Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

dprintf is already claimed by POSIX[1], and on at least one system
is implemented as a macro

[1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.htmlSigned-off-by: Nmalc <av1474@comtv.ru>

Compilation for arm (native or cross) results in this
warning:

fpu/softfloat-native.c: In function ‘float64_round_to_int’:
fpu/softfloat-native.c:387: error: control reaches end of non-void function

float64_round_to_int uses special assembler code for arm
and has no explicit return value.

As there is no obvious reason why arm should need special
code, all fpu related conditionals were removed.
The remaining code is standard (C99) and compiles for arm,
too.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Acked-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

There are places, like brcond2, where we know that the destination
of a forward branch will be within 127 bytes.

Add the R_386_PC8 relocation type to support this.  Add a flag to
tcg_out_jxx and tcg_out_brcond* to enable it.  Set the flag in the
brcond2 label_next branches; pass along the input flag otherwise.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add -static to LDFLAGS earlier as to run the compile_prog() tests with
this flags, this will avoid turning on features for which a shared
library is available but not a static one.
Signed-off-by: NLoïc Minier <lool@dooz.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix .rel.plt sections in the output to not only include .rel.plt
sections from the input but also the .rel.iplt sections and to define
the hidden symbols __rel_iplt_start and __rel_iplt_end around
.rel.iplt as otherwise we get undefined references to these when
linking statically to a multilib libc.a.  This fixes the static build
under i386.

Apply similar logic to rela.plt/.iplt and __rela_iplt/_plt_start/_end to
fix the static build under amd64.
Signed-off-by: NLoïc Minier <lool@dooz.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit a0f291fc has enabled
-fstack-protector-all on all targets, as the configure test is bogus.
GCC only emits a warning and not an error if this option is not
supported, so the configure scripts doesn't detect the problem.

This patch changes the configure script to try the various flags
with -Werror in addition to catch the possible warnings.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Remove Thiemo from the maintainers. Requiescat in pace.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In helper.c AREG0 may not correspond do env, so it's not possible to
call cpu_loop_exit() here. Call it from op_helper.c instead.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Access the cp15.c13 TLS registers directly with TCG ops instead of with
a slow helper. If the the cp15 read/write was not TLS register access,
fall back to the cp15 helper.

This makes accessing __thread variables in linux-user when apps are compiled
with -mtp=cp15 possible. legal cp15 register to acces from linux-user are
already checked in cp15_user_ok.

While at it, make the cp15.c13 Thread ID registers available only on
ARMv6K and newer.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>

Qemu may hang in host_signal_handler after qemu has done a
seppuku with cpu_abort(). But at this stage we are not really
interested in target process coredump anymore, so unregister
host_signal_handler to die grafefully.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>

Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>

This patch for linux-user adapts the output of the emulated uname()
syscall to match the configured CPU.  Tested with x86, x86-64 and arm
emulation.
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NLoïc Minier <lool@dooz.org>

The recent transition to always have the DCR helper functions take 32 bit
values broke the PPC64 target, as target_long became 64 bits there.

This patch changes DCR helpers to target_long arguments, and cast the values
to 32 bit when needed.

Fixes PPC64 build with --enable-debug-tcg

Based on a patch from Alexander Graf <agraf@suse.de>
Reported-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

It is very handy to have a reliable mapping of a condition to its inverse.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Defines setcond_{i32,i64} and setcond2_i32 for 64-on-32-bit.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The internal opcodes brcond2, add2, sub2, mulu2 were undocumented.
Place these in a new section that clearly indicates that they are
not to be emitted by translators.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The WLAN USB stick ZyXEL NWD271N (0586:3417) uses very large
usb control transfers of more than 2048 bytes which won't fit
into the buffer of the ctrl_struct. This results in an error message
"husb: ctrl buffer too small" and a non-working device.
Increasing the buffer size to 8192 seems to be a safe choice.
Signed-off-by: NChristian Krause <chkr@plauener.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When several PCI bridges were in use, monitor command "info pci" would
enter into infinite loop. Buses behind the bridge were not discoverable
because secondary and subordinate bus numbers were not used properly.
Other buses were not found because bus search terminated on first miss.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It's currently not used by PPC machines. Refactor so that also Sparc64
machines can use it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

to= is handled in qemu-sockets.c inet_listen.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This one is for 0.12 too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This provides the same information as reverted commit 2ba6edf0.  Not
much, just better than nothing.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While there, use "property" rather than "option", for consistency with
-global.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Option "-device DRIVER,?" and monitor command "device_add DRIVER,?"
print the supported properties instead of creating a device.  The
former also terminates the program.

This is commit 2ba6edf0 (just reverted) done right.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 2ba6edf0.

The commit has two issues:

* When it runs from the monitor, e.g. "device_add e1000,?", it prints
  to stderr instead of the monitor.

* Help looks to callers just like failed device creation.  This makes
  main() exit unsuccessfully on "-device e1000,?".

We need to do this differently.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 922910ce.

The commit has four issues:

* When it runs from the monitor, e.g. "device_add e1000,mac=?", it
  prints to stderr instead of the monitor.

* Help looks to callers just like failed device creation.  This makes
  main() exit unsuccessfully on "-device e1000,mac=?".

* It has an undocumented side effect on -global: "-global e1000.mac=?"
  prints help, but only when we actually add an e1000 device.

* It does not work for properties that accept the value "?".

We need to do this differently.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Help was shoehorned into device creation, qdev_device_add().  Since
help doesn't create a device, it returns NULL, which looks to callers
just like failed device creation.  Monitor handler do_device_add()
doesn't care, but main() exits unsuccessfully.

Move help out of device creation, into new qdev_device_help().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>