Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The HW cursor cannot be painted on a shared surface. This fixes HW
cursor display in Windows NT 4.0 and Windows 98.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This prevents surface sharing which will be necessary to
fix cirrus HW cursor support.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay

# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (47 commits)
  sdhci: Support SDHCI devices on PCI
  sdhci: Define SDHCI PCI ids
  sdhci: Add "sysbus" to sdhci QOM types and methods
  sdhci: Remove class "virtual" methods
  sdhci: Set a default frequency clock
  serial: only resample THR interrupt on rising edge of IER.THRI
  serial: update LSR on enabling/disabling FIFOs
  serial: clean up THRE/TEMT handling
  serial: reset thri_pending on IER writes with THRI=0
  linuxboot: fix loading old kernels
  kvm/apic: fix 2.2->2.1 migration
  target-i386: add Ivy Bridge CPU model
  target-i386: add f16c and rdrand to Haswell and Broadwell
  target-i386: add VME to all CPUs
  pc: add 2.3 machine types
  i386: do not cross the pages boundaries in replay mode
  cpus: make icount warp behave well with respect to stop/cont
  timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
  cpu-exec: invalidate nocache translation if they are interrupted
  icount: introduce cpu_get_icount_raw
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Support for PCI devices following the "SD Host Controller Simplified
Specification Version 2.00" spec.
Signed-off-by: NKevin O'Connor <kevin@koconnor.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NKevin O'Connor <kevin@koconnor.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Update the sdhci sysbus QOM types and methods so that sysbus is in
their name.  This is in preparation for adding PCI versions of these
types and methods.
Signed-off-by: NKevin O'Connor <kevin@koconnor.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The SDHCIClass defines a series of class "methods".  However, no code
in the QEMU tree overrides these methods or even uses them outside of
sdhci.c.

Remove the virtual methods and replace them with direct calls to the
underlying functions.  This simplifies the process of extending the
sdhci code to support PCI devices (which have a different parent
class).
Signed-off-by: NKevin O'Connor <kevin@koconnor.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The Linux SDHCI PCI driver will only register the device if there is a
clock frequency set.  So, set a default frequency of 52Mhz.
Signed-off-by: NKevin O'Connor <kevin@koconnor.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There is disagreement on whether LSR.THRE should be resampled when
IER.THRI goes from 1 to 1.  Bochs only does it if IER.THRI goes from 0
to 1; PCE does it even if IER.THRI is unchanged.  But the Windows driver
seems to always go from 1 to 0 and back to 1, so do things in agreement
with Bochs, because the handling of thr_ipending was reported in 2010
(https://lists.gnu.org/archive/html/qemu-devel/2010-03/msg01914.html)
as breaking DR-DOS Plus.
Reported-by: NRoy Tam <roytam@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the transmit FIFO is emptied or enabled, the transmitter
hold register is empty.  When it is disabled, it is also emptied and
in addition the previous contents of the transmitter hold register
are discarded.  In either case, the THRE bit in LSR must be set and
THRI raised.

When the receive FIFO is emptied or enabled, the data ready and break
bits must be cleared in LSR.  Likewise when the receive FIFO is disabled.
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- assert TEMT is cleared before sending a character; we'll get one from
TSR if tsr_retry > 0, from the FIFO or THR otherwise

- assert THRE cleared and FIFO not empty (if enabled) before fetching a
character to send.  This effectively reverts dffacd46, but the check
makes no sense and commit f702e62a (serial: change retry logic to avoid
concurrency, 2014-07-11) must have made it unnecessary.  The commit
message for f702e62a talks about multiple calls to qemu_chr_fe_add_watch
triggering s->tsr_retry >= MAX_XMIT_RETRY, but other failures were
possible.  For example, if you have multiple calls, the subsequent ones
will see s->tsr_retry == 0 and will find THRE and/or TEMT on entry.

- for clarity, raise THRI immediately after the code sets THRE

- check THRE to see if another character has to be sent.  This makes
the assertions more obvious and also means TEMT has to be set as soon as
the loop ends.  It makes the loop send both TSR and THR if flow-control
happens in non-FIFO mode.  Previously, THR would be lost.

- clear TEMT together with THRE even in the non-FIFO case

The last two items are bugfixes, but they were just found by inspection
and do not squash known bugs.
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is responsible for failure of migration from 2.2 to 2.1, because
thr_ipending is always one in practice.

serial.c is setting thr_ipending unconditionally.  However, thr_ipending
is not used at all if THRI=0, and it will be overwritten again the next
time THRE or THRI changes.  For that reason, we can set thr_ipending to
zero every time THRI is reset.

There is disagreement on whether LSR.THRE should be resampled when IER.THRI
goes from 1 to 1.  This patch does not touch the code, leaving that for
QEMU 2.3+.

This has no semantic change and is enough to fix migration in the common
case where the interrupt is not pending or is reported in IIR.  It does not
change the migration format, so 2.2.0 -> 2.1 will remain broken but we
can fix 2.2.1 -> 2.1 without breaking 2.2.1 <-> 2.2.0.

The case that remains broken (the one in which the subsection is strictly
necessary) is when THRE=1, the THRI interrupt has *not* been acknowledged
yet, and a higher-priority interrupt comes.  In this case, you need the
subsection to tell the source that the lower-priority THRI interrupt is
pending.  The subsection's breakage of migration, in this case, prevents
continuing the VM on the destination with an invalid state.

Cc: qemu-stable@nongnu.org
Reported-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Old kernels that used high memory only allowed the initrd to be in the
first 896MB of memory.  If you load the initrd above, they complain
that "initrd extends beyond end of memory".

In order to fix this, while not breaking machines with small amounts
of memory fixed by cdebec5e (linuxboot: compute initrd loading address,
2014-10-06), we need to distinguish two cases.  If pc.c placed the
initrd at end of memory, use the new algorithm based on the e801
memory map.  If instead pc.c placed the initrd at the maximum address
specified by the bzImage, leave it there.

The only interesting part is that the low-memory info block is now
loaded very early, in real mode, and thus the 32-bit address has
to be converted into a real mode segment.  The initrd address is
also patched in the info block before entering real mode, it is
simpler that way.

This fixes booting the RHEL4.8 32-bit installation image with 1GB
of RAM.

Cc: qemu-stable@nongnu.org
Cc: mst@redhat.com
Cc: jsnow@redhat.com
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The wait_for_sipi field is set back to 1 after an INIT, so it was not
effective to reset it in kvm_apic_realize.  Introduce a reset callback
and reset wait_for_sipi there.
Reported-by: NIgor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Both were added in Ivy Bridge (for which we do not have a CPU model
yet!).
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

vm86 mode extensions date back to the 486.  All models should have
them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The next patch will differentiate them.
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch denies crossing the boundary of the pages in the replay mode,
because it can cause an exception. Do it only when boundary is
crossed by the first instruction in the block.
If current instruction already crossed the bound - it's ok,
because an exception hasn't stopped this code.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch makes icount warp use the new QEMU_CLOCK_VIRTUAL_RT clock.
This way, icount's QEMU_CLOCK_VIRTUAL will never count time during which
the virtual machine is stopped.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch introduces new QEMU_CLOCK_VIRTUAL_RT clock, which
should be used for icount warping.  In the next patch, it
will be used to avoid a huge icount warp when a virtual
machine is stopped for a long time.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In this case, QEMU might longjmp out of cpu-exec.c and miss the final
cleanup in cpu_exec_nocache.  Do this manually through a new compile
flag.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Separate accessing the instruction counter from the compensation for
speed and halting that are introduced by qemu_icount_bias.  This
introduces new infrastructure used by the record/replay patches.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch sets can_do_io function to allow reading icount
within cpu-exec, but outside TB execution.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Exception index is reset at every entry at every entry into cpu_exec()
function. This may cause missing the exceptions while replaying them.
This patch moves exception_index reset to the locations where they are
processed.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In icount mode cpu_exec_nocache function is used to execute part of the
existing TB. At the end of cpu_exec_nocache newly created TB is deleted.
Sometimes io_read function needs to recompile current TB and restart TB
lookup and execution. After that tb_find_fast function finds old (bigger)
TB again. This TB cannot be executed (because icount is not big enough)
and cpu_exec_nocache is called again. Such a loop continues over and over.
This patch deletes old TB and avoids finding it in the TB cache.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The QEMU block layer has a limit of INT_MAX bytes per transfer.

Expose it in the block limits VPD page for both regular transfers
and WRITE SAME.
Reported-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Coccinelle semantic patch:

    @@
    expression LHS, SZ;
    @@
    -       LHS = g_malloc(SZ);
    -       memset(LHS, 0, SZ);
    +       LHS = g_malloc0(SZ);
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Coccinelle semantic patch:

    @@
    expression LHS, SZ;
    @@
    -       LHS = g_malloc(SZ);
    -       memset(LHS, 0, SZ);
    +       LHS = g_malloc0(SZ);
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add xsaves related definition, it also adds corresponding part
to kvm_get/put, and vmstate.
Signed-off-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use the external qemu-timer API instead.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These represent xsave-related capabilities of the processor, and KVM may
or may not support them.

Add feature bits so that they are considered by "-cpu ...,enforce", and use
the new feature work instead of calling kvm_arch_get_supported_cpuid.

Bit 3 (XSAVES) is not migratables because it requires saving MSR_IA32_XSS.
Neither KVM nor any commonly available hardware supports it anyway.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Paolo Bonzini reported that Coverity reports an uninitialized pad value.
Let's use a designated initializer for kvm_irq_routing_entry to avoid
this false positive. This is similar to kvm_irqchip_add_msi_route and
other users of kvm_irq_routing_entry.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>