The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread()
implementation, so a cpu_set_tls() implementation is a no-op.
cpu_clone_regs() was setting the syscall return value in the
wrong register -- it is gpr[11], not gpr[2]. With these two
things fixed, we can compile with NPTL enabled.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

unicore32-linux-user provides cpu_set_tls(), so the failure
to enable target_nptl was presumably an oversight. Enable it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Though threading (target_nptl) was enabled on the base PPC and MIPS
targets, it wasn't enabled for the variants mipsn32, mipsn32el,
mips64, mips64el, ppc64 or ppc46abi32 (probably an oversight).
Enable threading consistently on all these targets.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

For architectures with no linux-user target, don't claim no NPTL
support. This has no behavioural change, but it means that we
won't accidentally add a new linux-user target without threading
support in future (because attempting to do so would be a compile
failure rather than a silent lack of support).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Most targets either (a) support threading or (b) don't have a
linux-user/bsd-user target, so make it default to 'yes', with those
targets that don't support threading having to specifically say so.

This is a mechanical no-behaviour-change commit; some of the
"no" entries it adds will be taken out in later patches.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Implement bdrv_aio_discard for gluster.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use pkg-config to determine the version and library dependency
for GlusterFS block driver.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If the system has GTK but not libvte, it's more helpful to
tell the user that libvte is missing than to simply say that
GTK is not present.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1374162121-31582-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

For bsd-user and linux-user emulation modes QEMU needs to be linked at an
alternate .text segment address, so that it's out of the way of the guest
executable.  Instead of including modified linker scripts for each arch,
just set the address with -Ttext-segment if supported, or by using sed to
edit the default linker script.

Cc: Ed Maste <emaste@freebsd.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Acked-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NEd Maste <emaste@freebsd.org>
Message-id: 1371867016-7660-1-git-send-email-rth@twiddle.net
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang 3.3 with -fsanitize=undefined will fail to link code containing an
int128_t * int128_t multiply (http://llvm.org/bugs/show_bug.cgi?id=16404)
so add this to our configure test for whether [u]int128_t are usable.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

error_exit already prepends "ERROR: ", so no need to print it manually.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

A number of our softmmu targets (PPC, ARM, Microblaze) now more or
less require flattened device tree support for various board models
to work correctly.  Make libfdt mandatory if the target list includes
these, rather than building unhelpful half-functional binaries.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-2-git-send-email-peter.maydell@linaro.org

Currently QEMU provides a local clone of the file libfdt_env.h in
/include. This file is supposed to come with the libfdt package and is
only needed for broken installs of libfdt. Now that we have submodule
dtc, just ignore these broken installs and prompt for the dtc submodule
install instead. QEMU's local libfdt_env.h is removed accordingly.

Manifests as a bug when building QEMU with modern libfdt. The new
version of libfdt does not compile when QEMUs libfdt_env.h takes
precedence over the hosts.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 9b6a3a52e3f46cfbc1ded9ab56385ec045e46705.1369628289.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Just use the TARGET_NAME free string.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1370349928-20419-6-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Everything else needs to match the executable name, which is
TARGET_NAME.

Before:
    $ sh4eb-linux-user/qemu-sh4eb --help
    usage: qemu-sh4 [options] program [arguments...]
    Linux CPU emulator (compiled for sh4 emulation)

After:
    $ sh4eb-linux-user/qemu-sh4eb --help
    usage: qemu-sh4eb [options] program [arguments...]
    Linux CPU emulator (compiled for sh4eb emulation)
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-5-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Do not introduce any new use yet.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-3-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

support compiling on aarch64.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NClaudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 51A5C5ED.90103@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

also put aarch64 in the list of archs that do not need an ldscript.
Signed-off-by: NJani Kokkoken <jani.kokkonen@huawei.com>
Signed-off-by: NClaudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 51AF40EE.1000104@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Nobody uses the CONFIG_ATFILE test now, so just drop it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Tested-by: NClaudio Fontana <claudio.fontana@huawei.com>
Message-id: 1370126121-22975-3-git-send-email-peter.maydell@linaro.org

It hasn't built since FreeBSD 8.x, and is disabled by a patch in the
FreeBSD ports tree.  FreeBSD is migrating to QEMU's libusb support.
Signed-off-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

It was only used in one place (and already expanded in one other).
Signed-off-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

qmp_dump_guest_memory() calls dump_init() and returns an Error when
cpu_get_dump_info() returns an error, as done by the stub.
So there is no need to have a stub for qmp_dump_guest_memory().

Enable the documentation of the always-present dump-guest-memory command.

That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure
completely out of the picture for target CPU features.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

dump.c:dump_init() never checked for the return code anyway.
If paging is not enabled, it will fall back to an identity map.
If paging is enabled and getting memory mapping list is not
implemented, qemu_get_guest_memory_mapping() will return an error.

Since the targets not implementing memory mapping also don't implement
dump support, we will not reach this code today and can worry about
changing cpu_paging_enabled() default when the need arises.

This allows us to drop CONFIG_HAVE_GET_MEMORY_SUPPORT.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.

Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.

E.g. To include vmdk readonly, and others read+write:
    ./configure --target-list=x86_64-softmmu \
                --block-drv-rw-whitelist=qcow2,raw,file,qed \
                --block-drv-ro-whitelist=vmdk
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If the user specifies a target list themselves, check each entry
to make sure it's a target we recognise. This allows us to print
a helpful error message, rather than falling through (where we
would probably eventually end up hitting the uninformative
"ERROR: Unsupported target CPU").
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1369062976-301-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Autogenerate the default target list based on what files exist
in default-configs; this allows us to remove one of the places
that has to be kept up to date with a complete list of every
target we support.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1369062976-301-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The symlink to "asm" platform linux headers is made in the build tree by
the configure script but gcc is not told to look for them there.

The patch fixes this.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

When probing for ncurses, try pkg-config first rather than after
explicit -lncurses and -lcurses.  This fixes static linking in the case
that ncurses has additional dependencies, such as -ltinfo (as on FreeBSD).
Signed-off-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The configure script had some code to manipulate config-host.ld~ (i.e.,
a common backup filename), comparing it with the newly-generated file.
I believe the sense of the comparison was backwards.

Since it seemed to serve little purpose anyway, remove it to avoid any
confusion.
Signed-off-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

We test pkg-config for curses and curl even if those are explicitly
disabled.  Move these tests inside `if "$feature" != "no"' sections.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

... because now we can get the dynamic value with
qemu_get_local_state_pathname().

The only user of the fixed value was the guest agent, which we've moved to
qemu_get_local_state_pathname() in the previous patch.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Remove the OSS support for OpenBSD. The OSS API has not been usable
for quite some time.
Signed-off-by: NBrad Smith <brad@comstyle.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The latest version of MinGW needs a test for __sync_val_compare_and_swap
to fix a missing symbol linker error.
Reported-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Message-id: 1368301619-32097-2-git-send-email-sw@weilnetz.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 7791dba3 broke compilation on MacOSX, because it introduced
a new include of util.h. On MacOSX this includes pwd.h which in turn
includes the system uuid/uuid.h, which causes a compile failure if
QEMU was configured without CONFIG_UUID due to a conflict between
the system header and our fallback versions:
  block/vdi.c:124:20: error: static declaration of 'uuid_generate'
  follows non-static declaration
  static inline void uuid_generate(uuid_t out)
                     ^
  /usr/include/uuid/uuid.h:63:6: note: previous declaration is here
  void uuid_generate(uuid_t out);
       ^

Fix this breakage by improving configure's check for uuid to work on
MacOSX (where there is no need to link in a separate libuuid).

Note that if the user explicitly runs configure with '--disable-uuid'
on MacOSX then QEMU will fail to compile.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1368563799-22755-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Cast debugging can have a substantial cost (20% or more).  Instead of adding
special-cased "fast casts" in the hot paths, we can just disable it in
releases.  The tracing facilities we just added make it easier to analyze
those problems that cast debugging would reveal.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-7-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

For *.img files, there will be a link created directly to the src folder,
like for all other blobs.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The "libtool" binary on MacOSX is not GNU libtool, and doesn't support
anything like the same set of command line options. Test whether we
have accidentally picked this up (by looking for whether it handles
the GNU --version switch), and discard it if so. The fallback machinery
for the "we don't have a libtool" case will work fine. This fixes a
failure in "make install" on MacOSX.
Reported-by: NPeter Cheung <mcheung63@hotmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1367701071-6630-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds a ftrace tracing backend which sends trace event to
ftrace marker file. You can effectively compare qemu trace data and
kernel(especially, kvm.ko when using KVM) trace data.
The ftrace backend is restricted to Linux only.

To try out the ftrace backend:

 $ ./configure --trace-backend=ftrace
 $ make

if you use KVM, enable kvm events in ftrace:

 # sudo echo 1 > /sys/kernel/debug/tracing/events/kvm/enable

After running qemu by root user, you can get the trace:

 # cat /sys/kernel/debug/tracing/trace
Signed-off-by: NEiichi Tsukata <eiichi.tsukata.xh@hitachi.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

openSUSE 12.3 has seccomp.h in /usr/include/libseccomp-1.0.1,
so add `pkg-config --cflags libseccomp` output to QEMU_CFLAGS.

Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>