- 11 8月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
As requested by avi: driver != device model. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
由 Luiz Capitulino 提交于
Commit 751c6a17 changed the monitor's 'commit' command to this behavior: 1. Any string you type as argument will cause do_commit() to call bdrv_commit() to all devices 2. If you enter a device name, it will be the only one ignored by do_commit() :) The fix is to call bdrv_commit() to the specified device only and ignore the others (when 'all' is not specified). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
- 01 8月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 30 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 7月, 2009 2 次提交
-
-
由 Mark McLoughlin 提交于
Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
Add monitor commands to support passing file descriptors via SCM_RIGHTS. getfd assigns the passed file descriptor a name for use with other monitor commands. closefd allows passed file descriptors to be closed. If a monitor command actually uses a named file descriptor, closefd will not be required. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 7月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
Useful for testing hardware emulations or manipulating its state to stress guest drivers. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 16 7月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
Move registration function for the boot_set callback handler and provide qemu_boot_set so that it can also be used outside the monitor code. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 7月, 2009 2 次提交
-
-
由 Isaku Yamahata 提交于
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Huang Ying 提交于
- MCE features are initialized when VCPU is intialized according to CPUID. - A monitor command "mce" is added to inject a MCE. - A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE. aliguori: fix build for linux-user Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 30 6月, 2009 2 次提交
-
-
由 Jan Kiszka 提交于
Refactor the ACL monitor interface to make full use of the monitor command dispatcher. This also gives proper help formatting and command completion. Note that 'acl allow' and 'acl deny' were combined to 'acl_add aclname match allow|deny [index]' for consistency reasons. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 6月, 2009 2 次提交
-
-
由 Jan Kiszka 提交于
As agreed on the mailing list, there is no interest in keeping the usually disabled slirp statistics in the tree. So this patch removes them. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Break out sockstats from the slirp statistics and present them under the new info category "usernet". This patch also improves the current output /wrt proper reporting connection source and destination. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 6月, 2009 4 次提交
-
-
由 Luiz Capitulino 提交于
Move code to extract command name into a function of its own, this clearifies the code and let us remove two variables from monitor_handle_command(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
The local pointer 'q' is not used by monitor_handle_command(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
The 'return' statement at the of monitor_handle_command() is not needed and can be removed. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
The 'found' goto in monitor_handle_command() can be dropped if we check for 'cmd->name' after looking up for the command to execute. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 06 6月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 05 6月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 28 5月, 2009 1 次提交
-
-
由 Alexander Graf 提交于
In case you're wondering what connections exactly you have open or maybe redir'ed in the past, you can't really find out from qemu right now. This patch enables you to see all current connections the host only networking holds open, so you can kill them using the previous patch. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 5月, 2009 1 次提交
-
-
由 Alexander Graf 提交于
Using the new host_net_redir command you can easily create redirections on the fly while your VM is running. While that's great, it's missing the removal of redirections, in case you want to have a port closed again at a later point in time. This patch adds support for removal of redirections. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 08 5月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
This is no user-flippable switch, and no arch makes use of disabling gdbstub support. So it's pointless to keep the related #ifdefs and configure hunks around - and risking breakages like 711c410fdd again. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
-
- 01 5月, 2009 1 次提交
-
-
由 Richard W.M. Jones 提交于
Here is an updated hardware watchdog patch, which should fix everything that was raised about the previous version ... Signed-off-by: NRichard W.M. Jones <rjones@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 4月, 2009 1 次提交
-
-
由 aliguori 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7232 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 22 4月, 2009 5 次提交
-
-
由 aliguori 提交于
adds an "info numa" command to the monitor to output the current topology. Since NUMA is advertised via static ACPI tables, no changes are possible during runtime. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7211 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Allow to establish a TCP/UDP connection redirection also via a monitor command 'host_net_redir'. Moreover, assume TCP as connection type if that parameter is omitted. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
There is nothing x86-specific in host_net_add/remove, so allow them for all targets. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7202 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Fix the documentation of the host_net_add monitor command and allow the user to pass no options at all. Moreover, inform the user on the monitor terminal if a request failed. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch is derived from Tristan Gingold's patch. It adds a new VLAN client type that writes all traffic on the VLAN it is attached to into a pcap file. Such a file can then be analyzed offline with Wireshark or tcpdump. Besides rebasing and some minor cleanups, the major differences to the original version are: - support for enabling/disabling via the monitor (host_net_add/remove) - no special ordering of VLAN client list, qemu_send_packet now takes care of properly ordered packets - 64k default capturing limit (I hate tcpdump's default) Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 19 4月, 2009 1 次提交
-
-
由 blueswir1 提交于
Basically a recursive ":%s/USE_KQEMU/CONFIG_KQEMU/g". Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7189 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 18 4月, 2009 1 次提交
-
-
由 aliguori 提交于
Align some monitor help texts to the related command parameter definitions. host_net_add is skipped intentionally, will be slightly reworked in a separate patch later. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7180 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 08 4月, 2009 1 次提交
-
-
由 pbrook 提交于
Allows distributors to identify their builds without needing to hack the sources. Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7036 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 06 4月, 2009 2 次提交
-
-
由 aurel32 提交于
This replaces a compile time option for some targets and adds this feature to targets which did not have a compile time option. Add monitor command to enable or disable single step mode. Modify monitor command "info status" to display single step mode. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Introduce a more canonical gdbstub configuration (system emulation only) via the new switch '-gdb dev'. Keep '-s' as shorthand for '-gdb tcp::1234'. Use the same syntax also for the corresponding monitor command 'gdbserver'. Its default remains to listen on TCP port 1234. Changes in v4: - Rebased over new command line switches meta file Changes in v3: - Fix documentation Changes in v2: - Support for pipe-based like to gdb (target remote | qemu -gdb stdio) - Properly update the qemu-doc Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 29 3月, 2009 1 次提交
-
-
由 aliguori 提交于
[ Note: depends on char closing fixes ] Properly clean up the gdbstub when the user tries to re-open it (possibly under a different address). Moreover, allow to shut it down from the monitor via 'gdbserver none'. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6913 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 13 3月, 2009 1 次提交
-
-
由 aliguori 提交于
Ported from the KVM tree: Synchronize the qemu cpu state with kvm's before invoking various monitor info commands (like 'info registers'). Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6826 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 09 3月, 2009 1 次提交
-
-
由 blueswir1 提交于
Allow completion of concatenated key strings for the sendkey command. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6784 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 07 3月, 2009 1 次提交
-
-
由 blueswir1 提交于
Fix Sparse warnings: * use NULL instead of plain 0 * rearrange header include order to avoid redefining types accidentally * ANSIfy SLIRP * avoid "restrict" keyword * add static git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
-