When combining multiple values as part of a NEON array load, do explcit
shift/or rather than using gen_bfi.  This voids redundant mask
operations.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Force -m31/-m64 based on s390/s390x target.

Force -march=z990.  The TCG backend will always require the
long-displacement facility, so the compiler may as well make
use of that as well.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The default placement of the application at 0x80000000 is fine,
and will avoid the default placement for most other guests.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

There's no _llseek on s390x either.  Replace the existing
test for __x86_64__ with a functional test for __NR_llseek.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This allows the use of direct calls to the helpers,
and a direct branch back to the epilogue.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Before gcc 4.2, __builtin___clear_cache doesn't exist, and
afterward the gcc s390 backend implements it as nothing.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

42f1ced2 removed irq lowering
during reset. However, for chip reset command and DMA reset signal,
its actually the correct thing to do.

Lower IRQ on soft reset only.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

BusState::name is allocated in qbus_create_inplace().
So it should be freed by qbus_free().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch fixes the following compilation errors in multiboot.c
when DEBUG_MULTIBOOT is defined.
Use TARGET_FMT_plx instead of %x for target_phys_addr_t.

  CC    i386-softmmu/multiboot.o
cc1: warnings being treated as errors
qemu/hw/multiboot.c: In function 'mb_add_mod':
qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 4 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t'
qemu/hw/multiboot.c: In function 'load_multiboot':
qemu/hw/multiboot.c:279: error: format '%#x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:307: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t'
qemu/hw/multiboot.c:308: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t'
make[1]: *** [multiboot.o] Error 1
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

remove one #ifdef CONFIG_BOCHS_VBE.
Call vga_init_vbe() instead.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

fix memory leak.
there is no need to allocate more than one gui_timer.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@axis.com>

The full general-instruction-extension facility was added to binutils
after the change to GPLv3.  This is not the entire extension, just
what we're using in TCG.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Unify with existing special-purpose configure code for win32.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Making an xyzdir variable for each directory prepares for the next
patches introducing config-host.h defines and configure options for them.
It also fixes the problem where overriding prefix at "make install"
time did not override it for sysconfdir.

Removes some of the differences between sysconfdir and other variables,
the rest will go away later.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

confsuffix was write-only, flesh it out.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Just a personal preference against duplicating hieroglyphics.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

It would fail later anyway.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

TCGv t1 needs tcg_temp_free instead of tcg_temp_free_i32.

Cc: Nathan Froyd <froydnj@codesourcery.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Unlike MIPS16, microMIPS lets you choose the ISA mode for your exception
handlers.  The ISA mode is selectable via a user-writable CP0.Config3
flag.
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>