernel.img

Note that this version does not support downloading via config
files (i.e. pxelinux config files or .INS config files) yet. This
will be added later.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
      6c5359e1
  33. 15 6月, 2017 4 次提交
    • F
      vhost-user-scsi: Introduce a vhost-user-scsi sample application · 49cc0340
      由 Felipe Franciosi 提交于 
      This commit introduces a vhost-user-scsi backend sample application. It
must be linked with libiscsi and libvhost-user.

To use it, compile with:
  $ make vhost-user-scsi

And run as follows:
  $ ./vhost-user-scsi -u vus.sock -i iscsi://uri_to_target/
  $ qemu-system-x86_64 --enable-kvm -m 512 \
      -object memory-backend-file,id=mem,size=512m,share=on,mem-path=guestmem \
      -numa node,memdev=mem \
      -chardev socket,id=vhost-user-scsi,path=vus.sock \
      -device vhost-user-scsi-pci,chardev=vhost-user-scsi \

The application is currently limited at one LUN only and it processes
requests synchronously (therefore only achieving QD1). The purpose of
the code is to show how a backend can be implemented and to test the
vhost-user-scsi Qemu implementation.

If a different instance of this vhost-user-scsi application is executed
at a remote host, a VM can be live migrated to such a host.
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-5-git-send-email-felipe@nutanix.com>
      49cc0340
    • P
      qemu-doc: include version number · 44cb280d
      由 Paolo Bonzini 提交于 
      Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      44cb280d
    • P
      docs: create interop/ subdirectory · d59157ea
      由 Paolo Bonzini 提交于 
      This is for the future interoperability & management guide.  It includes
the QAPI docs, including the automatically generated ones, other socket
protocols (vhost-user, VNC), and the qcow2 file format.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      d59157ea
    • T
      Makefile: Do not generate files if "configure" has not been run yet · 428952cf
      由 Thomas Huth 提交于 
      When doing a "make -j10" in the vanilla QEMU source tree (without
running "configure" first), the Makefile currently generates two
files already, qemu-version.h and qemu-options.def. This should not
happen, so let's only build the generated files if config-host.mak
is available (i.e. "configure" has been run already).
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1496926799-13040-1-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      428952cf
  35. 11 5月, 2017 1 次提交
  37. 21 4月, 2017 1 次提交
    • X
      trace: Put all trace.o into libqemuutil.a · 3d1baccb
      由 Xu, Anthony 提交于 
      Currently all trace.o are linked into qemu-system, qemu-img,
qemu-nbd, qemu-io etc., even the corresponding components
are not included.
Put all trace.o into libqemuutil.a that the linker would only pull in .o
files containing symbols that are actually referenced by the
program.

Signed-off -by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
      3d1baccb
  39. 21 3月, 2017 1 次提交
  41. 19 3月, 2017 1 次提交
  43. 16 3月, 2017 1 次提交
    • M
      qapi: Clean up build of generated documentation · bd7f9747
      由 Markus Armbruster 提交于 
      Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its
user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches
qemu-ga-ref.texi.

Build the intermediate .texi next to the sources and the final output
in docs/ instead of dumping them into the build root.

Fix version.texi dependencies so that only the targets that actually
need it depend on it.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>
      bd7f9747