This patch remove limitation for fc[tf]id[*] on 32 bits targets and
add a new insn flag for signed integer 64 conversion PPC2_FP_CVT_S64
Signed-off-by: NPierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The in-kernel OpenPIC emulation only supports a single map. However, we
map the OpenPIC at 2 locations: The CPU visible one and the PCI visible
one. For KVM acceleration, we only care about the first one.

To make sure that we only map that first mapping and not the PCI map that
happens dynamically later during bootup, ignore maps that happen when
we are already considering ourselves mapped.

Credits due are to Bogdan and Mihai for debugging this.
Reported-by: NBogdan Purcareata <bogdan.purcareata@freescale.com>
Reported-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

As of qemu-2.1, spapr/pseries, has a set of versioned machine classes to
represent the machine type as it appeared to the guest in different qemu
versions.  This allows for safe migration of guests between current and
future qemu versions.

However, these are organized a bit differently from those for PC: on PC,
the default plain "pc" machine type is just an alias for the most recent
versioned machine type.  In sPAPR, it names the base machine class from
which the versioned types are derived.

The PC approach is preferable; it makes it clearer which explicit version
is the current one.  Additionally updating the "current" machine as the
base class makes it even more likely than otherwise to incorrectly alter
the versioned machines' behaviour when updating the current machine.

Therefore this patch changes sPAPR to the PC approach - the base class
becomes abstract, and plain "pseries" becomes an alias for the most
recent versioned machine class.  Since qemu-2.1 is now released, we also
create a new pseries-2.2 machine type, to incorporate changes during this
development cycle (for now it is identical to pseries-2.1).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The virtex-ml507 is a Xilinx CPU based system, and requires several sub
devices which are only included with CONFIG_XILINX.  Therefore, it should
only be compiled if CONFIG_XILINX is set.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Adjust the IVOR mask for generic Book E implementation to support bit 59.
This is consistent with the Power ISA.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Reported-by: NPierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

By mistake, QEMU uses the maximum compatibility level from the command
line instead of the value negotiated in client-architecture-support call.

This replaces @max_compat with @cpu_version. This only affects guests
which do not support the host CPU.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This will match the code we use in fpu_helper.c when we flip
CRF_* bit-endianness.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

It sets CR1, not CR6 (and the spec agrees).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

It must return 8 and place 8 in XER, but the current code uses
i directly which is 9 at this point of the code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This was off-by-one.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

QOM infrastructure fixes and device conversions

* Fixes for -device foo,help

# gpg: Signature made Tue 04 Nov 2014 17:27:41 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter:
  qdev: Use qdev_get_device_class() for -device <type>,help
  qdev: Move error printing to the end of qdev_device_help()
  qdev: Create qdev_get_device_class() function
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make sure we try to list properties from classes that can be safely used
with "-device".

Fixes the following crashes:

  $ qemu-system-x86_64 -device x86_64-cpu,help
  **
  ERROR:qom/object.c:336:object_initialize_with_type: assertion failed: (type->abstract == false)
  Aborted (core dumped)
  $ qemu-system-x86_64 -device host-x86_64-cpu,help
  qemu-system-x86_64: [...]/target-i386/cpu.c:1329: host_x86_cpu_initfn: Assertion `(kvm_allowed)' failed.
  Aborted (core dumped)

After applying this patch:

  $ qemu-system-x86_64 -device x86_64-cpu,help
  Parameter 'driver' expects non-abstract device type
  $ qemu-system-x86_64 -device host-x86_64-cpu,help
  Parameter 'driver' expects pluggable device type
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Extract the DeviceClass lookup from qdev_device_add() to a separate
function.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

QOM CPUState and X86CPU

* Cleanups for -cpu ...,enforce

* remotes/afaerber/tags/qom-cpu-for-peter:
  target-i386: Disable SVM by default in KVM mode
  target-i386: Don't enable nested VMX by default
  target-i386: Remove unsupported bits from all CPU models
  target-i386: Disable CPUID_ACPI by default in KVM mode
  target-i386: Rename KVM auto-feature-enable compat function
  pc: Create pc_compat_2_1() functions

Conflicts:
	hw/i386/pc_piix.c
	hw/i386/pc_q35.c
[PMM: Fixed minor textual conflicts]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

gtk: fix fullscreen with gtk3, fix build with older gtk2 versions.

# gpg: Signature made Tue 04 Nov 2014 13:42:09 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-gtk-20141104-2:
  gtk: add GDK_KEY_pause #define
  gtk: Hide the menubar when in fullscreen mode (lp 1294898)
  gtk: Install vc accelerators on parent window
  gtk: Install fullscreen accelerator on toplevel window
  gtk: Grab accel_group from GtkDisplayState
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make SVM be disabled by default on all CPU models when in KVM mode.
Nested SVM is enabled by default in the KVM kernel module, but it is
probably less stable than nested VMX (which is already disabled by
default).

Add a new compat function, x86_cpu_compat_kvm_no_autodisable(), to keep
compatibility on previous machine-types.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

TCG doesn't support VMX, and nested VMX is not enabled by default in the
KVM kernel module.

So, there's no reason to have VMX enabled by default on the core2duo and
coreduo CPU models, today. Even the newer Intel CPU model definitions
don't have it enabled.

In this case, we need machine-type compat code, as people may be running
the older machine-types on hosts that had VMX nesting enabled.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The following CPU features were never supported by neither TCG or KVM,
so they are useless on the CPU model definitions, today:

 * CPUID_DTS (DS)
 * CPUID_HT
 * CPUID_TM
 * CPUID_PBE
 * CPUID_EXT_DTES64
 * CPUID_EXT_DSCPL
 * CPUID_EXT_EST
 * CPUID_EXT_TM2
 * CPUID_EXT_XTPR
 * CPUID_EXT_PDCM
 * CPUID_SVM_LBRV

As using "enforce" mode is the only way to ensure guest ABI doesn't
change when moving to a different host, we should make "enforce" mode
the default or at least encourage management software to always use it.

In turn, to make "enforce" usable, we need CPU models that work without
always requiring some features to be explicitly disabled. This patch
removes the above features from all CPU model definitions.

We won't need any machine-type compat code for those changes, because it
is impossible to have existing VMs with those features enabled.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

KVM never supported the CPUID_ACPI flag, so it doesn't make sense to
have it enabled by default when KVM is enabled.

The motivation here is exactly the same we had for the MONITOR flag
(disabled by commit 136a7e9a).

And like in the MONITOR flag case, we don't need machine-type compat code
because it is currently impossible to run a KVM VM with the ACPI flag set.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Add pause key to the list of compatibility defines.
Fixes the build with older gtk versions.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

target-arm queue:
 * avoid passing CPU env pointer around in A32/T32 decoders
 * split M profile exception masking out from A/R profile

# gpg: Signature made Tue 04 Nov 2014 12:28:15 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20141104:
  target-arm: Correct condition for taking VIRQ and VFIQ
  target-arm: Separate out M profile cpu_exec_interrupt handling
  target-arm/translate.c: Don't pass CPUARMState * to disas_arm_insn()
  target-arm/translate.c: Don't pass CPUARMState around in the decoder
  target-arm/translate.c: Don't use IS_M()
  target-arm/translate.c: Use arm_dc_feature() rather than arm_feature()
  target-arm/translate.c: Use arm_dc_feature() in ENABLE_ARCH_ macros
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images

# gpg: Signature made Tue 04 Nov 2014 00:24:41 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The VIRQ and VFIQ exceptions are (as the comments say) only
taken if the CPU is in Non-secure state and the IMO/FMO bits
are set to enable virtualized interrupts. Correct the code
to actually implement this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1414684132-23971-3-git-send-email-peter.maydell@linaro.org

The M profile cpu_exec_interrupt handling is fairly simple
but does include an M profile specific oddity (disabling
interrupts for certain PC values). A/R profile handling
on the other hand is getting rapidly more complicated
with the support for EL2 and EL3. Split the M profile
code out into its own implementation of cpu_exec_interrupt
to keep these two things out of each others' way.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1414684132-23971-2-git-send-email-peter.maydell@linaro.org

Refactor to avoid passing a CPUARMState * to disas_arm_insn(). To do this
we move the "read insn from memory" code to the callsite and pass the
insn to the function instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: NClaudio Fontana <claudio.fontana@huawei.com>

Passing the CPUARMState around in the decoder is a recipe for
bugs where we accidentally generate code that depends on CPU
state which isn't reflected in the TB flags. Stop doing this
and instead use DisasContext as a way to pass around those
bits of CPU state which are known to be safe to use.

This commit simply removes initial "CPUARMState *env" parameters
from various function definitions, and removes the initial "env"
argument from the places where those functions are called.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: NClaudio Fontana <claudio.fontana@huawei.com>

Instead of using IS_M(), use arm_dc_feature(s, ARM_FEATURE_M), so we
don't need to pass CPUARMState pointers around the decoder.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-4-git-send-email-peter.maydell@linaro.org
Reviewed-by: NClaudio Fontana <claudio.fontana@huawei.com>

Use arm_dc_feature() rather than arm_feature() to avoid using
CPUARMState unnecessarily.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: NClaudio Fontana <claudio.fontana@huawei.com>

In fullscreen mode, we attempt to shrink the menubar to 1 pixel in height,
so it takes up as little room as possible while still allowing us to use
the keyboard shortcuts for its various operations.

However this shrinking is disregarded on gtk3, so the entire menu bar is
visible, which isn't very pleasant. This patch hides the menu bar instead.

The side effect is that the only keyboard shortcuts that will work in this
mode are the ones that we explicitly register on the top level window and
not the menu bar. The previous patches changed the fullscreen and vc
shortcuts to work like that, which I think are the only ones that really
matter in for the fullscreen case.

https://bugs.launchpad.net/qemu/+bug/1294898Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

So they are usable when we hide the menubar in upcoming patches. This
has the accelerator text caveat as the fullscreen bit in the previous
patch.
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Instead of installing it on the menu. This will be needed to keep the
fullscreen keyboard shortcut working when we hide the menu (in future
patches).

On gtk < 3.8, this has the unfortunate side effect of no longer listing
the key combo in the UI. We could manually change the label in that case,
but it will look visually out of place, and I'm not sure if anyone really
cares.
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Rather than needlessly pass it around
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

All the places where we use the ENABLE_ARCH_* and ARCH() macros have a
DisasContext* s, so switch them over to use arm_dc_feature() rather than
arm_feature() so we don't need to pass the CPUARMState* env around too.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: NClaudio Fontana <claudio.fontana@huawei.com>

* remotes/lalrae/tags/mips-20141103: (34 commits)
  target-mips: add MSA support to mips32r5-generic
  disas/mips.c: disassemble MSA instructions
  target-mips: add MSA MI10 format instructions
  target-mips: add MSA 2RF format instructions
  target-mips: add MSA VEC/2R format instructions
  target-mips: add MSA 3RF format instructions
  target-mips: add MSA ELM format instructions
  target-mips: add MSA 3R format instructions
  target-mips: add MSA BIT format instructions
  target-mips: add MSA I5 format instruction
  target-mips: add MSA I8 format instructions
  target-mips: add MSA branch instructions
  target-mips: add msa_helper.c
  target-mips: add msa_reset(), global msa register
  target-mips: add MSA opcode enum
  target-mips: stop translation after ctc1
  target-mips: remove duplicated mips/ieee mapping function
  target-mips: add MSA exceptions
  target-mips: add MSA defines and data structure
  target-mips: enable features in MIPS64R6-generic CPU
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images to SVN r1321 built from submodule.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

pc, virtio, misc bugfixes

A bunch of minor bugfixes all over the place.

changes from v2:
    added cpu hotplug rework
    added default vga type switch
    more fixes
changes from v1:
    fix for test re-generation script
    add missing acks to two patches
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (28 commits)
  vga: flip qemu 2.2 pc machine types from cirrus to stdvga
  vga: add default display to machine class
  vhost-user: fix mmap offset calculation
  hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup()
  smbios: Encode UUID according to SMBIOS specification
  pc: Add pc_compat_2_1() function
  hw/virtio/vring/event_idx: fix the vring_avail_event error
  hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile
  hw/pci: fixed error flow in pci_qdev_init
  -machine vmport=off: Allow disabling of VMWare ioport emulation
  acpi/cpu-hotplug: introduce helper function to keep bit setting in one place
  cpu-hotplug: rename function for better readability
  qom/cpu: remove the unused CPU hot-plug notifier
  pc: Update rtc_cmos in pc_cpu_plug
  pc: add cpu hotplug handler to PC_MACHINE
  acpi:piix4: convert cpu hotplug to hotplug_handler API
  acpi:ich9: convert cpu hotplug to hotplug_handler API
  acpi/cpu: add cpu hotplug callback function to match hotplug_handler API
  acpi: create separate file for TCPA log
  tests: fix rebuild-expected-aml.sh for acpi-test rename
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

linux-user pull for 2.2

Two minor fixes and new a feature, addition of QEMU_RAND_SEED for
testing needs.

# gpg: Signature made Mon 03 Nov 2014 11:49:39 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20141101:
  elf: take phdr offset into account when calculating the program load address
  linux-user: Fix fault address truncation AArch64
  linux-user: Let user specify random seed
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The x86_cpu_compat_disable_kvm_features() name was a bit confusing, as
it won't forcibly disable the feature for all CPU models (i.e. add it to
kvm_default_unset_features), but it will instead turn off the KVM
auto-enabling of the feature (i.e. remove it from kvm_default_features),
meaning the feature may still be enabled by default in some CPU models).
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>