Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 05 4月, 2013 2 次提交
    • L
      hmp: human-monitor-command: stop using the Memory chardev driver · 48c043d0
      由 Luiz Capitulino 提交于 
      The Memory chardev driver was added because, as the Monitor's output
buffer was static, we needed a way to accumulate the output of an
HMP commmand when ran by human-monitor-command.

However, the Monitor's output buffer is now dynamic, so it's possible
for the human-monitor-command to use it instead of the Memory chardev
driver.

This commit does that change, but there are two important
observations about it:

 1. We need a way to signal to the Monitor that it shouldn't call
    chardev functions when flushing its output. This is done
    by adding a new flag to the Monitor object called skip_flush
	(which is set to true by qmp_human_monitor_command())

 2. The current code has buffered semantics: QMP clients will
    only see a command's output if it flushes its output with
	a new-line character. This commit changes this to unbuffered,
	which means that QMP clients will see a command's output
	whenever the command prints anything.

	I don't think this will matter in practice though, as I believe
	all HMP commands print the new-line character anyway.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
      48c043d0
    • L
      Monitor: Make output buffer dynamic · e1f2641b
      由 Luiz Capitulino 提交于 
      Commit f628926b changed monitor_flush()
to retry on qemu_chr_fe_write() errors. However, the Monitor's output
buffer can keep growing while the retry is not issued and this can
cause the buffer to overflow.

To reproduce this issue, just start qemu and type on the Monitor:

(qemu) ?

This will cause an assertion to trig.

To fix this problem this commit makes the Monitor buffer dynamic,
which means that it can grow as much as needed.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
      e1f2641b
  3. 28 3月, 2013 1 次提交
  5. 26 3月, 2013 1 次提交
  7. 22 3月, 2013 2 次提交
  9. 19 3月, 2013 1 次提交
  11. 17 3月, 2013 1 次提交
  13. 13 3月, 2013 1 次提交
    • S
      Support for TPM command line options · d1a0cf73
      由 Stefan Berger 提交于 
      This patch adds support for TPM command line options.
The command line options supported here are

./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
           -device tpm-tis,tpmdev=<id>,id=<other id>

and

./qemu-... -tpmdev help

where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').

Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.

Monitor support for 'info tpm' has been added. It for example prints the
following:

(qemu) info tpm
TPM devices:
 tpm0: model=tpm-tis
  \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
      d1a0cf73
  15. 12 3月, 2013 1 次提交
  17. 01 3月, 2013 1 次提交
  19. 24 2月, 2013 1 次提交
    • P
      Replace all setjmp()/longjmp() with sigsetjmp()/siglongjmp() · 6ab7e546
      由 Peter Maydell 提交于 
      The setjmp() function doesn't specify whether signal masks are saved and
restored; on Linux they are not, but on BSD (including MacOSX) they are.
We want to have consistent behaviour across platforms, so we should
always use "don't save/restore signal mask" (this is also generally
going to be faster). This also works around a bug in MacOSX where the
signal-restoration on longjmp() affects the signal mask for a completely
different thread, not just the mask for the thread which did the longjmp.
The most visible effect of this was that ctrl-C was ignored on MacOSX
because the CPU thread did a longjmp which resulted in its signal mask
being applied to every thread, so that all threads had SIGINT and SIGTERM
blocked.

The POSIX-sanctioned portable way to do a jump without affecting signal
masks is to siglongjmp() to a sigjmp_buf which was created by calling
sigsetjmp() with a zero savemask parameter, so change all uses of
setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0)
to save the signal mask; however the following siglongjmp() must not
restore the signal mask, so the pair can be effectively considered as
"sigjmp/longjmp which don't touch the mask".]

For Windows we provide a trivial sigsetjmp/siglongjmp in terms of
setjmp/longjmp -- this is OK because no user will ever pass a non-zero
savemask.

The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c
are left untouched because these are self-contained singlethreaded
test programs intended to be run under QEMU's Linux emulation, so they
have neither the portability nor the multithreading issues to deal with.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Tested-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
      6ab7e546
  21. 16 2月, 2013 4 次提交
  23. 17 1月, 2013 5 次提交
  25. 15 1月, 2013 2 次提交
  27. 13 1月, 2013 1 次提交
  29. 11 1月, 2013 1 次提交
  31. 19 12月, 2012 10 次提交
  33. 17 12月, 2012 1 次提交
  35. 31 10月, 2012 1 次提交
  37. 24 10月, 2012 3 次提交