- 26 11月, 2018 2 次提交
-
-
由 Eric Auger 提交于
Add a new ARM SMMU section and set Eric Auger as the maintainer for ARM SMMU emulation sources. Signed-off-by: NEric Auger <eric.auger@redhat.com> Message-id: 20181122180143.14237-1-eric.auger@redhat.com Suggested-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Thomas Huth 提交于
I apparently missed some more files and even a complete machine (the "imx25-pdk") in my previous patch... but now we should hopefully have a completely coverage for all available ARM boards. Fixes: 95a5db3aSigned-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 1542782568-20059-1-git-send-email-thuth@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 23 11月, 2018 1 次提交
-
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
- 19 11月, 2018 3 次提交
-
-
由 Peter Maydell 提交于
In practice for most of the more-or-less orphan Arm board models, I will review patches and put them in via the target-arm tree. So list myself as an "Odd Fixes" status maintainer for them. This commit downgrades these boards to "Odd Fixes": * Allwinner-A10 * Exynos * Calxeda Highbank * Canon DIGIC * Musicpal * nSeries * Palm * PXA2xx These boards were already "Odd Fixes": * Gumstix * i.MX31 (kzm) Philippe Mathieu-Daudé has requested to be moved to R: status for Gumstix now that I am listed as the M: contact. Some boards are maintained, but their patches still go via the target-arm tree, so add myself as a secondary maintainer contact for those: * Xilinx Zynq * Xilinx ZynqMP * STM32F205 * Netduino 2 * SmartFusion2 * Mecraft M2S-FG484 * ASPEED BMCs * NRF51 Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Message-id: 20181108134139.31666-1-peter.maydell@linaro.org
-
由 Thomas Huth 提交于
Add entries for the boards "mcimx6ul-evk", "mcimx7d-sabre", "raspi2", "raspi3", "sabrelite", "vexpress-a15", "vexpress-a9" and "virt". While we're at it, also adjust the "i.MX31" section a little bit, so that the wildcards there do not match anymore for unrelated files (e.g. the new hw/misc/imx6ul_ccm.c file). Signed-off-by: NThomas Huth <thuth@redhat.com> Message-id: 1542184999-11145-1-git-send-email-thuth@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Cornelia Huck 提交于
The MAINTAINERS file is a bit sparse on information about what the different designators are. Let's add some more information to give contributors a better idea about what the different roles are. Signed-off-by: NCornelia Huck <cohuck@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-id: 20181026105711.29605-1-cohuck@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 18 11月, 2018 1 次提交
-
-
由 Aleksandar Markovic 提交于
Add Stefan Markovic as a MIPS reviewer. He had several key contributions to QEMU for MIPS this year. He is a meticulous person with the ability to think and act on many levels. Reviewed-by: NStefan Markovic <smarkovic@wavecomp.com> Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com>
-
- 13 11月, 2018 1 次提交
-
-
由 Thomas Huth 提交于
There is no active maintainer, but since Peter is picking up patches via qemu-arm@nongnu.org, I think we could at least use "Odd Fixes" as status here. Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 1541528230-31817-1-git-send-email-thuth@redhat.com [PMM: Also add myself as an M: contact] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 12 11月, 2018 2 次提交
-
-
由 Stefan Hajnoczi 提交于
When you clone the repository without previous commit history, 'git://' doesn't protect from man-in-the-middle attacks. HTTPS is more secure since the client verifies the server certificate. Suggested-by: NEric Blake <eblake@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181108111531.30671-6-stefanha@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
git://由 Stefan Hajnoczi 提交于
When you clone the repository without previous commit history, 'git://' doesn't protect from man-in-the-middle attacks. HTTPS is more secure since the client verifies the server certificate. Reported-by: NJann Horn <jannh@google.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Acked-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181108111531.30671-4-stefanha@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 08 11月, 2018 1 次提交
-
-
由 Alexander Graf 提交于
I haven't really been maintaining any PowerPC code for quite a while now, so let's reflect reality: David does all the work and embedded PPC is in "Odd Fixes" state rather than supported now. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 07 11月, 2018 1 次提交
-
-
由 Paolo Bonzini 提交于
Other people are doing a much better work than myself at handling some subsystems. For those files it is better if I downgrade myself to reviewer or recognize that I am not actually doing any work there. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Laurent Vivier <lvivier@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 06 11月, 2018 2 次提交
-
-
由 Laszlo Ersek 提交于
The "tests/acpi-test-data" files are currently not covered by any section in MAINTAINERS, and "scripts/checkpatch.pl" complains when new data files are added. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Peter Maydell 提交于
Currently tests/hex-loader-check-data contains data files used by the hexloader-test, and configure individually symlinks those data files into the build directory using a wildcard. Using a wildcard like this is a bad idea, because if a new data file is added, nothing causes configure to be rerun, and so no symlink is added for the new file. This can cause tests to spuriously fail when they can't find their data. Instead, it's better to symlink an entire directory of data files. We already have such a directory: tests/data. Move the data files from tests/hex-loader-check-data/ to tests/data/hex-loader/, and remove the unnecessary symlinking. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 05 11月, 2018 5 次提交
-
-
由 Christian Borntraeger 提交于
The s390-ccw bios and the ipl code do work in lock-step. Let us merge them in the maintainer file. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1540827745-20795-5-git-send-email-borntraeger@de.ibm.com> Acked-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Alexander Graf 提交于
I haven't realistically maintained s390 related parts for quite a while now, so let's remove my name from the MAINTAINERS file to reflect reality. Signed-off-by: NAlexander Graf <agraf@suse.de> Message-Id: <20181030093715.18793-1-agraf@suse.de> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Christian Borntraeger 提交于
Collin will take over the maintainership from Yi Min. Let us add a separate s390 pci section. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1540827745-20795-4-git-send-email-borntraeger@de.ibm.com> Acked-by: NCollin Walling <walling@linux.ibm.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Christian Borntraeger 提交于
Halil does all the work anyway. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1540827745-20795-3-git-send-email-borntraeger@de.ibm.com> Acked-by: NHalil Pasic <pasic@linux.ibm.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Christian Borntraeger 提交于
Eric and Farhan will help with maintaining vfio-ccw. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1540827745-20795-2-git-send-email-borntraeger@de.ibm.com> Acked-by: NEric Farman <farman@linux.ibm.com> Acked-by: NFarhan Ali <alifm@linux.ibm.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
- 02 11月, 2018 1 次提交
-
-
由 Philippe Mathieu-Daudé 提交于
Shannon Zhao's email at Huawei is bouncing: remove it. X-Failed-Recipients: zhaoshenglong@huawei.com ** Address not found ** Your message wasn't delivered to zhaoshenglong@huawei.com because the address couldn't be found, or is unable to receive mail. Note that the section still contains his personal email (see e59f13d7). Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Acked-by: NShannon Zhao <shannon.zhaosl@gmail.com> Message-id: 20181029195931.8747-1-philmd@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 31 10月, 2018 4 次提交
-
-
由 Daniel P. Berrangé 提交于
The sheepdog mailing list is setup to stop and queue messages from non-subscribers, pending moderator approval. Unfortunately it seems that the moderation queue is not actively deadlt with. Even when messages are approved, the sender is never added to the whitelist, so every future mail the same sender continues to get stopped for moderation. MAINTAINERS entries should be responsive and not uneccessarily block mails from QEMU contributors, so drop the sheepdog mailing list. Reviewed-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Stefan Berger 提交于
My old email address will soon not work anymore, so change it to the new domain. Signed-off-by: NStefan Berger <stefanb@linux.ibm.com>
-
由 Palmer Dabbelt 提交于
We now have a RISC-V specific QEMU development list. Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
由 Palmer Dabbelt 提交于
Alistair has been contributing to the RISC-V QEMU port for a while now so I'd like him to be officially listed as a maintainer. I've checked with the other RISC-V maintainers and there are no objections, and I've also checked with Alistair so he knows I'm volunteering him. Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
- 26 10月, 2018 1 次提交
-
-
由 Aleksandar Markovic 提交于
Add disassembler support for nanoMIPS. Reviewed-by: NStefan Markovic <smarkovic@wavecomp.com> Signed-off-by: NMatthew Fortune <matthew.fortune@mips.com> Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com>
-
- 17 10月, 2018 1 次提交
-
-
由 Liu Yuan 提交于
E-mail to one of block/sheepdog maintainers Mitake Hitoshi bounces <mitake.hitoshi@lab.ntt.co.jp>: unknown user: "mitake.hitoshi" and no current address is known. So just remove it. Signed-off-by: NLiu Yuan <liuyuan1@cmiot.chinamobile.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NThomas Huth <thuth@redhat.com>
-
- 12 10月, 2018 3 次提交
-
-
由 Tony Krowiak 提交于
This patch provides documentation describing the AP architecture and design concepts behind the virtualization of AP devices. It also includes an example of how to configure AP devices for exclusive use of KVM guests. Signed-off-by: NTony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: NPierre Morel <pmorel@linux.ibm.com> Tested-by: NPierre Morel <pmorel@linux.ibm.com> Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20181010170309.12045-7-akrowiak@linux.ibm.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Tony Krowiak 提交于
Introduces a VFIO based AP device. The device is defined via the QEMU command line by specifying: -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device> There may be only one vfio-ap device configured for a guest. The mediated matrix device is created by the VFIO AP device driver by writing a UUID to a sysfs attribute file (see docs/vfio-ap.txt). The mediated matrix device will be named after the UUID. Symbolic links to the $uuid are created in many places, so the path to the mediated matrix device $uuid can be specified in any of the following ways: /sys/devices/vfio_ap/matrix/$uuid /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid /sys/bus/mdev/devices/$uuid /sys/bus/mdev/drivers/vfio_mdev/$uuid When the vfio-ap device is realized, it acquires and opens the VFIO iommu group to which the mediated matrix device is bound. This causes a VFIO group notification event to be signaled. The vfio_ap device driver's group notification handler will get called at which time the device driver will configure the the AP devices to which the guest will be granted access. Signed-off-by: NTony Krowiak <akrowiak@linux.ibm.com> Tested-by: NPierre Morel <pmorel@linux.ibm.com> Acked-by: NHalil Pasic <pasic@linux.ibm.com> Tested-by: NPierre Morel <pmorel@linux.ibm.com> Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20181010170309.12045-6-akrowiak@linux.ibm.com> Reviewed-by: NThomas Huth <thuth@redhat.com> [CH: added missing g_free and device category] Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Tony Krowiak 提交于
Introduces the base object model for virtualizing AP devices. Signed-off-by: NTony Krowiak <akrowiak@linux.ibm.com> Tested-by: NPierre Morel <pmorel@linux.ibm.com> Acked-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NHalil Pasic <pasic@linux.ibm.com> Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20181010170309.12045-5-akrowiak@linux.ibm.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
- 03 10月, 2018 1 次提交
-
-
由 Viktor Prutyanov 提交于
Add myself as contrib/elf2dmp maintainer and elf2dmp as maintained. Signed-off-by: NViktor Prutyanov <viktor.prutyanov@phystech.edu> Message-Id: <20180918095422.4468-1-viktor.prutyanov@phystech.edu> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 27 9月, 2018 1 次提交
-
-
由 Gerd Hoffmann 提交于
EDID is a metadata format to describe monitors. On physical hardware the monitor has an eeprom with that data block which can be read over i2c bus. On a linux system you can usually find the EDID data block in /sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility which you can use to turn the blob into readable form. I think it would be a good idea to use EDID for virtual displays too. Needs changes in both qemu and guest kms drivers. This patch is the first step, it adds an generator for EDID blobs to qemu. Comes with a qemu-edid test tool included. With EDID we can pass more information to the guest. Names and serial numbers, so the guests display configuration has no boring "Unknown Monitor". List of video modes. Display resolution, pretty important in case we want add HiDPI support some day. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Message-id: 20180925075646.25114-2-kraxel@redhat.com
-
- 25 9月, 2018 1 次提交
-
-
由 Joel Stanley 提交于
This contains the NRF51, and the machine that uses it, the BBC micro:bit. Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NJoel Stanley <joel@jms.id.au> Message-id: 20180831220920.27113-2-joel@jms.id.au Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 24 9月, 2018 1 次提交
-
-
由 Markus Armbruster 提交于
Commit ba51ef25 moved hw/dma/sun4m_iommu.c to hw/sparc/sun4m_iommu.c without updating MAINTAINERS. Commit f5980f75 deleted include/hw/sparc/sun4m.h without updating MAINTAINERS. Commit 0bcc8e5b fat-fingered tests/check-block-qdict.c. Commit 33e9e9bd fat-fingered include/qemu/job.h. Commit eb815e24 moved qapi-schema.json to qapi/ without updating MAINTAINERS. Commit 2e3c8f8d converted docs/devel/migration.txt to docs/devel/migration.rst without updating MAINTAINERS. Offenders tracked down with the following shell loop: shopt -s nullglob for i in `sed -n 's/^F: //p' <MAINTAINERS ` do glob="`echo $i`" if [ "$glob" = "$i" ] then [ ! -e $i ] else [ -z "$glob" ] fi && echo "$i" done Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20180810115553.32604-1-armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com>
-
- 28 8月, 2018 3 次提交
-
-
由 Thomas Huth 提交于
The code should only be enabled if CONFIG_VHOST_VSOCK has been set. This can be done best if the code resides in a separate file. Signed-off-by: NThomas Huth <thuth@redhat.com> Message-Id: <1532521224-27235-9-git-send-email-thuth@redhat.com> [CH: updated MAINTAINERS] Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Thomas Huth 提交于
The code should only be enabled if CONFIG_VIRTIO_SERIAL has been set. This can be done best if the code resides in a separate file. Signed-off-by: NThomas Huth <thuth@redhat.com> Message-Id: <1532521224-27235-3-git-send-email-thuth@redhat.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Pavel Zbitskiy 提交于
Copied from alpha. Signed-off-by: NPavel Zbitskiy <pavel.zbitskiy@gmail.com> Message-Id: <20180821025104.19604-2-pavel.zbitskiy@gmail.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
- 27 8月, 2018 1 次提交
-
-
由 Marc-André Lureau 提交于
vhost-user-gpu will share the same code to open a DRM node. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180713130916.4153-20-marcandre.lureau@redhat.com> [ kraxel: buildfix: util/drm.o must be CONFIG_OPENGL not CONFIG_LINUX ] Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 25 8月, 2018 1 次提交
-
-
由 Markus Armbruster 提交于
qmp-test is for QMP protocol tests. Commit e4a426e7 added generic, basic tests of query commands to it. Move them to their own test program qmp-cmd-test, to keep qmp-test focused on the protocol. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-6-armbru@redhat.com>
-
- 24 8月, 2018 2 次提交
-
-
由 Peter Maydell 提交于
Create a new include file for the pl022's device struct, type macros, etc, so that it can be instantiated using the "embedded struct" coding style. While we're adding the new file to MAINTAINERS, add also the .c file, which was missing an entry. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180820141116.9118-16-peter.maydell@linaro.org Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Peter Maydell 提交于
Implement a model of the TrustZone Master Securtiy Controller, as documented in the Arm CoreLink SIE-200 System IP for Embedded TRM (DDI0571G): https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g The MSC is intended to sit in front of a device which can be a bus master (eg a DMA controller) and programmably gate its transactions. This allows a bus-mastering device to be controlled by non-secure code but still restricted from making accesses to addresses which are secure-only. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 20180820141116.9118-12-peter.maydell@linaro.org Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
-