Use a qemu_irq to request CPU exit.

7 compilations less for the full build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use a qemu_irq to indicate A20 line changes. Move I/O port 92
to pckbd.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Libc will fallback gracefully if pselect6 is not available. Thus put
pselect6 to nowarn until the atomicity issues of the original pselect6
patch are dealt with.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Cc: Michael Casadevall <mcasadevall@ubuntu.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Saves one bundle per memory operation.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

(1) The output registers were not marked call-clobbered, even though
    they can be modified by called functions.
(2) The thread pointer was not marked reserved.
(3) R4-R6 are call-saved, but not saved by the prologue.  Rather than
    save them, mark them reserved so that we don't use them.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that the prologue is generated after GUEST_BASE is fixed,
we can load it as an immediate, and also avoid reserving the
register if it isn't necessary.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This will allow backends to make intelligent choices about how
to implement GUEST_BASE.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Alpha passes oldset by value in a register, and returns the newset
as the return value; as compared to the standard implementation in
which both are passed by reference.  This requires being able to
distinguish negative return values that are not errors.  Do this in
the same way as the Alpha Linux kernel, by storing a zero in V0 in
the implementation of the syscall.

At the same time, fix a think-o in the regular sigprocmask path in
which we passed the target, rather than the host, HOW value.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Alpha passes the signal set in a register, not by reference.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Put ppid in the second return register.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

At the same time, tidy the code wrt MIPS and SH4 which have the
same two register return mechanism.  Fix confusion between pipe
and pipe2 with an explicit flags=0, when the guest will not be
using the two register return mechanism.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The result is shorter than the mov+add that TCG would
otherwise generate for us.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Implement full modrm+sib addressing mode processing.
Use that in qemu_ld/st to output the LEA.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define and use OPC_XCHG_ax_r32.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define and use OPC_IMUL_GvEv{,Ib,Iz}.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define OPC_GRP3 and EXT3_FOO to match.  Use them instead of
bare constants.

Define OPC_GRP5 and rename the existing EXT_BAR to EXT5_BAR to
make it clear which extension should be used with which opcode.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define and use OPC_SETCC.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define and use OPC_RET.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define OPC_CALL_Jz, generated by tcg_out_calli; use the later
throughout.  Unify the calls within qemu_st; adjust the stack
with a single pop if applicable.

Define and use EXT_CALLN_Ev for indirect calls.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Move tcg_out_push/pop up in the file so that they can be used
by qemu_ld/st.  Define a tcg_out_pushi to be used as well.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define and use OPC_MOVL_Iv.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add more OPC values, and tgen_arithr.  Use the later throughout.

Note that normal reg/reg arithmetic now uses the Gv,Ev opcode form
instead of the Ev,Gv opcode form used previously.  Both forms
disassemble properly, and so there's no visible change when diffing
log files before and after the change.  This change makes the operand
ordering within the output routines more natural, and avoids the need
to define an OPC_ARITH_EvGv since a read-modify-write with memory is
not needed within TCG.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define OPC_ARITH_EvI[bz]; use throughout.  Use tcg_out_ext8u
directly in setcond.  Use tgen_arithi in qemu_ld/st.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define OPC_MOVSBL and OPC_MOVSWL.  Factor opcode emission to
separate functions.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define OPC_MOVZBL and OPC_MOVZWL.  Factor opcode emission to
separate functions.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NEdgar E. Iglesias <edgar@axis.com>

Signed-off-by: NBernhard Kauer <kauer@tudos.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

In oneshot mode, the delta needs to come from the TimerLoad register,
not the maximum limit.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reload the timer when TimerControl is written, if the timer is to be
enabled.  Otherwise, if an earlier write to TimerLoad was done while
periodic mode was not set, s->delta may incorrectly still have the value
of the maximum limit instead of the value written to TimerLoad.

This problem is evident on versatileap on current linux-next, which
enables TIMER_CTRL_32BIT before writing to TimerLoad and then enabling
periodic mode and starting the timer.  This causes the first periodic
tick to be scheduled to occur after 0xffffffff periods, leading to a
perceived hang while the kernel waits for the first timer tick.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add support to read manufacturer and device ID. For everything else (eg.
lock bits) 0 is returned.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit 3d53f5c3 introduced a segfault by erroneously making fw_cfg a
'void **' and passing it around in different ways.
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Computing carry is trivial for some inputs.  By avoiding an
external function call, we generate near-optimal code for
the common cases of add+addx (double-word arithmetic) and
cmp+addx (a setcc pattern).
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Define OPC_JCC*, OC_JMP*, and EXT_JMPN_Ev.  Use them throughout.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

If the address register overlaps one of the output registers
simply issue the clobbering load last, rather than emitting
an extra move of the address register.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Define OPC_MOVB* and OPC_MOVL*; use them throughout.
Use tcg_out_ld/st instead of bare tcg_out_modrm_offset
when it makes sense.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>