The BookE timer code had some written-but-not-read variables. Get rid
of them.
Signed-off-by: NAlexander Graf <agraf@suse.de>

While working on the emulation of the freescale p2010 (e500v2) I realized that
there's no implementation of booke's timers features. Currently mpc8544 uses
ppc_emb (ppc_emb_timers_init) which is close but not exactly like booke (for
example booke uses different SPR).
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When running with PR KVM, we need to set HIOR directly. Thankfully there
is now a new interface to set registers individually so we can just use that
and poke HIOR into the guest vcpu's HIOR register.

While at it, this also sets SDR1 because -M pseries requires it to run.

With this patch, -M pseries works properly with PR KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Update HIOR and generic register get/set.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Removes ABI-breaking HIOR parts - KVM patch to follow.
Signed-off-by: NAlexander Graf <agraf@suse.de>

During the memory API conversion, the indication on little endianness of
MMIO for the heathrow PIC got dropped. This patch adds it back again.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Commit 23c5e4ca (convert to memory API) broke the VIA Cuda emulation layer
by not registering the IO structs.

This patch registers them properly and thus makes -M g3beige and -M mac99
work again.
Tested-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Allow to use ADB in non-ppc macintosh
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The helper function write_IRQreg was always called with a specific argument on
the type of register to access. Inside the function we were simply doing a
switch on that constant argument again. It's a lot easier to just unfold this
into two separate functions and call each individually.
Reported-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The helper function read_IRQreg was always called with a specific argument on
the type of register to access. Inside the function we were simply doing a
switch on that constant argument again. It's a lot easier to just unfold this
into two separate functions and call each individually.
Reported-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The RAM_ADDR_FMT macro hides the type of ram_addr_t so that format
strings can be safely used.  Make sure to use RAM_ADDR_FMT so that the
build works on 32-bit hosts with Xen enabled.  Whether Xen should affect
ppc TCG targets is questionable but a separate issue.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

I introduced this bug in commit 05751d3f (vscsi: always use get_sense,
2011-08-03) because at the time there was no way to expose a sense
condition to SLOF and Linux manages to work around the bug.  However,
the bug becomes evident now that SCSI devices also report unit
attention on reset.

SLOF also has problems dealing with unit attention conditions, so
it still will not boot even with this fix (just like OpenBIOS).
IBM folks are aware of their part of the bug. :-)
Reported-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds support for the H_REMOVE_BULK hypercall on the pseries
machine.  Strictly speaking this isn't necessarym since the kernel will
only attempt to use this if hcall-bulk is advertised in the device tree,
which previously it was not.

Adding this support may give a marginal performance increase, but more
importantly it reduces the differences between the emulated machine and
an existing PowerVM or kvm system, both of which already implement
hcall-bulk.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch implements support for the CFAR SPR on POWER7 (Come From
Address Register), which snapshots the PC value at the time of a branch or
an rfid.  The latest powerpc-next kernel also catches it and can show it in
xmon or in the signal frames.

This works well enough to let recent kernels boot (which otherwise oops
on the CFAR access).  It hasn't been tested enough to be confident that the
CFAR values are actually accurate, but one thing at a time.
Signed-off-by: NBen Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This definition is backward compatible with MAV=1.0 as long as
the guest does not set reserved bits in MAS1/MAS4.

Also, fix the shift in booke206_tlb_to_page_size -- it's the base
that should be able to hold a 4G page size, not the shift count.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Share the TLB array with KVM.  This allows us to set the initial TLB
both on initial boot and reset, is useful for debugging, and could
eventually be used to support migration.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Another round of KVM features, another round of kernel header updates :)
Signed-off-by: NAlexander Graf <agraf@suse.de>

For some time we've had a nicely defined macro with the filename for our
firmware image.  However we didn't actually use it in the place we're
supposed to.  This patch fixes it.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

PAPR systems support several hypercalls intended for use in real mode
debugging tools.  These implement reads and writes to arbitrary guest
physical addresses.  This is useful for real mode software because it
allows access to IO addresses and memory outside the RMA without going
through the somewhat involved process of setting up the hash page table
and enabling translation.

We want these so that when we add real IO devices, the SLOF firmware can
boot from them without having to enter virtual mode.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

In the current emulation of the load-and-reserve (lwarx) and
store-conditional (stwcx.) instructions, the internal reservation
mechanism is taken into account, however each CPU has its own
reservation information and this information is not synchronized between
CPUs to perform proper synchronization.
The following test case with 2 CPUs shows that the semantics of the
"lwarx" and "stwcx." instructions are not preserved by the emulation.
The test case does the following :
	- CPU0: reserve a memory location
	- CPU1: reserve the same memory location
	- CPU0: perform stwcx. on the location
The last store-conditional operation succeeds while it is supposed to
fail since the reservation was supposed to be lost at the second reserve
operation.

This (one line) patch fixes this problem in a very simple manner by
removing the reservation of a CPU every time it is scheduled (in
cpu_exec()). While this is a harsh workaround, it does not affect the
guest code much because reservations are usually held for a very short
time, that is an lwarx is almost always followed by an stwcx. a few
instructions below. Therefore, in most cases, the reservation will be
taken and consumed before a CPU switch occurs. However in the rare case
where a CPU switch does occur between the lwarx and its corresponding
stwcx.  this patch solves a potential erroneous behavior of the
synchronization instructions.
Signed-off-by: NElie Richa <richa@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently our implementation of the H_ENTER hypercall, which inserts a
mapping in the hash page table assumes that only ordinary memory is ever
mapped, and only permits mapping attribute bits accordingly (WIMG==0010).

However, we intend to start adding emulated IO to the pseries platform
(and real IO with PCI passthrough on kvm) which means this simple test
will no longer suffice.

This patch extends the h_enter validation code to check if the given
address is a RAM address.  If it is it enforces WIMG==0010, otherwise
it assumes that it is an IO mapping and instead enforces WIMG=010x.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The interrupt controller presented in the device tree for the pseries
machine is manipulated by the guest only through hypervisor calls.  It
has no real or emulated registers for the guest to access.

However, it currently has a bogus 'reg' property advertising a register
window.  Moreover, this property has an invalid format, being a 32-bit
zero, when the #address-cells property on the root bus indicates that it
needs a 64-bit address.  Since the guest never attempts to manipulate
the node directly, it works, but it is ugly and can cause warnings when
manipulating the device tree in other tools (such as future firmware
versions).

This patch, therefore, corrects the problem by entirely removing the
interrupt-controller node's 'reg' property.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Future devices we will be adding to the pseries machine (e.g. PCI) will
need nodes in the device tree which explicitly reference the top-level
interrupt controller via interrupt-parent or interrupt-map properties.

In order to do this, the interrupt controller node needs an assigned
phandle.  This patch adds the appropriate property, in preparation.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The implementation of the XICS interrupt controller contains several
(difficult to trigger) bugs due to the fact that we were not 100%
consistent with which irq numbering we used.  In most places, global
numbers were used as handled by the presentation layer, however a few
functions took "local" numberings, that is the source number within
the interrupt source controller which is offset from the global
number.  In most cases the function and its caller agreed on this, but
in a few cases it didn't.

This patch cleans this up by always using global numbering.
Translation to the local number is now always and only done when we
look up the individual interrupt source state structure.  This should
remove the existing bugs and with luck reduce the chances of
re-introducing such bugs.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

One of the things we can't fake on PPC is the timer speed. So
we need to extract the frequency information from the host and
put it back into the guest device tree.

Luckily, we already have functions for that from the non-pseries
targets, so all we need to do is to connect the dots and the guest
suddenly gets to know its real timer speeds.
Signed-off-by: NAlexander Graf <agraf@suse.de>

When running PR style KVM, we need to tell the kernel that we want
to run in PAPR mode now. This means that we need to pass some more
register information down and enable papr mode. We also need to align
the HTAB to htab_size boundary.

Using this patch, -M pseries works with kvm even on non-hv kvm
implementations, as long as the preceding kernel patches are in.
Signed-off-by: NAlexander Graf <agraf@suse.de>

---

v1 -> v2:

  - match on CONFIG_PSERIES

v2 -> v3:

  - remove HIOR pieces from PAPR patch (ABI breakage)

This patch updates the kvm kernel headers to the latest version.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We only support -M pseries when certain prerequisites are met, such
as a PPC64 guest and libfdt. To only gather these requirements in
a single place, this patch introduces a new CONFIG_PSERIES variable
that gets set when all prerequisites are met.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Now that we have everything in place, make the machine description
aware of the fact that we can now handle 15 virtual CPUs!
Signed-off-by: NAlexander Graf <agraf@suse.de>

---

v1 -> v2:

  - Max cpus is 15 because of MPIC

With this patch, we generate CPU nodes in the machine initialization, giving
us the freedom to generate as many nodes as we want and as the machine supports,
but only those.

This is a first step towards a much cleaner device tree generation
infrastructure, where we would not require precompiled dtb blobs anymore.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We want to generate the CPU nodes in machine init code, so remove them from
the device tree definition that we precompile.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We currently load a device tree blob and then just take its size x2 to
account for modifications we do inside. While this is nice and great,
it fails when we have a small device tree as blob and lots of nodes added
in machine init code.

So for now, just make it 20k bigger than it was before. We maybe want to
be more clever about this later.
Signed-off-by: NAlexander Graf <agraf@suse.de>

When we screw up and issue an FDT command that doesn't work, we really need to
know immediately and usually can't continue to create the machine. To make sure
we don't need to add error checking in all device tree modification code users,
we can just add the fail checks to the qemu abstract functions.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We want to be able to create subnodes in our device tree, so export it through
the qemu device tree abstraction framework.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The guest OS wants to know where the guest spins, so let's tell him while
updating the CPU nodes with the frequencies anyways.
Signed-off-by: NAlexander Graf <agraf@suse.de>

---

v1 -> v2:

  - use new spin table address

CPUs that are not the boot CPU need to run in spinning code to check if they
should run off to execute and if so where to jump to. This usually happens
by leaving secondary CPUs looping and checking if some variable in memory
changed.

In an environment like Qemu however we can be more clever. We can just export
the spin table the primary CPU modifies as MMIO region that would event based
wake up the respective secondary CPUs. That saves us quite some cycles while
the secondary CPUs are not up yet.

So this patch adds a PV device that simply exports the spinning table into the
guest and thus allows the primary CPU to wake up secondary ones.
Signed-off-by: NAlexander Graf <agraf@suse.de>

---

v1 -> v2:

  - change into MMIO scheme
  - map the secondary NIP instead of 0 1:1
  - only map 64MB for TLB, same as u-boot
  - prepare code for 64-bit spinnings

v2 -> v3:

  - remove r6
  - set MAS2_M
  - map EA 0
  - use second TLB1 entry

v3 -> v4:

  - change to memoryops

v4 -> v5:

  - fix endianness bugs

v5 -> v6:

  - add header

We should only keep CPU nodes in the device tree around that we really have
virtual CPUs for. So remove all superfluous entries that we just keep there
in case someone wants to create a lot of vCPUs.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Now that we can so nicely find out the host's frequencies, we should also
make sure that we get them into all virtual CPUs' device tree nodes.
Signed-off-by: NAlexander Graf <agraf@suse.de>