- 16 7月, 2009 19 次提交
-
-
由 Christoph Hellwig 提交于
The VM state offset is a concept internal to the image format. Replace the old bdrv_{get,put}_buffer method that require an index into the image file that is constructed from the VM state offset and an offset into the vmstate with the bdrv_{load,save}_vmstate that just take an offset into the VM state. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
We're marking the used entry bitmap in smbios_load_external() for each type we check, regardless of whether we loaded anything. This makes subsequent calls behave as if we've already loaded the tables from qemu and can result in missing tables (ex. multiple type4 entries on an SMP guest). Only mark the bitmap if we actually load something. Signed-off-by: NAlex Williamson <alex.williamson@hp.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This allows to set segment registers via gdb also in system emulation mode. Basic sanity checks are applied and nothing is changed if they fail. But screwing up the target via this interface will never be complicated, so I avoided being too paranoid here. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Clarify gdb's register set layout by using constants for cpu_gdb_read/write_register. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This patch adds support for the vCont remote gdb command. It is used by gdb 6.8 or better to switch the debugging focus for single-stepping multi-threaded targets, ie. multi-threaded application in user mode emulation or VCPUs in system emulation. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This got broken between a13a4126 and c92ef6a2: old slirp code used 255.255.255.0. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Disable the lengthy BIOS prompt for selecting a boot device by default, but let the user reenable it via '-boot menu=on'. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This allows to specify an exceptional boot order only for the first startup of the guest. After reboot, qemu will switch back to the default order (or what was specified via 'order='). Makes installing from CD images and then booting the freshly set up harddisk more handy. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Will be used by '-boot once=...', and should also help in other use cases. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Convert the reset handler maintenance code to TAILQ services. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Move registration function for the boot_set callback handler and provide qemu_boot_set so that it can also be used outside the monitor code. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This patch changes the boot command line option to the canonical format -boot [order=drives][,...] where 'drives' is using the same format as the old -boot. The format switch allows to add the 'menu' and 'once' options in later patches. The old format is still understood and will be processed at least for a transition time. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
Add a pc-0-10 machine type to allow a pc machine to be created with virtio block and console devices compatibility with qemu-0.10.x. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
We're using PCI_CLASS_DISPLAY_OTHER now, but qemu-kvm.git is using PCI_CLASS_OTHERS because: "As a PCI_CLASS_DISPLAY_OTHER, it reduces primary display somehow on Windows XP (possibly Windows disables acceleration since it fails to find a driver)." While this is valid, many versions of X will get confused by it. Class major number of 0 gets treated as a possibly prehistoric VGA device, and then the autoconfig logic gets confused trying to figure out whether the virtio console or the pv vga device are the real VGA. We should really set a proper class ID. 0x0780 (serial / other) seems most appropriate. This shouldn't require any kernel changes, the modalias for virtio looks like: alias: pci:v00001AF4d*sv*sd*bc*sc*i* so won't care what the base class or subclass are. It shows up in the guest as: 00:05.0 Communication controller: Qumranet, Inc. Virtio console A new qdev type is introduced to allow devices using the old class to be created for compatibility with qemu-0.10.x. Reported-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
Windows virtio driver cannot pass DTM (certification) tests while the storage class is PCI_CLASS_STORAGE_UNKNOWN. A new qdev type is introduced to allow devices using the old class to be created for compatibility with qemu-0.10.x. Reported-by: NDor Laor <dlaor@redhat.com> Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 15 7月, 2009 3 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 14 7月, 2009 2 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 13 7月, 2009 8 次提交
-
-
由 Baojun Wang 提交于
According to PPC440 user manual, PPC 440 supports ``mftb'' even it's a preserved instruction: PPC440_UM2013.pdf, p.445, table A-3 when I compile a kernel (2.6.30, bamboo_defconfig/440EP & canyonlands/460EX), I can see ``mftb'' by using ppc-xxx-objdump vmlinux I have also checked the ppc 440x[456], 460S, 464, they also should support mftb. The following patch enable mftb for all ppc 440 variants, including: 440EP, 440GP, 440x4, 440x5 and 460 Signed-off-by: NBaojun Wang <wangbj@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Baojun Wang 提交于
Signed-off-by: NBaojun Wang <wangbj@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
The powerpc xml files contained a hack--an empty, non-existent register--for getting the register numbers to line up for newer (XML-aware) and older (non-XML-aware) GDB. While this hack worked in some cases, it didn't work in all cases, notably when the user used `finish' or `continue': GDB would attempt to read the non-existent register and QEMU would complain. This patch fixes things up properly. Instead of inserting a fake register, we explicitly declare the floating-point and SPE registers to start at 71. This action accomplishes the same thing as the nasty hack, except that now GDB never tries to fetch the non-existant register 70. Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
For 32-bit PPC targets, we translated: evmergelo rX, rX, rY as: rX-lo = rY-lo rX-hi = rX-lo which is wrong, because we should be transferring rX-lo first. This problem is fixed by swapping the order in which we write the parts of rX. Similarly, we translated: evmergelohi rX, rX, rY as: rX-lo = rY-hi rX-hi = rX-lo In this case, we can't swap the assignment statements, because that would just cause problems for: evmergelohi rX, rY, rX Instead, we detect the first case and save rX-lo in a temporary variable: tmp = rX-lo rX-lo = rY-hi rX-hi = tmp These problems don't occur on PPC64 targets because we don't split the SPE registers into hi/lo parts for such targets. Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Tristan Gingold 提交于
Use parameter 'next' to fix the hdecr case. Also pass 'next' by value instead of pointer (more easy to read and no performance issue for an always_inline function). Signed-off-by: NTristan Gingold <gingold@adacore.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Also increase QDEV_MAX_MMIO. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 12 7月, 2009 8 次提交
-
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paul Brook 提交于
Fix botched merge of op_ldst_sc calls to match actual implementation. Thanks to Aurelien Jarno for diagnosing this. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor Kovalenko 提交于
On Sun, Jul 12, 2009 at 12:09 PM, Blue Swirl<blauwirbel@gmail.com> wrote: > On 7/12/09, Igor Kovalenko <igor.v.kovalenko@gmail.com> wrote: >> Good trap handling is required to process interrupts. >> This patch fixes the following: >> >> - sparc64 has no wim register >> - sparc64 has no psret register, use IE bit of pstate >> extract IE checking code to cpu_interrupts_enabled >> - alternate globals are not available if cpu has GL feature >> in this case bit AG of pstate is constant zero >> - write to pstate must actually write pstate >> even if cpu has GL feature >> >> Also timer interrupt is handled using do_interrupt. > > A bit too much for one patch. Please also remove the code instead of > commenting out. I now excluded timer interrupt related part. To my mind other changes are essentially tied together. > PUT_PSR for Sparc64 needs CC_OP = CC_OP_FLAGS; like Sparc32. Fixed, please find attached the updated version. -- Kind regards, Igor V. Kovalenko
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor Kovalenko 提交于
On Sun, Jul 12, 2009 at 12:43 AM, Stuart Brady<sdbrady@ntlworld.com> wrote: > On Sat, Jul 11, 2009 at 10:22:18PM +0400, Igor Kovalenko wrote: >> It is clear that intention is to byte-swap value to be written, not >> the target address. > > @@ -1949,13 +1949,13 @@ void helper_st_asi(target_ulong addr, ta > case 0x89: // Secondary LE > switch(size) { > case 2: > - addr = bswap16(addr); > + addr = bswap16(val); > ^^^^ > Shouldn't that be 'val = bswap16(val)' (and likewise for the 32-bit and > 64-bit cases)? Also needs a 'signed-off-by:'... > > Cheers, > -- > Stuart Brady > Thanks, that part I did not runtime-tested. Not sure if those asi stores are of any use for user-mode emulator. Please find attached the corrected version. Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko
-
由 Igor Kovalenko 提交于
Allocate irq just before passing it to pci bridge initialization and actually use it to initialize pci bridge. Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko
-
由 Igor Kovalenko 提交于
This patch extracts common part of sparc64 tag matching code used by IMMU and DMMU lookups. Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko
-