Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This reverts commit 9c998424 as even when
it was applied, all supposedly new config options were already enabled.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Bonus fix: always set an error on failure.  Some failures were silent
before, except for the generic error set by device_realize().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This is in preparation for using VMSTATE_BITMAP in a followup vmstate
migration patch.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Issuing loadvm under -M mac99 would fail for two reasons: firstly an incorrect
version number for openpic would cause openpic_load() to abort, and secondly
a cut/paste error when restoring the IVPR and IDR registers caused subsequent
vmstate sections to become misaligned and abort early.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

A simple copy/paste error causes savevm on -M mac99 to segfault.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since env->msr has already been restored by the time cpu_post_load is called,
make sure that ppc_store_msr() is explicitly called with all msr bits except
MSR_TGPR marked as invalid.

This solves the issue where MSR flags aren't set correctly when restoring a VM
snapshot, in particular the internal env->excp_prefix value when MSR_EP has
been altered by a guest.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Otherwise when cpu_post_load calls ppc_store_sdr1() when restoring a VM
snapshot the value is deemed unchanged and so the internal env->htab*
variables aren't set correctly.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Make sure that we include the adb_poll_timer when saving the VM state for
client OSs that use it, e.g. Darwin.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The parent ADBDevice contains the device id on the ADB bus. Make sure that
this state is included in both its subclasses since some clients (such as
OpenBIOS) reprogram each device id after enumeration.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This ensures that the macio PCI device is correctly configured when restoring
from a VM snapshot.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When the guest switches the interrupt endian mode, which essentially
means a global machine endian switch, we want to change the VGA
framebuffer endian mode as well in order to be backward compatible
with existing guests who don't know about the new endian control
register.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The VGA device model now supports having the framebuffer in either endian,
and can be switched between these by the guest via a register in the qext
region.

However, in some cases (e.g. LE OS on the pseries machine) we have
existing guest that don't know about the endian switch register, but other
parts of the qemu code have better information to set a default endianness
than the VGA code does of itself.

In order to allow them to set a correct default endianness in these cases,
without breaking abstraction walls, this patch exposes the VGA framebuffer
endianness via a writable QOM property.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
[agraf: use instance_init for property exposure]
Signed-off-by: NAlexander Graf <agraf@suse.de>

We call try_create_xics() to create a "xics-kvm".  If it fails, we
call it again to fall back to plain "xics".

try_create_xics() uses qdev_init().  qdev_init()'s error handling has
an unwanted side effect: it calls qerror_report_err(), which prints to
stderr.  Looks like an error, but isn't.

In QMP context, it would stash the error in the monitor instead,
making the QMP command fail.  Fortunately, it's only called from board
initialization, never in QMP context.

Clean up by cutting out the qdev_init() middle-man: set property
"realized" directly.

While there, improve the error message when we can't satisfy an
explicit user request for "xics-kvm", and exit(1) instead of abort().
Simplify the abort when we can't create "xics".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
[agraf: squash in fix for uninitialized variable from mdroth]
Signed-off-by: NAlexander Graf <agraf@suse.de>

We call ppce500_init_mpic_kvm() to create a "kvm-openpic".  If it
fails, we call ppce500_init_mpic_qemu() to fall back to plain
"openpic".

ppce500_init_mpic_kvm() uses qdev_init().  qdev_init()'s error
handling has an unwanted side effect: it calls qerror_report_err(),
which prints to stderr.  Looks like an error, but isn't.

In QMP context, it would stash the error in the monitor instead,
making the QMP command fail.  Fortunately, it's only called from board
initialization, never in QMP context.

Clean up by cutting out the qdev_init() middle-man: set property
"realized" directly.

While there, improve the error message when we can't satisfy an
explicit user request for "kvm-openpic", and exit(1) instead of
abort().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

On x86, the guest's RTC can be read with QMP, either from the RTC device's
"date" property or via the "rtc-time" property on the machine (which is an
alias to the former).  This is set up in the mc146818rtc driver, and
doesn't work on other targets.

This patch adds a similar "date" property to the pseries machine's RTAS RTC
and adds a compatible alias to the machine.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The initial creation of the PAPR RTC qdev class left a wart - the rtc's
offset was left in the sPAPREnvironment structure, accessed via a global.

This patch moves it into the RTC device's own state structure, were it
belongs.  This requires a small change to the migration stream format.  In
order to handle incoming streams from older versions, we also need to
retain the rtc_offset field in the sPAPREnvironment structure, so that it
can be loaded into via the vmsd, then pushed into the RTC device.

Since we're changing the migration format, this also takes the opportunity
to:

  * Change the rtc offset from a value in seconds to a value in
    nanoseconds, allowing nanosecond offsets between host and guest
    rtc time, if desired.

  * Remove both the already unused "next_irq" field and now unused
    "rtc_offset" field from the new version of the spapr migration
    stream
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At present the PAPR RTC isn't a "device" as such - it's accessed only via
firmware/hypervisor calls, and is handled in the sPAPR core code.  This
becomes inconvenient as we extend it in various ways.

This patch makes the PAPR RTC a separate device in the qemu device model.

For now, the only piece of device state - the rtc_offset - is still kept in
the global sPAPREnvironment structure.  That's clearly wrong, but leaving
it to be fixed in a following patch makes for a clearer separation between
the internal re-organization of the device, and the behavioural changes
(because the migration stream format needs to change slightly when the
offset is moved into the device's own state).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

In the 'pseries' machine the real time clock is provided by a
paravirtualized firmware interface rather than a device per se; the RTAS
get-time-of-day and set-time-of-day calls.

Out current implementations of those work directly off host time (with
an offset), not respecting options such as clock=vm which can be
specified in the -rtc command line option.

This patch reworks the RTAS RTC code to respect those options, primarily
by basing them on the qemu_clock_get_ns(rtc_clock) function instead of
directly on qemu_get_timedate() (which essentially handles host time, not
virtual rtc time).

As a bonus, this means our get-time-of-day function now also returns
nanoseconds.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The virtual RTC time is used in two places in the pseries machine.  First
is in the RTAS get-time-of-day function which returns the RTC time to the
guest.  Second is in the spapr events code which is used to timestamp
event messages from the hypervisor to the guest.

Currently both call qemu_get_timedate() directly, but we want to change
that so we can properly handle the various -rtc options.  In preparation,
create a helper function to return the virtual RTC time.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently, the RTAS time of day functions only partially validate the
number of parameters they receive and return.  Because of how the
parameters are used, this is unlikely to lead to a crash, but it's messy.

This patch adds the missing checks.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At the moment the RTAS (firmware/hypervisor) time of day functions are
implemented in spapr_rtas.c along with a bunch of other things.  Since
we're going to be expanding these a bit, move the RTAS RTC related code
out into new file spapr_rtc.c.  Also add its own initialization function,
spapr_rtc_init() called from the main machine init routine.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently, vmstate.h includes helper macro variants for 8, 16 and 32-bit
unsigned integers which include a "test" function which can selectively
enable or disable the field's presence in the migration stream.

There aren't similar helpers for 64-bit unsigned integers, or any size of
signed integers.  This patch remedies this.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The mc146818rtc driver exposes the current RTC date and time via the "date"
property in QOM (which is also aliased to the machine's "rtc-time"
property).  Currently it uses a custom visitor function rtc_get_date to
do this.

This patch introduces new helpers to the QOM core to expose struct tm
valued properties via a getter function, so that this functionality can be
more easily duplicated in other RTC implementations.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At the moment sPAPR only supports 512MB window for MMIO BARs. However
modern devices might want bigger 64bit BARs.

This extends MMIO window from 512MB to 62GB (aligned to
SPAPR_PCI_WINDOW_SPACING) and advertises it in 2 records in
the PHB "ranges" property. 32bit gets the space from
SPAPR_PCI_MEM_WIN_BUS_OFFSET till the end of 4GB, 64bit gets the rest
of the space. If no space is left, 64bit range is not advertised.

The MMIO space size is set to old value of 0x20000000 by default
for pseries machines older than 2.3.

The approach changes the device tree which is a guest visible change, however
it won't break migration as:
1. we do not support migration to older QEMU versions
2. migration to newer QEMU will migrate the device tree as well and since
the new layout only extends the old one and does not change address mappigns,
no breakage is expected here too.

SLOF change is required to utilize this extension.
Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The next patch will make MMIO space bigger and keep the old value for
older pseries machines.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

pseries guests can have large numbers of PCI host bridges.  To avoid the
user having to specify a number of different configuration values for every
one, the device supports an "index" property which is a shorthand setting
the various window and configuration addresses from a predefined sensible
set.

There are some problems with the details at present:
  * The "index" propery is signed, but negative values will create PCI
windows below where we expect, potentially colliding with other devices
  * No limit is imposed on the "index" property and large values can
translate to extremely large window addresses.  With PCI passthrough in
particular this can mean we exceed various mapping and physical address
limits causing the guest host bridge to not work in strange ways.

This patch addresses this, by making "index" unsigned, and imposing a
limit.  Currently the limit allows indices from 0..255 which is probably
enough host bridges for the time being.  It's fairly easy to extend if
we discover we need more.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We look at two sizes specified in ISA (4K, 64K). If not found matching,
we consider it 16MB.

Without this patch we would fail to lookup address above 16MB range.
Below 16MB happened to work before because the kernel have a liner
mapping and we always looked up hash for 0xc000000000000000. The
actual real address was computed by using the 16MB offset
with the real address found with the above hash.

Without Fix:
(gdb) x/16x 0xc000000001000000
0xc000000001000000 <list_entries+453208>:       Cannot access memory at address 0xc000000001000000
(gdb)

With Fix:
(gdb)  x/16x 0xc000000001000000
0xc000000001000000 <list_entries+453208>:       0x00000000      0x00000000      0x00000000      0x00000000
0xc000000001000010 <list_entries+453224>:       0x00000000      0x00000000      0x00000000      0x00000000
0xc000000001000020 <list_entries+453240>:       0x00000000      0x00000000      0x00000000      0x00000000
0xc000000001000030 <list_entries+453256>:       0x00000000      0x00000000      0x00000000      0x00000000
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Instead of tweaking a TCE table device by adding there a bypass flag,
let's add an alias to RAM and IOMMU memory region, and enable/disable
those according to the selected bypass mode.
This way IOMMU memory region can have size of the actual window rather
than ram_size which is essential for upcoming DDW support.

This moves bypass logic to VIO layer and keeps @bypass flag in TCE table
for migration compatibility only. This replaces spapr_tce_set_bypass()
calls with explicit assignment to avoid confusion as the function could
do something more that just syncing the @bypass flag.

This adds a pointer to VIO device into the sPAPRTCETable struct to provide
the sPAPRTCETable device a way to update bypass mode for the VIO device.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (130 commits)
  acpi: drop unused code
  aml-build: comment fix
  acpi-build: fix typo in comment
  acpi: update generated files
  vhost user:support vhost user nic for non msi guests
  aml-build: fix build for glib < 2.22
  acpi: update generated files
  Makefile.target: binary depends on config-devices
  acpi-test-data: update after pci rewrite
  acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
  pci-hotplug-old: Has been dead for five major releases, bury
  pci: Give a few helpers internal linkage
  acpi: make build_*() routines static to aml-build.c
  pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
  pc: acpi-build: drop template patching and create PCI bus tree dynamically
  tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
  pc: acpi-build: simplify PCI bus tree generation
  tests: add ACPI blobs for qemu with bridge cases
  tests: bios-tables-test: add support for testing bridges
  tests: ACPI test blobs update due to PCI0._CRS changes
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Conflicts:
	hw/pci/pci-hotplug-old.c

Xtensa updates:

- implement do_unassigned_access callback;
- fix ML605 xtfpga FLASH size.

# gpg: Signature made Sat Mar  7 12:35:05 2015 GMT using RSA key ID F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"

* remotes/xtensa/tags/20150307-xtensa:
  target-xtensa: xtfpga: fix ml605 flash size
  target-xtensa: implement do_unassigned_access callback
  hw/xtensa: allow reads/writes in the system I/O region
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/qmp-unstable/queue/qmp:
  docs: add memory-hotplug.txt
  qemu-options.hx: improve -m description
  virtio-balloon: Add some trace events
  virtio-balloon: Fix balloon not working correctly when hotplug memory
  pc-dimm: add a function to calculate VM's current RAM size
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Recent changes left acpi_get_hex unused,
and clag is unhappy about it:
    error: unused function 'acpi_get_hex'

Drop it, as well as some unused macros.
Signer-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

misc spice/qxl fixes.

# gpg: Signature made Wed Mar  4 13:57:42 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-20150304-1:
  hmp: info spice: take out webdav
  hmp: info spice: Show string channel name
  qxl: drop update_displaychangelistener call for secondary qxl devices
  vga: refactor vram_size clamping and rounding
  qxl: refactor rounding up to a nearest power of 2
  spice: fix invalid memory access to vga.vram
  qxl: document minimal video memory for new modes
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set

# gpg: Signature made Tue Mar  3 07:38:43 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20150303-1:
  xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>