Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Allow the user to override the firmware file name rather than always
using "slof.bin".
Reported-by: NDinar Valeev <k0da@opensuse.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The function returned a target_ulong which was made from unnamed enum
values. The target_ulong was then assigned to an int variable which
was used in a switch statement.

Using a named enum in both cases makes reviews easier.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

i686-w64-mingw32-gcc (GCC) 4.6.3 from Debian wheezy reports these warnings:

hw/ppc/spapr_hcall.c:188:1: warning:
 control reaches end of non-void function [-Wreturn-type]

hw/ppc/spapr_pci.c:454:1: warning:
 control reaches end of non-void function [-Wreturn-type]

Both warnings are fixed by using g_assert_not_reached instead of assert.
A second line with assert(0) in spapr_pci.c which did not raise a compiler
warning was modified, too, because g_assert_not_reached documents the
purpose of that statement and is not removed in release builds.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

MPC86xx processors are based on the e600 core, which is not the case
in qemu where it is based on the 7400 processor.

This patch creates the e600 core and instantiates the MPC86xx
processors based on it. Therefore, adding the high BATs, the SPRG
4..7 registers, which are e600-specific [1], and a HW MMU model (as 7400).
This allows to define the MPC8610 processor too.

Tested with a kernel using the HW TLB misses.

[1] http://cache.freescale.com/files/32bit/doc/ref_manual/E600CORERM.pdfSigned-off-by: NJulio Guerra <guerr@julio.in>
Signed-off-by: NAlexander Graf <agraf@suse.de>

# By Kevin Wolf (4) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
  add timestamp to error_report()
  qapi-schema: Use existing type for drive-backup arguments
  qapi-schema: Use BlockdevSnapshot type for blockdev-snapshot-sync
  qapi.py: Allow top-level type reference for command definitions
  qapi.py: Avoid code duplication
  qemu-char: Fix ringbuf option size

Message-id: 1373478767-20965-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.

In this case, we often need to know when the problem happens.

But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.

[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: NSeiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We don't have to duplicate the definition any more now that we may refer
to a type instead.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

If 'data' for a command definition isn't a dict, but a string, it is
taken as a (struct) type name and the fields of this struct are directly
used as parameters.

This is useful for transactionable commands that can use the same type
definition for both the transaction action and the arguments of the
standalone command.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The code that interprets the read JSON expression and appends types to
the respective global variables was duplicated. We can avoid that by
splitting off the part that reads from the file.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Any attempt to use it trips an "opt->desc->type == QEMU_OPT_NUMBER"
assertion.  Broken in commit 1da48c65.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

QOM CPUState refactorings

* Fix for OpenRISCCPU subclasses
* Fix for gdbstub CPU selection
* Move linux-user CPU functions into new header
* CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al.
* Fix some targets to consistently inline TCG code generation
* Centrally log CPU reset

# gpg: Signature made Wed 10 Jul 2013 07:52:39 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (41) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (43 commits)
  cpu: Move reset logging to CPUState
  target-ppc: Change LOG_MMU_STATE() argument to CPUState
  target-i386: Change LOG_PCALL_STATE() argument to CPUState
  log: Change log_cpu_state[_mask]() argument to CPUState
  target-i386: Change do_smm_enter() argument to X86CPU
  target-i386: Change do_interrupt_all() argument to X86CPU
  target-xtensa: Change gen_intermediate_code_internal() arg to XtensaCPU
  target-unicore32: Change gen_intermediate_code_internal() signature
  target-sparc: Change gen_intermediate_code_internal() argument to SPARCCPU
  target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPU
  target-s390x: Change gen_intermediate_code_internal() argument to S390CPU
  target-ppc: Change gen_intermediate_code_internal() argument to PowerPCCPU
  target-mips: Change gen_intermediate_code_internal() argument to MIPSCPU
  target-microblaze: Change gen_intermediate_code_internal() argument types
  target-m68k: Change gen_intermediate_code_internal() argument to M68kCPU
  target-lm32: Change gen_intermediate_code_internal() argument to LM32CPU
  target-i386: Change gen_intermediate_code_internal() argument to X86CPU
  target-cris: Change gen_intermediate_code_internal() argument to CRISCPU
  target-arm: Change gen_intermediate_code_internal() argument to ARMCPU
  target-alpha: Change gen_intermediate_code_internal() argument to AlphaCPU
  ...

# By Andreas Schwab (2) and others
# Via Riku Voipio
* riku/linux-user-for-upstream:
  linux-user: Do not ignore mmap failure from host
  linux-user: improve target_to_host_sock_type conversion
  user-exec.c: Set is_write correctly in the ARM cpu_signal_handler()
  linux-user: Fix sys_utimensat (would not compile on old glibc)
  linux-user: fix signal number range check
  linux-user: add SIOCADDRT/SIOCDELRT support
  linux-user: handle /proc/$$ like /proc/self

Message-id: cover.1373051589.git.riku.voipio@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Richard Henderson
# Via Richard Henderson
* rth/tcg-next:
  tcg-arm: Implement tcg_register_jit
  tcg-i386: Use QEMU_BUILD_BUG_ON instead of assert for frame size
  tcg: Move the CIE and FDE header definitions to common code
  tcg: Fix high_pc fields in .debug_info
  tcg-arm: Use AT_PLATFORM to detect the host ISA
  tcg-arm: Simplify logic in detecting the ARM ISA in use
  tcg-arm: Rename use_armv5_instructions to use_armvt5_instructions
  tcg-arm: Make use of conditional availability of opcodes for divide
  tcg: Simplify logic using TCG_OPF_NOT_PRESENT
  tcg: Allow non-constant control macros
  tcg-ppc64: Don't implement rem
  tcg-ppc: Don't implement rem
  tcg-arm: Don't implement rem
  tcg: Split rem requirement from div requirement
  tcg: Add myself to general TCG maintainership

Message-id: 1373379515-28596-1-git-send-email-rth@twiddle.net
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Its clear from the implementation that class casting is supposed to work
with a NULL class argument. Guard all dereferences of the class argument
against NULL accordingly.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 94cd5ba46b74eea289a7e582635820c1c54e66fa.1371546907.git.peter.crosthwaite@xilinx.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.

This adds reset logging for alpha, unicore32 and xtensa.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Choose CPUState rather than PowerPCCPU since doing a CPU() cast on the
macro argument would hide type mismatches.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Since log_cpu_state_mask() argument was changed to CPUState,
CPUArchState is no longer needed.

Choose CPUState rather than X86CPU to not hide type mismatches with CPU().
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Since commit 878096ee (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.

Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Prepares for log_cpu_state_mask() changing argument to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Prepares for log_cpu_state() changing argument to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Use UniCore32CPU and bool.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Use MicroBlazeCPU and bool.

Prepares for changing log_cpu_state() argument to CPUState and for
moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool type while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also use bool argument while at it.

Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Cc: qemu-stable@nongnu.org
Reported-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Cc: qemu-stable@nongnu.org
Reported-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Cc: qemu-stable@nongnu.org
Reported-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Cc: qemu-stable@nongnu.org
Reported-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Acked-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NAndreas Färber <afaerber@suse.de>