Hence, freeing a RAMBlock has to be switched to call_rcu.
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This simplifies calling g_free from an RCU callback.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add RCU-enabled variants on the existing bsd DQ facility. Each
operation has the same interface as the existing (non-RCU)
version. Also, each operation is implemented as macro.

Using the RCU-enabled QLIST, existing QLIST users will be able to
convert to RCU without using a different list interface.
Signed-off-by: NMike Day <ncmike@ncultra.org>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Note that even after this patch, most callers of address_space_*
functions must still be under the big QEMU lock, otherwise the memory
region returned by address_space_translate can disappear as soon as
address_space_translate returns.  This will be fixed in the next part
of this series.
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After the previous patch, TLBs will be flushed on every change to
the memory mapping.  This patch augments that with synchronization
of the MemoryRegionSections referred to in the iotlb array.

With this change, it is guaranteed that iotlb_to_region will access
the correct memory map, even once the TLB will be accessed outside
the BQL.
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This for now is a simple TLB flush.  This can change later for two
reasons:

1) an AddressSpaceDispatch will be cached in the CPUState object

2) it will not be possible to do tlb_flush once the TCG-generated code
runs outside the BQL.
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that objects actually obey the rules, document them.
Reviewed-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

object_unparent should not be called until the parent device is going to be
destroyed.  Only remove the capability and do memory_region_del_subregion
at unrealize time.  Freeing the data structures is left in shpc_free, to
be called from the instance_finalize callback.
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This memory leak was introduced inadvertently by omitting object_unparent.
A better fix is to use the new memory_region_set_size instead of destroying
and recreating the MMIO region on the fly.

Also, ensure that unmapping and remapping the region is done atomically.
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This fixes a use-after-free if do_address_space_destroy is executed
too late.
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This needs to go away sooner or later, but one complication is the
complex VFIO data structures that are modified in instance_finalize.
Take a shortcut for now.
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Always process them within a short time.  Even though waiting a little
is useful, it is not okay to delay e.g. qemu_opts_del forever.
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

At present, the target is valued boot_tpgt, In addition,
channel and lun both are 0 for bootable vhost-scsi device.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NBo Su <subo7@huawei.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Because Qemu only accept an wwpn argument for vhost-scsi, we
cannot assign a tpgt. That's say tpg is transparent for Qemu, Qemu
doesn't know which tpg can boot, but vhost-scsi driver module
doesn't know too for one assigned wwpn.

At present, we assume that the first tpg can boot only, and add
a boot_tpgt property that defaults to 0. Of course, people can
pass a valid value by qemu command line.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In the way, we can make the bootindex property take effect.
At the meanwhile, the firmware path name of vhost-scsi is
"channel@channel/vhost-scsi@target,lun".
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

commit 6b1566cb (qdev: Introduce FWPathProvider interface) did a
good job for supproting to get firmware path on some different
architectures.

Moreover further more, we can use the interface to get firmware
path name for a device which isn't attached a specific bus,
such as virtio-bus, scsi-bus etc.

When the device (such as vhost-scsi) realize the TYPE_FW_PATH_PROVIDER
interface, we should introduce a new function to get the correct firmware
path name for it.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch defines the list of kvm_exit reasons for aarch64. This list is
based on the Exception Class (EC) field of HSR register. With this patch
users can trace the execution of guest VMs better. A sample output from
command "kvm_stat -1 -t" is shown as the following:
<...>
kvm_exit(WATCHPT_HYP)          0         0
kvm_exit(WFI)               9422      9361

NOTE: This patch requires TRACE_EVENT(kvm_exit) to include exit_reason
field in TP_ARGS. A patch to upstream kernel has been submitted.
Signed-off-by: NWei Huang <wei@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This fixes a compiler error which occurs if DEBUG_VFIO is defined.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

The difference between v1 and v2 is fairly subtle, simply more
deterministic behavior for unmaps.  The v1 interface allows the user
to attempt to unmap sub-regions of previous mappings, returning
success with zero size if unable to comply.  This was a reflection of
the underlying IOMMU API.  The v2 interface requires that the user
may only unmap fully contained mappings, ie. an unmap cannot intersect
or bisect a previous mapping, but may cover multiple mappings.  QEMU
never made use of the sub-region v1 support anyway, so we can support
either v1 or v2.  We'll favor v2 since it's newer.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

In the case of VFIO, the unrealize callback is too early to munmap the
BARs.  The munmap must be delayed until memory accesses are complete.
To do this, split vfio_unmap_bars in two.  The removal step, now called
vfio_unregister_bars, remains in vfio_exitfn.  The reclamation step
is vfio_unmap_bars and is moved to the instance_finalize callback.

Similarly, quirk MemoryRegions have to be removed during
vfio_unregister_bars, but freeing the data structure must be delayed
to vfio_unmap_bars.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

In order to enable out-of-BQL address space lookup, destruction of
devices needs to be split in two phases.

Unrealize is the first phase; once it complete no new accesses will
be started, but there may still be pending memory accesses can still
be completed.

The second part is freeing the device, which only happens once all memory
accesses are complete.  At this point the reference count has dropped to
zero, an RCU grace period must have completed (because the RCU-protected
FlatViews hold a reference to the device via memory_region_ref).  This is
when instance_finalize is called.

Freeing data belongs in an instance_finalize callback, because the
dynamically allocated memory can still be used after unrealize by the
pending memory accesses.

This starts the process by creating an instance_finalize callback and
freeing most of the dynamically-allocated data in instance_finalize.
Because instance_finalize is also called on error paths or also when
the device is actually not realized, the common code needs some changes
to be ready for this.  The error path in vfio_initfn can be simplified too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Now that vfio_put_base_device is called unconditionally at instance_finalize
time, it can be called twice if vfio_populate_device fails.  This works
but it is slightly harder to follow.

Change vfio_get_device to not touch the vbasedev struct until it will
definitely succeed, moving the vfio_populate_device call back to vfio-pci.
This way, vfio_put_base_device will only be called once.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

address_space_destroy_dispatch is called from an RCU callback and hence
outside the iothread mutex (BQL).  However, after address_space_destroy
no new accesses can hit the destroyed AddressSpace so it is not necessary
to observe changes to the memory map.  Move the memory_listener_unregister
call earlier, to make it thread-safe again.
Reported-by: NAlex Williamson <alex.williamson@redhat.com>
Fixes: 374f2981Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Expand out and remove the STATUS macro.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Expand out and remove the STATUS_VAR macro.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Expand out STATUS_PARAM wherever it is used and delete the definition.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

# gpg: Signature made Fri 06 Feb 2015 14:10:40 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  monitor: more accurate completion for host_net_remove()
  net: del hub port when peer is deleted
  net: remove the wrong comment in net_init_hubport()
  monitor: print hub port name during info network
  rtl8139: simplify timer logic
  MAINTAINERS: add Jason Wang as net subsystem maintainer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Current completion for host_net_remove will show hub ports and clients
that were not peered with hub ports. Fix this.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-4-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We should del hub port when peer is deleted since it will not be reused
and will only be freed during exit.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-3-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Not only nic could be the one to peer.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-2-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-1-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Pavel Dovgalyuk reports that TimerExpire and the timer are not restored
correctly on the receiving end of migration.

It is not clear to me whether this is really the case, but we can take
the occasion to get rid of the complicated code that computes PCSTimeout
on the fly upon changes to IntrStatus/IntrMask.  Just always keep a
timer running, it will fire every ~130 seconds at most if the interrupt
is masked with TimerInt != 0.

This makes rtl8139_set_next_tctr_time idempotent (when the virtual clock
is stopped between two calls, as is the case during migration).

Tested with Frediano's qtest.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1421765099-26190-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

# gpg: Signature made Fri 06 Feb 2015 13:45:06 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  trace: Print PID and time in stderr traces
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When debugging migration it's useful to know the PID of
each trace message so you can figure out if it came from the source
or the destination.

Printing the time makes it easy to do latency measurements or timings
between trace points.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1421746875-9962-1-git-send-email-dgilbert@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

migration/next for 20150205

# gpg: Signature made Thu 05 Feb 2015 16:17:08 GMT using RSA key ID 5872D723
# gpg: Can't check signature: public key not found

* remotes/juanquintela/tags/migration/20150205:
  fix mc146818rtc wrong subsection name to avoid vmstate_subsection_load() fail
  Tracify migration/rdma.c
  Add migration stream analyzation script
  migration: Append JSON description of migration stream
  qemu-file: Add fast ftell code path
  QJSON: Add JSON writer
  Print errors in some of the early migration failure cases.
  Migration: Add lots of trace events
  savevm: Convert fprintf to error_report
  vmstate-static-checker: update whitelist
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

coverity: Improve and extend model

# gpg: Signature made Thu 05 Feb 2015 16:20:49 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-cov-model-2015-02-05:
  MAINTAINERS: Add myself as Coverity model maintainer
  coverity: Model g_free() isn't necessarily free()
  coverity: Model GLib string allocation partially
  coverity: Improve model for GLib memory allocation
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

fix mc146818rtc wrong subsection name to avoid vmstate_subsection_load() fail
during incoming migration or loadvm.
Signed-off-by: NZhang Haoyu <zhanghy@sangfor.com.cn>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Turn all the D/DD/DDDPRINTFs into trace events
Turn most of the fprintf(stderr, into error_report
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>