http://msdn.microsoft.com/en-us/library/windows/hardware/ff541625%28v=vs.85%29.aspx

This code is generic for activating reference time counter or virtual reference time stamp counter
Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The MS docs specify HV_X64_MSR_HYPERCALL as a mandatory interface,
thus we must provide the MSRs even if the user only specified
features that, like relaxed timing, in principle don't require them.
And the MSRs are only there if the hypervisor has KVM_CAP_HYPERV.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_arch_init_vcpu's initialization of the KVM leaves at 0x40000100
is broken, because KVM_CPUID_FEATURES is left at 0x40000001.  Move
it to 0x40000101 if Hyper-V is enabled.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM introduced internal error exit reason and suberror at the same time,
and later extended it with internal error data.
QEMU does not report suberror on hosts between these two events because
we check for the extension. (half a year in 2009, but it is misleading)

Fix by removing KVM_CAP_INTERNAL_ERROR_DATA condition on printf.

(partially improved by bb44e0d1 and ba4047cf in the past)
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We don't need the ft[] array on kvm_check_features_against_host()
anymore, as we can simply use the feature_word_info[] array, that has
everything we need.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that the kvm_cpu_fill_host() code is simplified, we can simply set
the feature word array using a simple loop.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reorder the code so all the code that sets x86_cpu_def->features is at
the end of the function.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There's no need to check CPU xlevel2 before calling
kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX), because:

 * The kernel won't return any entry for 0xC0000000 if host CPU vendor
   is not Centaur (See kvm_dev_ioctl_get_supported_cpuid() on the kernel
   code)
 * Similarly, the kernel won't return any entry for 0xC0000001 if
   CPUID[0xC0000000].EAX is < 0xC0000001
 * kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
   by the kernel for the requested leaf

For similar reasons, we can simply set x86_cpu_def->xlevel2 directly
instead of making it conditional, because it will be set to 0 CPU vendor
is not Centaur.

This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
[Remove unparseable comment. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There's no need to check CPU vendor before calling
kvm_arch_get_supported_cpuid(s, 0xC0000000, 0, R_EAX), because:

 * The kernel won't return any entry for 0xC0000000 if host CPU vendor
   is not Centaur (See kvm_dev_ioctl_get_cpuid() on the kernel code);
 * kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
   by the kernel for the requested leaf.

This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There's no need to check level (CPUID[0].EAX) before calling
kvm_arch_get_supported_cpuid(s, 0x7, 0, R_EBX), because:

 * The kernel won't return any entry for CPUID 7 if CPUID[0].EAX is < 7
   on the host (See kvm_dev_ioctl_get_cpuid() on the kernel code);
 * kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
   by the kernel for the requested leaf.

This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Those host_cpuid() calls are useless. They are leftovers from when the
old code using host_cpuid() was removed.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

* qemu-kvm/uq/master:
  kvm: always update the MPX model specific register
  KVM: fix addr type for KVM_IOEVENTFD
  KVM: Retry KVM_CREATE_VM on EINTR
  mempath prefault: fix off-by-one error
  kvm: x86: Separately write feature control MSR on reset
  roms: Flush icache when writing roms to guest memory
  target-i386: clear guest TSC on reset
  target-i386: do not special case TSC writeback
  target-i386: Intel MPX

Conflicts:
	exec.c

aliguori: fix trivial merge conflict in exec.c
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

* otubo/seccomp:
  seccomp: add some basic shared memory syscalls to the whitelist
  seccomp: add mkdir() and fchmod() to the whitelist

Message-id: 1390231004-18392-1-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Initial patch for QEMU GTK support on Windows

# gpg: Signature made Mon 20 Jan 2014 11:37:58 AM PST using RSA key ID FAD62069
# gpg: Can't check signature: public key not found

* sweil/tags/for_anthony:
  gtk: Support keyboard translation for hosts running Windows

Message-id: 1390246909-18757-1-git-send-email-sw@weilnetz.de
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

hda-codec: disable streams on reset

# gpg: Signature made Tue 21 Jan 2014 02:17:12 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* kraxel/tags/pull-audio-2:
  hda-codec: disable streams on reset

Message-id: 1390299589-5082-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

usb core+hid: add support for microsoft os descriptors

# gpg: Signature made Tue 21 Jan 2014 02:21:29 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* kraxel/tags/pull-usb-2:
  usb-hid: add microsoft os descriptor support
  usb: add support for microsoft os descriptors

Message-id: 1390299772-5368-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

* bonzini/scsi-next:
  scsi: Support TEST UNIT READY in the dummy LUN0
  block: add .bdrv_reopen_prepare() stub for iscsi
  virtio-scsi: Prevent assertion on missed events
  virtio-scsi: Cleanup of I/Os that never started
  scsi: Assign cancel_io vector for scsi_disk_emulate_ops

Conflicts:
	block/iscsi.c

aliguori: resolve trivial merge conflict in block/iscsi.c
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Block patches

# gpg: Signature made Fri 24 Jan 2014 08:40:53 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found

* kwolf/tags/for-anthony: (93 commits)
  block: Switch bdrv_io_limits_intercept() to byte granularity
  qemu-iotests: Test pwritev RMW logic
  qemu-io: New command 'sleep'
  blkdebug: Make required alignment configurable
  iscsi: Set bs->request_alignment
  block: Make bdrv_pwrite() a bdrv_prwv_co() wrapper
  block: Make bdrv_pread() a bdrv_prwv_co() wrapper
  block: Change coroutine wrapper to byte granularity
  block: Assert serialisation assumptions in pwritev
  block: Align requests in bdrv_co_do_pwritev()
  block: Allow wait_serialising_requests() at any point
  block: Make overlap range for serialisation dynamic
  block: Generalise and optimise COR serialisation
  block: Make zero-after-EOF work with larger alignment
  block: Allow waiting for overlapping requests between begin/end
  block: Switch BdrvTrackedRequest to byte granularity
  block: Introduce bdrv_co_do_pwritev()
  block: write: Handle COR dependency after I/O throttling
  block: Introduce bdrv_aligned_pwritev()
  block: Introduce bdrv_co_do_preadv()
  ...

Message-id: 1390584136-24703-1-git-send-email-kwolf@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Request sizes used to be rounded down to the next sector boundary,
allowing to bypass the I/O limit. Now all requests are accounted for
with their exact byte size.
Reported-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

There is no easy way to check that a request correctly waits for a
different request. With a sleep command we can at least approximate it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The new 'align' option of blkdebug can be used in order to emulate
backends with a required 4k alignment on hosts which only really require
512 byte alignment.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The iSCSI backend already gets the block size from the READ CAPACITY
command it sends.  Save it so that the generic block layer gets it
too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_pwritev().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_preadv().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

If a request calls wait_serialising_requests() and actually has to wait
in this function (i.e. a coroutine yield), other requests can run and
previously read data (like the head or tail buffer) could become
outdated. In this case, we would have to restart from the beginning to
read in the updated data.

However, we're lucky and don't actually need to do that: A request can
only wait in the first call of wait_serialising_requests() because we
mark it as serialising before that call, so any later requests would
wait. So as we don't wait in practice, we don't have to reload the data.

This is an important assumption that may not be broken or data
corruption will happen. Document it with some assertions.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

This patch changes bdrv_co_do_pwritev() to actually be what its name
promises. If requests aren't properly aligned, it performs a RMW.

Requests touching the same block are serialised against the RMW request.
Further optimisation of this is possible by differentiating types of
requests (concurrent reads should actually be okay here).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

We can only have a single wait_serialising_requests() call per request
because otherwise we can run into deadlocks where requests are waiting
for each other. The same is true when wait_serialising_requests() is not
at the very beginning of a request, so that other requests can be issued
between the start of the tracking and wait_serialising_requests().

Fix this by changing wait_serialising_requests() to ignore requests that
are already (directly or indirectly) waiting for the calling request.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Copy on Read wants to serialise with all requests touching the same
cluster, so wait_serialising_requests() rounded to cluster boundaries.
Other users like alignment RMW will have different requirements, though
(requests touching the same sector), so make it dynamic.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Change the API so that specific requests can be marked serialising. Only
these requests are checked for overlaps then.

This means that during a Copy on Read operation, not all requests
overlapping other requests are serialised any more, but only those that
actually overlap with the specific COR request.

Also remove COR from function and variable names because this
functionality can be useful in other contexts.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Odd file sizes could make bdrv_aligned_preadv() shorten the request in
non-aligned ways. Fix it by rounding to the required alignment instead
of 512 bytes.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Previously, it was not possible to use wait_for_overlapping_requests()
between tracked_request_begin()/end() because it would wait for itself.

Ignore the current request in the overlap check and run more of the
bdrv_co_do_preadv/pwritev code with a BdrvTrackedRequest present.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

This is going to become the bdrv_co_do_preadv() equivalent for writes.
In this patch, however, just a function taking byte offsets is created,
it doesn't align anything yet.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

First waiting for all COR requests to complete and calling the
throttling function afterwards means that the request could be delayed
and we still need to wait for the COR request even if it was issued only
after the throttled write request.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

This separates the part of bdrv_co_do_writev() that needs to happen
before the request is modified to match the backend alignment, and a
part that needs to be executed afterwards and passes the request to the
BlockDriver.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Similar to bdrv_pread(), which aligns byte-aligned request to 512 byte
sectors, bdrv_co_do_preadv() takes a byte-aligned request and aligns it
to the alignment specified in bs->request_alignment.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>