- 03 6月, 2013 1 次提交
-
-
由 Stefano Stabellini 提交于
We are currently setting the PCI hole to start at HVM_BELOW_4G_RAM_END, that is 0xf0000000. Start the PCI hole at 0xe0000000 instead, that is the same value used by pc_init1 and qemu-xen-traditional. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> CC: qemu-stable@nongnu.org
-
- 02 6月, 2013 2 次提交
-
-
由 Michael S. Tsirkin 提交于
Less header dependencies this way. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Laszlo Ersek 提交于
Currently some places use pointer-to-void even though they mean pointer-to-FWCfgState. Clean them up. Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 22 5月, 2013 1 次提交
-
-
由 Dmitry Fleytman 提交于
Virtio-net driver currently negotiates network offloads on startup via features mechanism and have no ability to disable and re-enable offloads later. This patch introduced a new control command that allows to configure device network offloads state dynamically. The patch also introduces a new feature flag VIRTIO_NET_F_CTRL_GUEST_OFFLOADS. Signed-off-by: NDmitry Fleytman <dfleytma@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Message-id: 20130520081814.GA8162@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 18 5月, 2013 1 次提交
-
-
由 Michael Tokarev 提交于
Some source files #include the same header more than once for no good reason. Remove second #includes in such cases. Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 13 5月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
This reverts commit 9953f882. While Markus's analysis is entirely correct, there are 1.6 patches that fix the bug for real and without requiring machine type hacks. Let's think of the children who will have to read this code, and avoid a complicated mess of semantics that differ between <1.5, 1.5, and >1.5. Conflicts: hw/i386/pc_piix.c hw/i386/pc_q35.c include/hw/i386/pc.h Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 5月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
This changes the model number of 486 to 8 (DX4) which matches the feature set presented, and actually has the CPUID instruction. This adds a compatibility property, to keep model=0 on pc-*-1.4 and older. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> [AF: Add compat_props entry] Tested-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 01 5月, 2013 2 次提交
-
-
由 Igor Mammedov 提交于
Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Igor Mammedov 提交于
X86CPU should have parent bus so it could provide bus for child APIC. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 30 4月, 2013 1 次提交
-
-
由 Hu Tao 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NHu Tao <hutao@cn.fujitsu.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-id: f840042f0e1205041f8feaf0d39ca639884f3a00.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 25 4月, 2013 1 次提交
-
-
由 Markus Armbruster 提交于
Use of a flash memory device for the BIOS was added in series "[PATCH v10 0/8] PC system flash support", commit 4732dcaf..1b89fafe, v1.1. Flash vs. ROM is a guest-visible difference. Thus, flash use had to be suppressed for machine types pc-1.0 and older. This was accomplished by adding a dummy device "pc-sysfw" with property "rom_only": * Non-zero rom_only means "use ROM". Default for pc-1.0 and older. * Zero rom_only means "maybe use flash". Default for newer machines. Not only is the dummy device ugly, it was also retroactively added to the older machine types! Fortunately, it's not guest-visible (thus no immediate guest ABI breakage), and has no vmstate (thus no immediate migration breakage). Breakage occurs only if the user unwisely enables flash by setting rom_only to zero. Patch review FAIL #1. Why "maybe use flash"? Flash didn't (and still doesn't) work with KVM. Therefore, rom_only=0 really means "use flash, except when KVM is enabled, use ROM". This is a Bad Idea, because it makes enabling/ disabling KVM guest-visible. Patch review FAIL #2. Aside: it also precludes migrating between KVM on and off, but that's not possible for other reasons anyway. Fix as follows: 1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts, or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything for older machines (to remain bug-compatible). 2. Change the default value from 0 to 1 for these machines. Necessary, because 0 doesn't work with KVM. Once it does, we can flip the default back to 0. 3. Don't revert the retroactive addition of device "pc-sysfw" to older machine types. Seems not worth the trouble. 4. Add a TODO comment asking for device "pc-sysfw" to be dropped once flash works with KVM. Net effect is that you get a BIOS ROM again even when KVM is disabled, just like for machines predating the introduction of flash. To get flash instead, use "--global pc-sysfw.rom_only=0". Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 15 4月, 2013 1 次提交
-
-
由 Michael S. Tsirkin 提交于
Functions defined in acpi/ should be declared in acpi.h Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 09 4月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 05 4月, 2013 3 次提交
-
-
由 Laszlo Ersek 提交于
Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-8-git-send-email-lersek@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Laszlo Ersek 提交于
As one consequence, strtok() -- which modifies its argument -- is replaced with g_strsplit(). Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-6-git-send-email-lersek@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Laszlo Ersek 提交于
The data is binary, not textual. Also, acpi_table_add() abuses the "char *f" pointer -- which normally points to file names to load -- to poke into the table. Introduce "char unsigned *table_start" for that purpose. Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-3-git-send-email-lersek@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 18 3月, 2013 1 次提交
-
-
由 Gerd Hoffmann 提交于
All PCI nics are switched to EFI-enabled roms by default. They are composed from three images (legacy, efi ia32 & efi x86), so classic pxe booting will continue to work. Exception: eepro100 is not switched, it uses a single rom for all emulated eepro100 variants, then goes patch the rom header on the fly with the correct PCI IDs. I doubt that will work as-is with the efi roms. Keep old roms for 1.4+older machine types via compat properties, needed because the efi-enabled roms are larger so the pci rom bar size would change. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 01 3月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 27 2月, 2013 1 次提交
-
-
由 Gal Hammer 提交于
The virtio-serial device is expected to use 2 MSI vectors, one for control queue and a second shared for all queues. Signed-off-by: NGal Hammer <ghammer@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 23 2月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Adds both pc-i440fx-1.4 and pc-q35-1.4. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 17 1月, 2013 1 次提交
-
-
由 Wenchao Xia 提交于
This patch change all info call back function to take additional QDict * parameter, which allow those command take parameter. Now it is set to NULL at default case. Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 04 1月, 2013 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 19 12月, 2012 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 26 11月, 2012 2 次提交
-
-
由 Jason Baron 提交于
Move ioapic_init() from pc_piix.c to pc.c, to make it a common function. Rename ioapic_init() -> ioapic_init_gsi(). Move to pc.h so q35 can use them as well. Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
Factor out pc nic initialization. This simplifies the pc initialization and will reduce the code duplication of q35 pc initialization. Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 10月, 2012 2 次提交
-
-
由 Avi Kivity 提交于
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Split serial.c into serial.c, serial.h and serial-isa.c. While being at creating a serial.h header file move the serial prototypes from pc.h to the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of boards which just want the serial bits from pc.h Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 10月, 2012 2 次提交
-
-
由 Aurelien Jarno 提交于
Now that all machines call isa_vga_init() or pci_vga_init(), some unused code can be removed. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
This better explains what is this function about. Adjust all callers. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 27 8月, 2012 1 次提交
-
-
由 malc 提交于
This reverts commit 482f7bf8. Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 24 8月, 2012 1 次提交
-
-
由 Matthew Ogilvie 提交于
This patch adds some optional compatibility hacks (default disabled) to allow Microport UNIX to function under qemu. I've tried to structure it to be easy to add more hacks for other old CGA programs, if anyone ever needs them. Microport UNIX System V/386 v 2.1 (ca 1987) tries to program the CGA registers directly with neither the assistance of BIOS, nor with proper handling of EGA/VGA-only registers. Note that it didn't work on real VGA hardware, either (although in that case, the most obvious problems seemed to be out-of-range hsync and/or vsync signalling, rather than the issues in this patch). Eventually real MDA and/or CGA support might provide an alternative to this patch, although a hybrid approach like this patch might still be useful in marginal cases. Signed-off-by: NMatthew Ogilvie <mmogilvi_qemu@miniinfo.net> Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 16 8月, 2012 1 次提交
-
-
由 zhlcindy@gmail.com 提交于
Functions pci_vga_init() and pci_cirrus_vga_init() are declared in pc.h. That prevents other platforms (e.g. sPAPR) to use them. This patch is to create one new file vga-pci.h and move the declarations to vga-pci.h, so that they can be shared by all platforms. This patch also cleans up on all platforms. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 20 6月, 2012 1 次提交
-
-
由 Gleb Natapov 提交于
This patch adds two things. First it allows QEMU to distinguish between regular powerdown and S4 powerdown. Later separate QMP notification will be added for S4 powerdown. Second it allows S3/S4 states to be disabled from QEMU command line. Some guests known to be broken with regards to power management, but allow to use it anyway. Using new properties management will be able to disable S3/S4 for such guests. Supported system state are passed to a firmware using new fw_cfg file. The file contains 6 byte array. Each byte represents one system state. If byte at offset X has its MSB set it means that system state X is supported and to enter it guest should use the value from lowest 3 bits. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 25 2月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
This patch switches pc s3 suspend over to the new infrastructure. The cmos_s3 qemu_irq is killed, the new notifier is used instead. The xen hack goes away with that too, the hypercall can simply be done in a notifier function now. This patch also makes the guest actually stay suspended instead of leaving suspend instantly, so it is useful for more than just testing whenever the suspend/resume cycle actually works. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 2月, 2012 1 次提交
-
-
由 Jordan Justen 提交于
Signed-off-by: NJordan Justen <jordan.l.justen@intel.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 2月, 2012 2 次提交
-
-
由 Jan Kiszka 提交于
Convert the PC speaker device to a qdev ISA model. Move the public interface to a dedicated header file at this chance. CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Move the public interface of the PIT into its own header file and update all users. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 1月, 2012 1 次提交
-
-
由 Blue Swirl 提交于
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 19 1月, 2012 1 次提交
-
-
由 Jan Kiszka 提交于
Introduce the alternative 'kvm-i8259' device model that exploits KVM in-kernel acceleration. The PIIX3 initialization code is furthermore extended by KVM specific IRQ route setup. GSI injection differs in KVM mode from the user space model. As we can dispatch ISA-range IRQs to both IOAPIC and PIC inside the kernel, we do not need to inject them separately. This is reflected by a KVM-specific GSI handler. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
-