s390-sclp-event-facility creates s390-sclp-events-bus
and immediately sets its allow_hotplug field to 0,
which is NOP since it's already 0 by default.

Also since BUS is not hotpluggable, it's not possible
to call SCLP_EVENT{ DeviceClass::unplug } callback
from qdev_unplug() making this unreachable code,
so drop it as well.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Bus by default is not hotpluggable.
virtio-mmio-bus and its parent types do not set allow_hotplug
anywhere explicitly, so remove not needed field access
and wrapper along with it.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

virtio-pci-bus is an internal object of composite
virtio-pci device and it doesn't participate in
-device/device_add hotplug flow, and since it's
not required by bus_add_child() that BUS must
be hotpluggable to be able to add child at runtime,
it's possible to drop not needed 'allow_hotplug'
field.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Since bus_add_child() no longer cares if BUS is hotpluggable
or not, there is no need in setting allow_hotplug field.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Check is too restrictive and does not allow
to add children to just created bus during hotplug
when the bus is part of composite device.

Removing check from bus_add_child() doesn't affect
devices creatable with device_add/del commands since
they have a similar builtin check and patch will
allow to create complex composite devices during
hotplug.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

To be used for conversion of SCSI and USB devices,
and would allow to make every HBA/USB host switch
to HotplugHandler API without touching each controller
explicitly.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It will be used in shallow conversion from legacy hotplug
mechanism and eventually replace all the uses of old mechanism
DeviceClass::unplug = qdev_simple_unplug_cb()
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It is to be called for actual device removal and
will allow to separate request and removal handling
phases of x86-CPU devices and also it's a handler
to be called for synchronously removable devices.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

'HotplugHandler.unplug' callback is currently used as async
call to issue unplug request for device that implements it.
Renaming 'unplug' callback to 'unplug_request' should help to
avoid confusion about what callback does and would allow to
introduce 'unplug' callback that would perform actual device
removal when guest is ready for it.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It will allow explicitly mark device as not hotpluggable and
avoid its creation with following error at realize time
and destroying it afterwards anyway. Instead of it will
error out even before instance of device is created.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It would allow to transparently switch detection whether Bus
is hotpluggable from allow_hotplug field to hotplug_handler
link and to drop allow_hotplug field once all users are
converted to hotplug handler API.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

checks that it's possible to hotplug usb-uas HBA and
then if it's possible to hot(un)plug scsi-disk to it.
Thest basically covers hot(un)plug on dummy HBAs
without means of hot(un)plug notification of the guest.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

usb-storage is different from usual usb devices
in that it uses a child SCSI bus for underlying storage.
This commit verifies that the SCSI bus is hotpluggable, as
hotplug operation wouldn't succeed without it.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

use usb-tablet as a hotplugged usb device.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move code necessary for testing uhci port into library
so it could be used by other USB tests.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Functions will be used for testing hot(un)plug of PCI devices.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

object_property_add_alias() is called at some
places at present. And its parameter errp may not NULL,
such as
 object_property_add_alias(obj, "iothread", OBJECT(&dev->vdev),"iothread",
                              &error_abort);
This patch add error handler for security.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Avoid the caller of object_property_print() leaking string
argument's memory, such as qdev_print_props() when
encounter errors.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Within the object that contains the GPIO output. This allows for
connecting GPIO outputs via setting of a Link property.

Also clear the link value to zero. This catch-alls the case
where a device improperly inits a gpio_out (malloc instead of
malloc0).
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

To the device that contains them. This will allow for referencing
a GPIO input from it's canonical path (exciting for dynamic machine
generation!)
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Only allow a GPIO name to be one or the other. Inputs and outputs are
functionally different and should be in different namespaces. Prepares
support for the QOMification of IRQs as Links or Child objects.

The alternative is to munge names .e.g. with "-in" or "-out" suffixes
when giving QOM names. But that reduces clarity and if there are cases
out there where users want I and O with same name they can manually add
their own suffixes.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

various s390x updates:
- cpu state handling in qemu and migration
- vhost-scsi-ccw bugfix

# gpg: Signature made Fri 10 Oct 2014 14:01:34 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found

* remotes/cohuck/tags/s390x-20141010:
  s390x/virtio-ccw: fix vhost-scsi intialization
  s390x/migration: migrate CPU state
  s390x/kvm: synchronize the cpu state after SIGP (INITIAL) CPU RESET
  s390x/kvm: reuse kvm_s390_reset_vcpu() to get rid of ifdefs
  s390x/kvm: propagate s390 cpu state to kvm
  s390x/kvm: proper use of the cpu states OPERATING and STOPPED
  s390x/kvm: introduce proper states for s390 cpus
  linux-headers: update to 3.17-rc7
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As usual, SLES11's GCC complained about double typedefs:

/home/cohuck/git/qemu/kvm-all.c:110: error: redefinition of typedef ‘KVMState’
/home/cohuck/git/qemu/include/sysemu/kvm.h:161: error: previous declaration of ‘KVMState’ was here
Reported-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The vhost-scsi-ccw backend is of type VHostSCSICcw, not VirtIOSCSICcw.

This fixes a segfault when invoking

    qemu-system-s390x -device vhost-scsi-ccw,?
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch provides the cpu save information for dumps and later life
migration and enables migration of the CPU state. The code is based on
earlier work from Christian Borntraeger and Jason Herne.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
[provide cpu_post_load()]
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Jason J. Herne <jjherne@us.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[Cornelia Huck: tweaked cpu_post_load() comment]
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We need to synchronize registers after a reset has been performed. The
current code does that in qemu_system_reset(), load_normal_reset() and
modified_clear_reset() for all vcpus. After SIGP (INITIAL) CPU RESET,
this needs to be done for the targeted vcpu as well, so let's call
cpu_synchronize_post_reset() in the respective handlers.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch reuses kvm_s390_reset_vcpu() to get rid of some CONFIG_KVM and
CONFIG_USER_ONLY ifdefs in cpu.c.

In order to get rid of CONFIG_USER_ONLY, kvm_s390_reset_vcpu() has to provide a
dummy implementation - the two definitions are moved to the proper section in
cpu.h.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Let QEMU propagate the cpu state to kvm. If kvm doesn't yet support it, it is
silently ignored as kvm will still handle the cpu state itself in that case.

The state is not synced back, thus kvm won't have a chance to actively modify
the cpu state. To do so, control has to be given back to QEMU (which is already
done so in all relevant cases).

Setting of the cpu state can fail either because kvm doesn't support the
interface yet, or because the state is invalid/not supported. Failed attempts
will be traced
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch makes sure that halting a cpu and stopping a cpu are two different
things. Stopping a cpu will also set the cpu halted - this is needed for common
infrastructure to work (note that the stop and stopped flag cannot be used for
our purpose because they are already used by other mechanisms).

A cpu can be halted ("waiting") when it is operating. If interrupts are
disabled, this is called a "disabled wait", as it can't be woken up anymore. A
stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a
proper cpu state synchronization with the kvm part, we need to track the real
logical state of a cpu.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Until now, when a s390 cpu was stopped or halted, the number of running
CPUs was tracked in a global variable. This was problematic for migration,
so Jason came up with a per-cpu running state.
As it turns out, we want to track the full logical state of a target vcpu,
so we need real s390 cpu states.

This patch is based on an initial patch by Jason Herne, but was heavily
rewritten when adding the cpu states STOPPED and OPERATING. On the way we
move add_del_running to cpu.c (the declaration is already in cpu.h) and
modify the users where appropriate.

Please note that the cpu is still set to be stopped when it is
halted, which is wrong. This will be fixed in the next patch. The LOAD and
CHECK-STOP state will not be used in the first step.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
[folded Jason's patch into David's patch to avoid add/remove same lines]
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Sync headers with 3.17-rc7
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Four changes here.  Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.

# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (28 commits)
  qemu-char: Fix reconnect socket error reporting
  qemu-sockets: Add error to non-blocking connect handler
  qemu-error: Add error_vreport()
  virtio-scsi: fix use-after-free of VirtIOSCSIReq
  linuxboot: compute initrd loading address
  kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
  accel: Create accel object when initializing machine
  accel: Pass MachineState object to accel init functions
  accel: Rename 'init' method to 'init_machine'
  accel: Move accel init/allowed code to separate function
  accel: Remove tcg_available() function
  accel: Move qtest accel registration to qtest.c
  accel: Move Xen registration code to xen-common.c
  accel: Move KVM accel registration to kvm-all.c
  accel: Report unknown accelerator as "not found" instead of "does not exist"
  accel: Make AccelClass.available() optional
  accel: Use QOM classes for accel types
  accel: Move accel name lookup to separate function
  accel: Simplify configure_accelerator() using AccelType *acc variable
  accel: Create AccelType typedef
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If reconnect was set, errors wouldn't always be reported.
Fix that and also only report a connect error once until a
connection has been made.

The primary purpose of this is to tell the user that a
connection failed so they can know they need to figure out
what went wrong.  So we don't want to spew too much
out here, just enough so they know.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>