提交 · 49ab747f668f421138d5b40d83fa279c4c5e278d · openeuler / qemu

09 4月, 2013 4 次提交

hw: move target-independent files to subdirectories · 49ab747f

由 Paolo Bonzini 提交于 3月 01, 2013

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

49ab747f

P
moxie: configure with default-configs file · ce3b494c
由 Paolo Bonzini 提交于 3月 27, 2013
```
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
```
ce3b494c
P
hw: make subdirectories for devices · 1fd6bb44
由 Paolo Bonzini 提交于 2月 04, 2013
```
Prepare the new directory structure.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
```
1fd6bb44

hw: move headers to include/ · 0d09e41a

由 Paolo Bonzini 提交于 2月 05, 2013

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

0d09e41a

06 4月, 2013 3 次提交

usb-storage: Forward serial number to scsi-disk · 76534da7

由 Kevin Wolf 提交于 4月 03, 2013

usb-storage takes care to fetch the USB serial number from -drive
options, but it neglected to pass its own 'serial' property to the
scsi-disk it creates. With this patch, the 'serial' qdev property and
the 'serial' option in -drive behave the same and correctly apply the
serial number on both USB and SCSI level.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>

76534da7

hw/nand.c: Fix nand erase operation · 32aea752

由 Wendy Liang 提交于 4月 03, 2013

Usually, nand erase operation has only 2 or 3 address cycles.
We need to mask s->addr to zero unset stale high-order bytes in the nand address
before using it as the erase address.

This fixes the NAND erase operation in Linux.

[PC: Generalised to work for any number of address cycles rather than just 3]
Signed-off-by: NWendy Liang <jliang@xilinx.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1364967188-26711-1-git-send-email-peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

32aea752

cadence_uart: Flush queued characters on reset · 1db8b5ef

由 Peter Crosthwaite 提交于 4月 03, 2013

Reset can be used to empty the rx-fifo. As the fifo full condition is
used to return false from can_receive, queued rx data should be flushed
on reset accordingly.

Cc: Wendy Liang <jliang@xilinx.com>
Cc: Jason Wu <huanyu@xilinx.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reported-by: NJason Wu <huanyu@xilinx.com>
Message-id: 494c1e005e225c915d295ddfd75d992ad2dabc3c.1364964526.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

1db8b5ef

05 4月, 2013 27 次提交

pl330: Don't inhibit ES bits on INTEN · fd7f8a99

由 Peter Crosthwaite 提交于 4月 02, 2013

This if-else logic inhibits setting of the event status (ES) bits
when interrupts are enabled. This is incorrect. ES should be set
regardless on INTEN state. INTEN only inhibits the signalling of
events to PL330 threads, not setting of the ES register.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

fd7f8a99

Allow xen guests to plug disks of 1 TiB or more · 9246ce88

由 Felipe Franciosi 提交于 4月 05, 2013

The current xen backend driver implementation uses int64_t variables
to store the size of the corresponding backend disk/file. It also uses
an int64_t variable to store the block size of that image. When writing
the number of sectors (file_size/block_size) to xenstore, however, it
passes these values as 32 bit signed integers. This will cause an
overflow for any disk of 1 TiB or more.

This patch changes the xen backend driver to use a 64 bit integer write
xenstore function.
Signed-off-by: NFelipe Franciosi <felipe@paradoxo.org>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

9246ce88

Introduce 64 bit integer write interface to xenstore · 10bb3c62

由 Felipe Franciosi 提交于 4月 05, 2013

The current implementation of xen_backend only provides 32 bit integer
functions to write to xenstore. This patch adds two functions that
allow writing 64 bit integers (one generic function and another for
the backend only).

This patch also fixes the size of the char arrays used to represent
these integers as strings (originally 32 bytes, however no more than
12 bytes are needed for 32 bit integers and no more than 21 bytes are
needed for 64 bit integers).
Signed-off-by: NFelipe Franciosi <felipe@paradoxo.org>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

10bb3c62

Xen PV backend: Disable use of O_DIRECT by default as it results in crashes. · c1a88ad1

由 Alex Bligh 提交于 4月 05, 2013

Due to what is almost certainly a kernel bug, writes with O_DIRECT may
continue to reference the page after the write has been marked as
completed, particularly in the case of TCP retransmit. In other
scenarios, this "merely" risks data corruption on the write, but with
Xen pages from domU are only transiently mapped into dom0's memory,
resulting in kernel panics when they are subsequently accessed.

This brings PV devices in line with emulated devices.  Removing
O_DIRECT is safe as barrier operations are now correctly passed
through.

See:
   http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
for more details.
Signed-off-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

c1a88ad1

Xen PV backend: Move call to bdrv_new from blk_init to blk_connect · 86f425db

由 Alex Bligh 提交于 4月 05, 2013

This commit delays the point at which bdrv_new (and hence blk_open
on the underlying device) is called from blk_init to blk_connect.
This ensures that in an inbound live migrate, the block device is
not opened until it has been closed at the other end. This is in
preparation for supporting devices with open/close consistency
without using O_DIRECT. This commit does NOT itself change O_DIRECT
semantics.
Signed-off-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

86f425db

pflash_cfi01: Implement migration support · d8d24fb7

由 Peter Maydell 提交于 4月 05, 2013

Add a vmstate to pflash_cfi01, so that it can be live migrated.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1363717469-30980-3-git-send-email-peter.maydell@linaro.org

d8d24fb7

pflash_cfi01: Drop unused 'bypass' field · 5d79b80b

由 Peter Maydell 提交于 4月 05, 2013

For pflash_cfi01 the 'bypass' field is set to zero and never changes,
so remove it (it is a leftover from pflash_cfi02, where bypass is
implemented).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1363717469-30980-2-git-send-email-peter.maydell@linaro.org

5d79b80b

hw/arm_gic_common: Use vmstate struct rather than save/load functions · 2e19a703

由 Peter Maydell 提交于 4月 05, 2013

Update the GIC save/restore to use vmstate rather than hand-rolled
save/load functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 1363975375-3166-4-git-send-email-peter.maydell@linaro.org

2e19a703

arm_gic: Fix sizes of state fields in preparation for vmstate support · c3037774

由 Peter Maydell 提交于 4月 05, 2013

In preparation for switching to vmstate for migration support, fix
the sizes of various GIC state fields. In particular, we replace all
the bitfields (which VMState can't deal with) with straightforward
uint8_t values which we do bit operations on. (The bitfields made
more sense when NCPU was set differently in different situations,
but we now always model at the architectural limit of 8.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1363975375-3166-3-git-send-email-peter.maydell@linaro.org

c3037774

hw/onenand.c: fix migration of dynamically allocated buffer "otp" · b79269b7

由 Igor Mitsyanko 提交于 4月 05, 2013

VMSTATE_BUFFER_UNSAFE should be used for buffers inlined in device state, not
for buffers allocated dynamically. Change to VMSTATE_BUFFER_POINTER_UNSAFE macro,
which will do migration right.
Signed-off-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1362923278-4080-4-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

b79269b7

hw/sd.c: fix migration of dynamically allocated buffer "buf" · 5f00679e

由 Igor Mitsyanko 提交于 4月 05, 2013

VMSTATE_BUFFER_UNSAFE should be used for buffers inlined in device state, not
for buffers allocated dynamically. Change to VMSTATE_BUFFER_POINTER_UNSAFE macro,
which will do migration right.
Signed-off-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NMichael Walle <michael@walle.cc>
Message-id: 1362923278-4080-3-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

5f00679e

hw/arm_mptimer: Save the timer state · 28092a23

由 Peter Maydell 提交于 4月 05, 2013

Add a missing VMSTATE_TIMER() entry to the arm_mptimer vmstate
description; this omission meant that we would probably hang on reload
when the timer failed to fire.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1363967348-3044-1-git-send-email-peter.maydell@linaro.org

28092a23

pl050: Don't send always-constant is_mouse field · e8945b4f

由 Peter Maydell 提交于 4月 05, 2013

The is_mouse field of the pl050 state structure is constant (it tracks
whether this is a 'pl050_keyboard' or 'pl050_mouse'), so there's
no need to include it in the VMState structure.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1363628480-29306-1-git-send-email-peter.maydell@linaro.org

e8945b4f

hw/arm/nseries: don't print to stdout or stderr · 591f73f6

由 Peter Maydell 提交于 4月 05, 2013

Remove various bits of printing to stdout or stderr from the
nseries code, replacing it with a qemu log message where there's
an appropriate log category, and just dropping the output for
some of the more debug-like printing.

In particular, this will get rid of the 'mipid_reset' message
you currently get from 'make check'.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1363368565-24546-1-git-send-email-peter.maydell@linaro.org

591f73f6

xilinx_zynq: Cleanup ssi_create_slave · f1922e36

由 Peter Crosthwaite 提交于 4月 04, 2013

With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave().
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

f1922e36

petalogix_ml605_mmu: Cleanup ssi_create_slave() · e641080f

由 Peter Crosthwaite 提交于 4月 04, 2013

With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave().
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

e641080f

pc_acpi_init(): don't bail as soon as failing to find default DSDT · c5a98cf3