global_qtest is not really required here, since boot_sector_test()
is already independent from that global variable.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

global_qtest is only needed here for one readl(). Let's replace it
with qtest_readl() and we can remove the global_qtest variable here.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Apart from using qmp() in one spot, this test does not have any
dependencies to the global_qtest variable, so we can simply get
rid of it here by replacing the qmp() with qtest_qmp().
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Apart from using qmp() in the qmp_discard_response() macro, these
tests do not have any dependencies to the global_qtest variable,
so we can simply get rid of it here by replacing the qmp() with
qtest_qmp() in the macro.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

The test does not use any of the functions that require global_qtest,
so we can simply get rid of this global variable here.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

We want to get rid of global_qtest in the long run, thus do not
use the wrappers like inb() and outb() here anymore.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

The biggest part has already been done in the previous patch, we now
only have to replace some few qmp() and readb() calls with the
corresponding qtest_*() functions to get there.
Acked-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

As a general rule, we prefer avoiding implicit global state
because it makes code harder to safely copy and paste without
thinking about the global state.  Adjust the helper code to
use explicit state instead, and update all callers.

bios-tables-test no longer depends on global_qtest, now that it
passes explicit state through the testsuite data; an assert
proves this fact (although we will get rid of it later, once
global_qtest is gone).
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
[thuth: adapted patch to current master branch]
Signed-off-by: NThomas Huth <thuth@redhat.com>

Managing parallel connections to two different monitors via
the implicit global_qtest makes it hard to copy-and-paste code
to tests that are not aware of the implicit state.  Since we
have already fixed qpci to avoid global_qtest, we can now
simplify by not using global_qtest anywhere in ivshmem-test.

We can assert that the conversion is correct by checking that
global_qtest remains NULL throughout the test (a later patch
that changes global_qtest to not be a public global variable
will drop the assertions).
Signed-off-by: NEric Blake <eblake@redhat.com>
[thuth: Dropped the changes to test_ivshmem_hotplug() - will be fixed later]
Signed-off-by: NThomas Huth <thuth@redhat.com>

QPCIBus already tracks QTestState, so use that state instead of an
implicit reliance on global_qtest.

Based on an earlier patch ("libqos: Use explicit QTestState for pci
operations") from Eric Blake.
Signed-off-by: NThomas Huth <thuth@redhat.com>

The pkg.mxe.cc package repositories have been down for the last two
weeks causing the builds to fail when shippable re-builds the
containers.

This is really just a sticking plaster until we can get our own docker
hub images properly setup so we can avoid having dependencies on
external repos.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Acked-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181214151718.5041-1-alex.bennee@linaro.org
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

miscellaneous patches:
 * checkpatch.pl: Enforce multiline comment syntax
 * Rename cpu_physical_memory_write_rom() to address_space_write_rom()
 * disas, monitor, elf_ops: Use address_space_read() to read memory
 * Remove load_image() in favour of load_image_size()
 * Fix some minor memory leaks in arm boards/devices
 * virt: fix broken indentation

# gpg: Signature made Fri 14 Dec 2018 14:41:20 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-misc-20181214: (22 commits)
  virt: Fix broken indentation
  target/arm: Create timers in realize, not init
  tests/test-arm-mptimer: Don't leak string memory
  hw/sd/sdhci: Don't leak memory region in sdhci_sysbus_realize()
  hw/arm/mps2-tz.c: Free mscname string in make_dma()
  target/arm: Free name string in ARMCPRegInfo hashtable entries
  include/hw/loader.h: Document load_image_size()
  hw/core/loader.c: Remove load_image()
  device_tree.c: Don't use load_image()
  hw/block/tc58128.c: Don't use load_image()
  hw/i386/multiboot.c: Don't use load_image()
  hw/i386/pc.c: Don't use load_image()
  hw/pci/pci.c: Don't use load_image()
  hw/smbios/smbios.c: Don't use load_image()
  hw/ppc/ppc405_boards: Don't use load_image()
  hw/ppc/mac_newworld, mac_oldworld: Don't use load_image()
  elf_ops.h: Use address_space_write() to write memory
  monitor: Use address_space_read() to read memory
  disas.c: Use address_space_read() to read memory
  Rename cpu_physical_memory_write_rom() to address_space_write_rom()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block layer patches:

- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)

# gpg: Signature made Fri 14 Dec 2018 10:55:09 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (42 commits)
  block/mirror: add missing coroutine_fn annotations
  iotests: make 235 work on s390 (and others)
  block: Assert that flags are up-to-date in bdrv_reopen_prepare()
  block: Remove assertions from update_flags_from_options()
  block: Stop passing flags to bdrv_reopen_queue_child()
  block: Remove flags parameter from bdrv_reopen_queue()
  block: Clean up reopen_backing_file() in block/replication.c
  qemu-io: Put flag changes in the options QDict in reopen_f()
  block: Drop bdrv_reopen()
  block: Use bdrv_reopen_set_read_only() in the mirror driver
  block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
  block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
  block: Use bdrv_reopen_set_read_only() in stream_start/complete()
  block: Use bdrv_reopen_set_read_only() in bdrv_commit()
  block: Use bdrv_reopen_set_read_only() in commit_start/complete()
  block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename()
  block: Add bdrv_reopen_set_read_only()
  file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL
  file-posix: Switch to .bdrv_co_ioctl
  file-posix: Remove paio_submit_co()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: fixes for mtp, ehci, usb-host and pvusb (xen).

# gpg: Signature made Fri 14 Dec 2018 10:38:33 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20181214-pull-request:
  usb-mtp: Limit filename to object information size
  usb-mtp: use O_NOFOLLOW and O_CLOEXEC.
  ehci: fix fetch qtd race
  usb-host: reset and close libusb_device_handle before qemu exit
  pvusb: set max grants only in initialise
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QAPI patches for 2018-12-13

# gpg: Signature made Fri 14 Dec 2018 05:53:51 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2018-12-13-v2: (32 commits)
  qapi: add conditions to REPLICATION type/commands on the schema
  qapi: add more conditions to SPICE
  qapi: add condition to variants documentation
  qapi: add 'If:' condition to struct members documentation
  qapi: add 'If:' condition to enum values documentation
  qapi: Add #if conditions to generated code members
  qapi: add 'if' to alternate members
  qapi: add 'if' to union members
  qapi: Add 'if' to implicit struct members
  qapi: add a dictionary form for TYPE
  qapi-events: add 'if' condition to implicit event enum
  qapi: add 'if' to enum members
  qapi: add a dictionary form with 'name' key for enum members
  qapi: improve reporting of unknown or missing keys
  qapi: factor out checking for keys
  tests: print enum type members more like object type members
  qapi: change enum visitor and gen_enum* to take QAPISchemaMember
  qapi: Do not define enumeration value explicitly
  qapi: break long lines at 'data' member
  qapi: rename QAPISchemaEnumType.values to .members
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Most notable change in this PR is the full removal of the "handle" fsdev
backend.

# gpg: Signature made Wed 12 Dec 2018 13:20:42 GMT
# gpg:                using RSA key 71D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg:                 aka "Gregory Kurz <gregory.kurz@free.fr>"
# gpg:                 aka "[jpeg image of size 3330]"
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3  4910 71D4 D5E5 822F 73D6

* remotes/gkurz/tags/for-upstream:
  9p: remove support for the "handle" backend
  xen/9pfs: use g_new(T, n) instead of g_malloc(sizeof(T) * n)
  9p: use g_new(T, n) instead of g_malloc(sizeof(T) * n)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * Convert various devices from sysbus init to instance_init
 * Remove the now unused sysbus init support entirely
 * Allow AArch64 processors to boot from a kernel placed over 4GB
 * hw: arm: musicpal: drop TYPE_WM8750 in object_property_set_link()
 * versal: minor fixes to virtio-mmio instantation
 * arm: Implement the ARMv8.1-HPD extension
 * arm: Implement the ARMv8.2-AA32HPD extension
 * arm: Implement the ARMv8.1-LOR extension (as the trivial
   "no limited ordering regions provided" minimum)

# gpg: Signature made Thu 13 Dec 2018 14:52:25 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20181213: (37 commits)
  target/arm: Implement the ARMv8.1-LOR extension
  target/arm: Use arm_hcr_el2_eff more places
  target/arm: Introduce arm_hcr_el2_eff
  target/arm: Implement the ARMv8.2-AA32HPD extension
  target/arm: Implement the ARMv8.1-HPD extension
  target/arm: Tidy scr_write
  target/arm: Fix HCR_EL2.TGE check in arm_phys_excp_target_el
  target/arm: Add SCR_EL3 bits up to ARMv8.5
  target/arm: Add HCR_EL2 bits up to ARMv8.5
  target/arm: Move id_aa64mmfr* to ARMISARegisters
  hw/arm: versal: Correct the nr of IRQs to 192
  hw/arm: versal: Use IRQs 111 - 118 for virtio-mmio
  hw/arm: versal: Reduce number of virtio-mmio instances
  hw/arm: versal: Remove bogus virtio-mmio creation
  core/sysbus: remove the SysBusDeviceClass::init path
  xen_backend: remove xen_sysdev_init() function
  usb/tusb6010: Convert sysbus init function to realize function
  timer/puv3_ost: Convert sysbus init function to realize function
  timer/grlib_gptimer: Convert sysbus init function to realize function
  timer/etraxfs_timer: Convert sysbus init function to realize function
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

I introduced indentation using tabs instead of spaces in another
commit.  Peter reported the problem, and I failed to fix that
before sending my pull request.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181212003147.29604-1-ehabkost@redhat.com
Fixes: 95159760 ("virt: Eliminate separate instance_init functions")
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The timer_new() function allocates memory; this means that
if we call it in the CPU's init method we would need
to provide an instance_finalize method to free it. Defer
the timer creation to the realize function instead.

This fixes a memory leak spotted by clang LeakSanitizer
when a CPU object is created for introspection.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181204132952.2601-6-peter.maydell@linaro.org

The test-arm-mptimer setup creates a lot of test names using
g_strdup_printf() and never frees them. This is entirely
harmless since it's one-shot test code, but it clutters
up the output from clang's LeakSanitizer. Refactor to
use a helper function so we can free the memory.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181204132952.2601-5-peter.maydell@linaro.org

In sdhci_sysbus_realize() we override the initialization of
s->iomem that sdhci_common_realize() performs. However we
don't destroy the old memory region before reinitializing
it, which means that the memory allocated for mr->name in
memory_region_do_init() is leaked.

Since sdhci_initfn() already initializes s->io_ops to
&sdhci_mmio_ops, always use that in sdhci_common_realize()
and remove the now-unnecessary reinitialization of the
MMIO region from sdhci_sysbus_realize().

Spotted by clang's leak sanitizer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181204132952.2601-4-peter.maydell@linaro.org

The clang leak sanitizer spots a (one-off, trivial) memory
leak in make_dma() due to a missing free.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181204132952.2601-3-peter.maydell@linaro.org

When we add a new entry to the ARMCPRegInfo hash table in
add_cpreg_to_hashtable(), we allocate memory for tehe
ARMCPRegInfo struct itself, and we also g_strdup() the
name string. So the hashtable's value destructor function
must free the name string as well as the struct.

Spotted by clang's leak sanitizer. The leak here is a
small one-off leak at startup, because we don't support
CPU hotplug, and so the only time when we destroy
hash table entries is for the case where ARM_CP_OVERRIDE
means we register a wildcard entry and then override it later.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181204132952.2601-2-peter.maydell@linaro.org

Add a documentation comment for load_image_size().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-11-peter.maydell@linaro.org

The load_image() function is now no longer used anywhere, so
we can remove it completely. (Use load_image_size() or
g_file_get_contents() instead.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-10-peter.maydell@linaro.org

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-9-peter.maydell@linaro.org

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-8-peter.maydell@linaro.org

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().

While we are converting the code, add the missing error check.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-7-peter.maydell@linaro.org

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Use the glib g_file_get_contents() function instead, which does
the whole "allocate memory for the file and read it in" operation.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-6-peter.maydell@linaro.org

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().

While we are converting this code, add an error-check
for read failure.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-5-peter.maydell@linaro.org

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-4-peter.maydell@linaro.org

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Message-id: 20181130151712.2312-3-peter.maydell@linaro.org

The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Use the glib g_file_get_contents() function instead, which does
the whole "allocate memory for the file and read it in" operation.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Message-id: 20181130151712.2312-2-peter.maydell@linaro.org

Currently the load_elf function in elf_ops.h uses
cpu_physical_memory_write() to write the ELF file to
memory if it is not handling it as a ROM blob. This
means we ignore the AddressSpace that the function
is passed to define where it should be loaded.
Use address_space_write() instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181122172653.3413-4-peter.maydell@linaro.org

Currently monitor.c reads physical memory using
cpu_physical_memory_read(). This effectively hard-codes
assuming that all CPUs have the same view of physical
memory. Switch to address_space_read() instead, which
lets us use the AddressSpace for the CPU we're
reading memory for (falling back to address_space_memory
if there is no CPU, as happens with the "none" board).
As a bonus, this allows us to detect failures to read memory.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181122172653.3413-3-peter.maydell@linaro.org

Currently disas.c reads physical memory using
cpu_physical_memory_read(). This effectively hard-codes
assuming that all CPUs have the same view of physical
memory. Switch to address_space_read() instead, which
lets us use the AddressSpace for the CPU we're
disassembling for.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181122172653.3413-2-peter.maydell@linaro.org

The API of cpu_physical_memory_write_rom() is odd, because it
takes an AddressSpace, unlike all the other cpu_physical_memory_*
access functions. Rename it to address_space_write_rom(), and
bring its API into line with address_space_write().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 20181122133507.30950-3-peter.maydell@linaro.org

Rename cpu_physical_memory_write_rom_internal() to
address_space_write_rom_internal(), and make it take
MemTxAttrs and return a MemTxResult. This brings its
API into line with address_space_write().

This is an internal function to exec.c; fixing its API
will allow us to change the global function
cpu_physical_memory_write_rom().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 20181122133507.30950-2-peter.maydell@linaro.org

We now require Linux-kernel-style multiline comments:
    /*
     * line one
     * line two
     */

Enforce this in checkpatch.pl, by backporting the relevant
parts of the Linux kernel's checkpatch.pl. (The only changes
needed are that Linux's checkpatch.pl WARN() function takes
an extra argument that ours does not, and the kernel has a
special case for networking code we don't want.)"

The kernel's checkpatch does not enforce "leading /* on
a line of its own, so that part is unique to QEMU's checkpatch.

Sample warning output:

WARNING: Block comments use a leading /* on a separate line
#34: FILE: hw/intc/arm_gicv3_common.c:39:
+    /* Older versions of QEMU had a bug in the handling of state save/restore
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Marking a function coroutine_fn currently has no effect on the compiler,
but it documents that this function must be called from coroutine
context and it may yield.  This is important information for the
programmer.

Also, if we ever transition to a stackless coroutine implementation,
then it's likely that the annotation will become mandatory so the
compiler can use the correct calling convention for coroutine functions.

Cc: Max Reitz <mreitz@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>