spapr_pci.c contains a number of expressions of the form (uval == -1) or
(uval != -1), where 'uval' is an unsigned value.

This mostly works in practice, because as long as the width of uval is
greater or equal than that of (int), the -1 will be promoted to the
unsigned type, which is the expected outcome.

However, at least for the cases where uval is uint32_t, this would break
on platforms where sizeof(int) > 4 (and a few such do exist), because then
the uint32_t value would be promoted to the larger int type, and never be
equal to -1.

This patch fixes these errors.  The fixes for the (uint32_t) cases are
necessary as described above.  I've made similar fixes to (uint64_t) and
(hwaddr) cases.  Those are strictly theoretical, since I don't know of any
platforms where sizeof(int) > 8, but hey, it's not that hard so we might
as well be strictly C standard compliant.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Some recent patches require a function from libfdt version 1.4.0,
so we should check for this version during the configure step
already. Unfortunately, there does not seem to be a proper #define
for the version number in the libfdt headers. So alternatively,
we check for the availability of the required function
fdt_get_property_by_offset() instead instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since some recent patches require libfdt version 1.4.0,
let's update the dtc submodule to this version.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Convert device models "macio-oldworld" and "macio-newworld".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This fixes a compile warning from clang 3.5 (the assertion
could never fire).
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
[PMM: added note in commit message that this is fixing a build warning]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio-input: two small fixups

# gpg: Signature made Tue Jun  2 09:32:51 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-20150602-1:
  virtio-input: make virtio devices follow usual naming convention
  virtio-input: const_le16 and const_le32 not build time constant
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pc build fix

My last pull breaks build on systems with iasl.
Fix this up.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon Jun  1 20:41:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  acpi: add missing ssdt
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

As the implementation of const_le16 and const_le32 is not build time constant
on big endian systems this need to be fixed.

  CC    hw/input/virtio-input-hid.o
hw/input/virtio-input-hid.c:340:13: error: initializer element is not constant
hw/input/virtio-input-hid.c:340:13: error: (near initialization for ‘virtio_keyboard_config[1].u.ids.bustype’)
...
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit 5cb18b3d
    TPM2 ACPI table support

was missing a file, so build with iasl fails
(build without iasl works since it uses the generated
 hex files).
Reported-by: N"Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pc, pci, tpm, virtio, vhost enhancements and fixes

A bunch of cleanups and fixes all over the place,
enhancements in TPM, virtio and vhost.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon Jun  1 13:19:48 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (60 commits)
  vhost-user: add multi queue support
  virtio: make features 64bit wide
  qdev: add 64bit properties
  virtio-mmio: ioeventfd support
  hw/acpi/aml-build: Fix memory leak
  acpi: add aml_while() term
  acpi: add aml_increment() term
  acpi: add aml_shiftright() term
  acpi: add aml_shiftleft() term
  acpi: add aml_index() term
  acpi: add aml_lless() term
  acpi: add aml_add() term
  TPM2 ACPI table support
  tpm: Probe for connected TPM 1.2 or TPM 2
  Extend TPM TIS interface to support TPM 2
  Add stream ID to MSI write
  acpi: Simplify printing to dynamic string
  i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
  i386/pc_q35: don't insist on board FDC if there's no default floppy
  i386/pc: '-drive if=floppy' should imply a board-default FDC
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.
Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: NChangchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Make features 64bit wide everywhere.

On migration a full 64bit guest_features field is sent if one of the
high bits is set, in addition to the lower 32bit guest_features field
which must stay for compatibility reasons.  That way we send the lower
32 feature bits twice, but the code is simpler because we don't have
to split and compose the 64bit features into two 32bit fields.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Needed for virtio features which go from 32bit to 64bit with virtio 1.0
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

set_host_notifier and set_guest_notifiers supported by virtio-mmio now.
Most code copied from virtio-pci.

This makes it possible to use vhost-net with virtio-mmio,
improving performance by about 30%.

The kvm-arm does not yet support irqfd, need to fix the hard-coded part after
kvm-arm gets irqfd support.
Signed-off-by: NYing-Shiuan Pan <yingshiuan.pan@gmail.com>
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Add encoding for ACPI DefWhile Opcode.
Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add encoding for ACPI DefIncrement Opcode.
Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add encoding for ACPI DefShiftRight Opcode.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>

Add encoding for ACPI DefShiftLeft Opcode.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>

Add encoding for ACPI DefIndex Opcode.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>

Add encoding for ACPI DefLLess Opcode.
Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add encoding for ACPI DefAdd Opcode.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>

Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.

Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

TriCore bugfixes

# gpg: Signature made Sat May 30 15:50:49 2015 BST using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"

* remotes/bkoppelmann/tags/pull-tricore-20150530:
  target-tricore: fix BOL_ST_H_LONGOFF using ld
  target-tricore: fix msub32_q producing the wrong overflow bit
  target-tricore: fix OPC2_32_RR_DVINIT_HU having write before use on the result
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In the TPM passthrough backend driver, modify the probing code so
that we can check whether a TPM 1.2 or TPM 2 is being used
and adapt the behavior of the TPM TIS accordingly.

Move the code that tested for a TPM 1.2 into tpm_utils.c
and extend it with test for probing for TPM 2. Have the
function return the version of TPM found.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Following the recent upgrade to version 1.3, extend the TPM TIS
interface with capabilities introduced for support of a TPM 2.

TPM TIS for TPM 2 introduced the following extensions beyond the
TPM TIS 1.3 (used for TPM 1.2):

- A new 32bit interface Id register was introduced.
- New flags for the status (STS) register were defined.
- New flags for the capability flags were defined.

Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2
on the backend side. Support the old TPM TIS 1.3 configuration if a
TPM 1.2 is being used. A subsequent patch will then determine which
TPM version is being used in the backend.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus.
This patch implements passing these IDs in qemu.
SMMU is also known to use stream IDs, therefore this addition can also be useful for
implementing platforms with SMMU.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

 Changes from v1:
- Added bus number to the stream ID
- Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into
msi_send_message() function.
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

build_append_namestringv() and aml_string() first calculate the
resulting string's length with vsnprintf(NULL, ...), then allocate,
then print for real.  Simply use g_strdup_vprintf() or g_vasprintf()
instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

It is Very annoying to carry forward an outdatEd coNtroller with a mOdern
Machine type.

Hence, let us not instantiate the FDC when all of the following apply:
- the machine type is pc-q35-2.4 or later,
- "-device isa-fdc" is not passed on the command line (nor in the config
  file),
- no "-drive if=floppy,..." is requested.

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

The "no_floppy = 1" machine class setting causes "default_floppy" in
main() to become zero. Consequently, default_drive() will not call
drive_add() and drive_new() for IF_FLOPPY, index=0, meaning that no
default floppy drive will be created for the virtual machine. In that
case, board code should also not insist on the creation of the
board-default FDC.

The board-default FDC will still be created if the user requests a floppy
drive with "-drive if=floppy".

Additionally, separate FDCs can be specified manually with "-device
isa-fdc". They allow the

  -device isa-fdc,driveA=...

syntax that is more flexible than the one required by the board-default
FDC:

  -global isa-fdc.driveA=...

This patch doesn't change the behavior observably, as all Q35 machine
types have "no_floppy = 0".

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Even if board code decides not to request the creation of the FDC (keyed
off board-level factors, to be determined later), we should create the FDC
nevertheless if the user passes '-drive if=floppy' on the command line.

Otherwise '-drive if=floppy' would break without explicit '-device
isa-fdc' on such boards.

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

This patch introduces no observable change, but it allows the callers of
pc_basic_device_init(), ie. pc_init1() and pc_q35_init(), to request (or
not request) the creation of the FDC explicitly.

At the moment both callers pass constant create_fdctrl=true (hence no
observable change).

Assuming a board passes create_fdctrl=false, "floppy" will be NULL on
output, and (beyond the FDC not being created) that NULL will be passed on
to pc_cmos_init(). Luckily, pc_cmos_init() already handles that case.

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Increase the queue limit to 1024. But virtio-ccw and s390-virtio won't
support this, this is done through failing device_plugged() for those
two transports if the number of virtqueues is greater than 64.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic.

Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch introduce a virtio-s390 specific device_plugged() function
and doing the number of virtqueue validation inside.

Cc: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Cc: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Cc: Alexander Graf <agraf@suse.de>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch introduces virtio_get_num_queues() which iterates the vqs
array and return the number of virtqueues used by device.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>