- 11 1月, 2011 2 次提交
-
-
由 Gerd Hoffmann 提交于
This patch allows to set usb descriptor strings per device instance. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
This patch adds hw/usb-desc.[ch] files. They carry data structures for various usb descriptors and helper functions to generate usb packets from the structures. The intention is to have a internal representation of the device desription which is more usable than the current char array blobs, so we can have common code handle common usb device emulation using the device description. The usage of this infrastructure is optional for usb drivers as there are cases such as pass-through where it probably isn't very useful. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 12 12月, 2010 1 次提交
-
-
由 Gleb Natapov 提交于
Ports on root hub will have NULL here. This is needed to reconstruct path from device to its root hub to build device path. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 01 4月, 2010 1 次提交
-
-
由 Max Reitz 提交于
Mass Storage Reset and Get Max LUN are class specific requests, but they were not marked as such in hw/usb-msd.c, moved therefore ClassInterfaceRequest and ClassInterfaceOutRequest from hw/usb-net.c to hw/usb.h. Furthermore there was a problem in hw/usb-ohci.c when using DEBUG concerning systems where size_t is a 32 bit integer (printf resulted in a segmentation fault). Signed-off-by: NMax Reitz <max@tyndur.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 19 12月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Rebased to master, adapted to device renaming by armbru, no other changes. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 12 12月, 2009 2 次提交
-
-
由 Markus Armbruster 提交于
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
It's not a device name, it's the USB product description string. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 30 10月, 2009 4 次提交
-
-
由 Gerd Hoffmann 提交于
Hook up usb_msd_init. Also rework handling of encrypted block devices, move the code out vl.c. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add a auto_attach field to USBDevice, which is enabled by default. USB drivers can clear this field in case they do *not* want the device being attached (i.e. plugged into a usb port) automatically after successfull init(). Use cases (see next patches): * attaching encrypted mass storage devices. * -usbdevice host:... Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patchs adds infrastructure to handle -usbdevice via qdev callbacks. USBDeviceInfo gets a name field (for the -usbdevice driver name) and a callback for -usbdevice parameter parsing. The new usbdevice_create() function walks the qdev driver list and looks for a usb driver with a matching name. When a parameter parsing callback is present it is called, otherwise the device is created via usb_create_simple(). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 10月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
Hook into DeviceInfo->exit(). handle_destroy() must not free the state struct, this is handled by the new usb_qdev_exit() function now. qdev_free(usb_device) works now. Fix usb hub to qdev_free() all connected devices on unplug. Unplugging a usb hub works now. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 12 9月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235, f40d7537, 96555a96 and 3990d09a but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 10 9月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
Move usb code from vl.c to usb-bus.c and make it use the new data structures added by qdev conversion. qemu usb core should be able to handle multiple USB busses just fine now (untested though). Kill some usb_*_init() legacy functions, use usb_create_simple() instead. Kill some FIXMEs added by the first qdev/usb patch. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
Remove explicit struct qualifiers and rename structure types. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 06 3月, 2009 3 次提交
-
-
由 aliguori 提交于
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Currently, waiting for the user to type in some password blocks the whole VM because monitor_readline starts its own I/O loop. And this loop also screws up reading passwords from virtual console. Patch below fixes the shortcomings by using normal I/O processing also for waiting on a password. To keep to modal property for the monitor terminal, the command handler is temporarily replaced by a password handler and a callback infrastructure is established to process the result before switching back to command mode. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Reading the passwords for encrypted hard disks during early startup is broken (I guess for quiet a while now): - No monitor terminal is ready for input at this point - Forcing all mux'ed terminals into monitor mode can confuse other users of that channels To overcome these issues and to lay the ground for a clean decoupling of monitor terminals, this patch changes the initial password inquiry as follows: - Prevent autostart if there is some encrypted disk - Once the user tries to resume the VM, prompt for all missing passwords - Only resume if all passwords were accepted Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 29 9月, 2008 2 次提交
-
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5349 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5347 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 14 9月, 2008 1 次提交
-
-
由 aliguori 提交于
This patch adds support for removing USB devices by host address. Which is usefull for things like libvirtd because there is no easy way to find guest USB address of the host device. In other words you can now do: usb_add host:3.5 ... usb_del host:3.5 Before the patch 'usb_del' did not support 'host:' notation. ---- Syntax for specifying auto connect filters has been improved. Old syntax was host:bus.dev host:pid:vid New syntax is host:auto:bus.dev[:pid:vid] In both the cases any attribute can be set to "*". New syntax is more flexible and lets you do things like host:3.*:5533:* /* grab any device on bus 3 with vendor id 5533 */ It's now possible to remove auto filters. For example: usb_del host:auto:3.*:5533:* Active filters are printed after all host devices in 'info usb' output. Which now looks like this: Device 1.1, speed 480 Mb/s Hub: USB device 1d6b:0002, EHCI Host Controller Device 1.4, speed 480 Mb/s Class 00: USB device 1058:0704, External HDD Auto filters: Device 3.* ID *:* Signed-off-by: NMax Krasnyansky <maxk@kernel.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5205 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 30 8月, 2008 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5115 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 22 8月, 2008 3 次提交
-
-
由 aliguori 提交于
A bit better documentation of the USB device API, namely return codes. Rewrite of usb_generic_handle_packet() to make it more reable and easier to follow. Signed-off-by: NMax Krasnyansky <maxk@kernel.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5049 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
QEMU can now automatically grab host USB devices that match the filter. For now I just extended 'host:X.Y' and 'host:VID:PID' syntax to handle wildcards. So for example if you do something like usb_add host:5.* QEMU will automatically grab any non-hub device with host address 5.*. Same with the 'host:PID:*', we grab any device that matches PID. Filtering itself is very generic so we can probably add more elaborate syntax like 'host:BUS.ADDR:VID:PID'. So that we can do 'host:5.*:6000:*'. Anyway, it's implemented using a periodic timer that scans host devices and grabs those that match the filter. Timer is started when the first filter is added. We now keep the list of all host devices that we grabbed to make sure that we do not grab the same device twice. btw It's currently possible to grab the same host device more than once. ie You can just do "usb_add host:1.1" more than once, which of course does not work. So this patch fixes that issue too. Along with auto disconnect patch that I send a minute ago the setup is very seamless now. You can just allocate some usb ports to the VMs and plug/unplug devices at any time. Signed-off-by: NMax Krasnyansky <maxk@kernel.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5048 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
I got really annoyed by the fact that you have to manually do usb_del in the monitor when host device is unplugged and decided to fix it :) Basically we now automatically remove guest USB device when the actual host device is disconnected. At first I've extended set_fd_handlerX() stuff to support checking for exceptions on fds. But unfortunately usbfs code does not wake up user-space process when device is removed, which means we need a timer to periodically check if device is still there. So I removed fd exception stuff and implemented it with the timer. Signed-off-by: NMax Krasnyansky <maxk@kernel.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5047 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 18 7月, 2008 1 次提交
-
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4884 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 22 4月, 2008 1 次提交
-
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4232 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 14 1月, 2008 1 次提交
-
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3914 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 18 11月, 2007 1 次提交
-
-
由 pbrook 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 17 9月, 2007 2 次提交
-
-
由 ths 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 ths 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 22 6月, 2007 1 次提交
-
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2996 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 11 6月, 2007 1 次提交
-
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2977 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 07 6月, 2007 1 次提交
-
-
由 ths 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2945 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 08 4月, 2007 1 次提交
-
-
由 pbrook 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2635 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 18 3月, 2007 1 次提交
-
-
由 pbrook 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2490 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 11 2月, 2007 1 次提交
-
-
由 ths 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2408 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 12 8月, 2006 1 次提交
-
-
由 pbrook 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2107 c046a42c-6fe2-441c-8c8c-71466251a162
-