This is the first step in pushing down acquire/release, and will let
rfifolock drop the contention callback feature.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424449612-18215-3-git-send-email-pbonzini@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

By using thread-local storage, aio_poll can stop using global data during
g_poll_ns.  This will make it possible to drop callbacks from rfifolock.

[Moved npfd = 0 assignment to end of walking_handlers region as
suggested by Paolo.  This resolves the assert(npfd == 0) assertion
failure in pollfds_cleanup().
--Stefan]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424449612-18215-2-git-send-email-pbonzini@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently, throttle timers won't make any progress when VCPU is not
running, which would stall the request queue in utils, qtest, vm
suspending, and live migration, without special handling.

Block jobs are confusingly inconsistent between with and without
throttling: if user sets a bps limit, stops the vm, then start a block
job, the block job will not make any progress; in contrary, if user
unsets the bps limit, or if it's not set, the block job will run
normally.

After this patch, with the host clock, even if the VCPUs are stopped,
the throttle queues will be processed.

This patch also enables potential to add throttle to bdrv_drain_all.
Currently all requests are drained immediately. In other words whenever
it is called, IO throttling goes ineffective (examples: system reset,
migration and many block job operations.). This is a loophole that guest
could exploit. If we use the host clock, we can later just trust the
nested poll. This could be done on top.

Note that for qemu-iotests case 093, which uses qtest, we still keep vm
clock so the script can control the clock stepping in order to be
deterministic.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1427268446-6426-1-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The ffs(3) family of functions is not portable.  MinGW doesn't always
provide the function.

Use ctz32() or ctz64() instead.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-10-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The lack of ffs(3) in the MinGW headers is a hint that we shouldn't rely
on it.  MinGW 4.9.2 does not make it available for linking when QEMU's
./configure --enable-debug is used (release builds are fine though).

Now that all QEMU code has been switched to ctz32() there is no need for
ffs(3).
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-9-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Rewrite the loop using level &= level - 1 to clear the least significant
bit after each iteration.  This simplifies the loop and makes it easy to
replace ffs(3) with ctz32().

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-8-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

ffs() cannot be replaced with ctz32() when the argument might be zero,
because ffs(0) returns 0 while ctz32(0) returns 32.

The ffs(3) call in sd_normal_command() is a special case though.  It can
be converted to ctz32() + 1 because the argument is never zero:

  if (!(req.arg >> 8) || (req.arg >> (ctz32(req.arg & ~0xff) + 1))) {
      ~~~~~~~~~~~~~~~
            ^--------------- req.arg cannot be zero

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-7-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There are a number of ffs(3) callers that do roughly:

  bit = ffs(val);
  if (bit) {
      do_something(bit - 1);
  }

This pattern can be converted to ctz32() like this:

  zeroes = ctz32(val);
  if (zeroes != 32) {
      do_something(zeroes);
  }
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-6-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This commit was generated mechanically by coccinelle from the following
semantic patch:

@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)

The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc).  Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It is not clear from the code how a 0 parameter should be handled by the
hardware.  Keep the same behavior as ffs(0) - 1 == -1.

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-4-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It is not clear from the code how a 0 parameter should be handled by the
hardware.  Keep the same behavior as ffs(0) - 1 == -1.

Cc: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-3-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The binary search in sdp_uuid_match() only works when the number of
elements to search is a power of two.

  lo = record->uuid;
  hi = record->uuids;
  while (hi >>= 1)
      if (lo[hi] <= val)
          lo += hi;

  return *lo == val;

I noticed that the record->uuids calculation in
sdp_service_record_build() was suspect:

  record->uuids = 1 << ffs(record->uuids - 1);

Unlike most ffs(val) - 1 users, the expression is ffs(val - 1)!

Actually ffs() is the wrong function to use for power-of-2.  Use
pow2ceil() to achieve the correct effect.  Now the record->uuid[] array
is sized correctly and the binary search in sdp_uuid_match() should
work.

I'm not sure how to run/test this code.

Cc: Andrzej Zaborowski <balrog@zabor.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-2-git-send-email-stefanha@redhat.com
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NAlberto Garcia <berto@igalia.com>
Message-id: 1426522925-14444-1-git-send-email-berto@igalia.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The command "virsh create" will fail in such condition: vm has two
disks: vda and vdb. vda has snapshot s1 with id "1", vdb doesn't have
s1 but has snapshot s2 with id "1".  When we want to run command "virsh
create s1", del_existing_snapshots() only deletes s1 in vda, and
bdrv_snapshot_create() tries to create vdb's snapshot s1 with id "1",
but id "1" alreay exists in vdb with name "s2"!

The simplest way is call find_new_snapshot_id() unconditionally.
Signed-off-by: NYi Wang <up2wing@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

X86 queue, 2015-04-27 (v2)

# gpg: Signature made Mon Apr 27 19:42:39 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: Remove AMD feature flag aliases from CPU model table
  target-i386: X86CPU::xlevel2 QOM property
  target-i386: Make "level" and "xlevel" properties static
  qemu-config: Accept empty option values
  MAINTAINERS: Change status of X86 to Maintained
  MAINTAINERS: Add myself to X86
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

NUMA queue, 2015-04-27

# gpg: Signature made Mon Apr 27 19:02:19 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/numa-pull-request:
  MAINTAINERS: Add myself as NUMA code maintainer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * memory system updates to support transaction attributes
 * set user-mode and secure attributes for accesses made by ARM CPUs
 * rename c1_coproc to cpacr_el1
 * adjust id_aa64pfr0 when has_el3 CPU property disabled
 * allow ARMv8 SCR.SMD updates

# gpg: Signature made Mon Apr 27 16:14:30 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20150427:
  Allow ARMv8 SCR.SMD updates
  target-arm: Adjust id_aa64pfr0 when has_el3 CPU property disabled
  target-arm: rename c1_coproc to cpacr_el1
  target-arm: Check watchpoints against CPU security state
  target-arm: Use attribute info to handle user-only watchpoints
  target-arm: Add user-mode transaction attribute
  target-arm: Use correct memory attributes for page table walks
  target-arm: Honour NS bits in page tables
  Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
  exec.c: Capture the memory attributes for a watchpoint hit
  exec.c: Add new address_space_ld*/st* functions
  exec.c: Make address_space_rw take transaction attributes
  exec.c: Convert subpage memory ops to _with_attrs
  Add MemTxAttrs to the IOTLB
  Make CPU iotlb a structure rather than a plain hwaddr
  memory: Replace io_mem_read/write with memory_region_dispatch_read/write
  memory: Define API for MemoryRegionOps to take attrs and return status
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

spice: misc fixes.

# gpg: Signature made Mon Apr 27 12:03:16 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-20150427-1:
  spice: learn to hide cursor
  spice: set pointer position on hotspot
  spice: fix mouse cursor position
  spice: fix simple display on bigendian hosts
  monitor: Make client_migrate_info synchronous
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When CPU vendor is AMD, the AMD feature alias bits on
CPUID[0x80000001].EDX are already automatically copied from CPUID[1].EDX
on x86_cpu_realizefn(). When CPU vendor is Intel, those bits are
reserved and should be zero. On either case, those bits shouldn't be set
in the CPU model table.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

We already have "level" and "xlevel", only "xlevel2" is missing.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Static properties require only 1 line of code, much simpler than the
existing code that requires writing new getters/setters.

As a nice side-effect, this fixes an existing bug where the setters were
incorrectly allowing the properties to be changed after the CPU was
already realized.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Currently it is impossible to set an option in a config file to an empty
string, because the parser matches only lines containing non-empty
strings between double-quotes.

As sscanf() "[" conversion specifier only matches non-empty strings, add
a special case for empty strings.
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

"Odd Fixes" doesn't reflect the current status of target-i386. We have
people looking after it, now.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

gtk: support text consoles without vte, bugfixes.

# gpg: Signature made Mon Apr 27 14:34:15 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-gtk-20150427-1:
  gtk: Avoid accel key leakage into guest on console switch
  gtk: Fix VTE focus grabbing
  console/gtk: add qemu_console_get_label
  gtk: bind to text terminal consoles too
  gtk: handle switch_surface(NULL) properly
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The "srat" and "numa" keywords will help get_maintainer.pl catch
NUMA-related code in other files too.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Four little fixes

# gpg: Signature made Fri Apr 24 19:56:51 2015 BST using RSA key ID E24ED5A7
# gpg: Good signature from "Luiz Capitulino <lcapitulino@gmail.com>"

* remotes/qmp-unstable/tags/for-upstream:
  qmp: Give saner messages related to qmp_capabilities misuse
  qmp-commands: fix incorrect uses of ":O" specifier
  qapi: Drop dead genlist parameter
  balloon: improve error msg when adding second device
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The Spice protocol uses cursor position on hotspot: the client is
applying hotspot offset when drawing the cursor.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Denis Kirjanov is busy getting spice run on ppc64 and trapped into this
one.  Spice wire format is little endian, so we have to explicitly say
we want little endian when letting pixman convert the data for us.
Reported-by: NDenis Kirjanov <kirjanov@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Live migration with spice works like this today:

  (1) client_migrate_info monitor cmd
  (2) spice server notifies client, client connects to target host.
  (3) qemu waits until spice client connect is finished.
  (4) send over vmstate (i.e. main part of live migration).
  (5) spice handover to target host.

(3) is implemented by making client_migrate_info a async monitor
command.  This is the only async monitor command we have.

The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel.  That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.

Time to drop step (3).  This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

GTK2 sends the accel key to the guest when switching to the graphic
console via that shortcut. Resolve this by ignoring any keys until the
next key-release event. However, do not ignore keys when switching via
the menu or when on GTK3.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

At least on GTK2, the VTE terminal has to be specified as target of
gtk_widget_grab_focus. Otherwise, switching from one VTE terminal to
another causes the focus to get lost.

CC: John Snow <jsnow@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

[ kraxel: fixed build with CONFIG_VTE=n ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Updated scr_write to always allow updates to the SCR.SMD bit on ARMv8
regardless of whether virtualization (EL2) is enabled or not.
Signed-off-by: NGreg Bellows <greg.bellows@linaro.org>
Message-id: 1429888797-4378-1-git-send-email-greg.bellows@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1429669112-29835-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rename the field holding CPACR_EL1 system register state in AArch64
naming style.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
[PMM: also fixed a couple of missed occurrences in cpu.c]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix a TODO in bp_wp_matches() now that we have a function for
testing whether the CPU is currently in Secure mode or not.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Now that we have memory access attribute information in the watchpoint
checking code, we can correctly implement handling of watchpoints
which should match only on userspace accesses, where LDRT/STRT/LDT/STT
from EL1 are treated as userspace accesses.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>