Null errp argument makes no sense.  Assert it's not null, to make this
explicit, and guard against misuse.  All current callers pass non-null
errp.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null.  ga_get_fd_handle() and
guest_file_handle_add() don't return a useful value when they fail,
but that's just stupid.  Fix that, and check them instead.  As far
as I can tell, errp can't be null there, but this is more robust and
more obviously correct.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Among the callers, only assigned_initfn() should set the  monitor's stored
error. Other callers may run in contexts where the monitor's stored error
makes no sense. For example:

assigned_dev_pci_write_config()
  assigned_dev_update_msix()
    assign_intx()
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Also, change the return type to "void"; the function is static (with a
sole caller) and the negative errno values are not distinguished from each
other.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The return type is also changed from "int" to "void", because it was used
in a success vs. failure sense only (the caller didn't distinguish error
codes from each other, and even assigned_dev_register_msix_mmio() masked
mmap()'s errno values with a common -EFAULT).
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

assigned_initfn()
  get_real_device()
    read()
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Propagate any errors while adding PCI capabilities to
assigned_device_pci_cap_init(). We'll continue the propagation upwards
when assigned_device_pci_cap_init() becomes a leaf itself (when none of
its callees will report errors internally any longer when detecting and
returning them).
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

... and rebase pci_add_capability() to it.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Rename check_irqchip_in_kernel() to verify_irqchip_in_kernel(), so that
the name reflects our expectation better. Rather than returning a bool,
make it do nothing or set an Error.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

get_real_id() has two thin wrappers (and no other callers),
get_real_vendor_id() and get_real_device_id(); it's easiest to convert
them in one fell swoop.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This allows us to report the entire error with one error_report() call,
easing future error propagation.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Propagate any errors in monitor fd handling up to get_real_device(), and
report them there. We'll continue the propagation upwards when
get_real_device() becomes a leaf itself (when none of its callees will
report errors internally any longer when detecting and returning an
error).
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
eviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

and rebase monitor_handle_fd_param() to it. (Note that this will slightly
change the behavior when the qemu_parse_fd() branch is selected and it
fails: we now report (and in case of QMP, set) the error immediately,
rather than allowing the caller to set its own error message (if any)).
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

qemu_parse_fd() used to handle at least the following strings incorrectly:
o "-2":         simply let through
o "2147483648": returned as LONG_MAX==INT_MAX on ILP32 (with ERANGE
                ignored); implementation-defined behavior on LP64
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

strtosz_suffix() might return negative error, this patch fixes
the error handling.

This patch also changes to handle error in the if statement
rather than handle success specially, this will make this use
of strtosz_suffix consistent with all other uses.
Signed-off-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The primitive uses JSON syntax, and include paths are relative to the file using the directive:

  { 'include': 'path/to/file.json' }
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Use an explicit input file on the command-line instead of reading from standard
input.

It also outputs the proper file name when there's an error.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

spice: small fixes

# gpg: Signature made Thu 08 May 2014 09:50:21 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-7:
  spice: fix libvirt snapshots
  spice: fix "info spice"
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Only notify spice-server about migration events in case we got
target host information beforehand.  So we kick the seamless spice
client migration only in case a actual live migration happens, not
when libvirt uses live-migration-to-file for snapshotting.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In case no listening address was specified, "info spice" reports
"0.0.0.0" as address.  Which is incorrect in case spice is listening
on ipv6.  Replace it by a wildcard "*" to indicate it is not limited
to a specific address.

Note:  Being more specific is not possible without extending the
spice-server api.  The socket is handled by spice-server not
qemu, so qemu can't easily figure the actual socket address.
Reported-by: NDavid Jaša <djasa@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

trivial patches for 2014-05-07

# gpg: Signature made Wed 07 May 2014 18:01:15 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-05-07: (21 commits)
  libcacard: remove unnecessary EOL from debug prints
  docs/memory.txt: Fix document on MMIO operations
  readline: Sort completions before printing them.
  readline: use g_strndup instead of open-coding it
  qmp: report path ambiguity error
  libcacard: replace pstrcpy() with memcpy()
  glib: move g_poll() replacement into glib-compat.h
  do not call g_thread_init() for glib >= 2.31
  hw/9pfs: Add include file for exported symbol
  xen: remove unused global, xen_xcg
  hw: Add missing 'static' attributes
  qemu-timer: Add missing 'static' attribute
  ui: Add missing 'static' attribute
  monitor: Add missing 'static' attribute
  hw/s390x: Add missing 'static' attribute
  hw/mips: Add missing 'static' and 'const' attributes
  hw/9pfs: Add missing 'static' attributes
  arch_init: Be sure of only one exit entry with DPRINTF() for ram_load()
  tests/tcg: Fix compilation of test_path
  qga: Fix typo (plural) in comment
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/sstabellini/xen-140507-2:
  xen_disk: add discard support
  pass an inclusive address range to xc_domain_pin_memory_cacheattr
  xen: factor out common functions
  xen: move Xen HVM files under hw/i386/xen
  xen: move Xen PV machine files to hw/xenpv
  qemu-xen: free all the pirqs for msi/msix when driver unload
  exec: Limit translation limiting in address_space_translate to xen
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

.impl.valid should be .impl.unaligned and the description needs some
fixes.

.old_portio is removed since commit b40acf99 (ioport: Switch
dispatching to memory core layer).
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NHani Benhabiles <hani@linux.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

Without this, ambiguous path is reported to the user as
"not found", which is confusing at least.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Commit 2e679780 replaced strncpy() with pstrcpy()
in one place in libcacard.  This is a qemu-specific function,
while libcacard is a stand-alone library (or tries to be).
But since we know the exact length of the string to copy,
and know that it definitely will fit in the destination
buffer, use memcpy() instead, and null-terminate the string
after that.

An alternative is to use g_strlcpy() or strncpy(), but memcpy()
is more than adequate in this place.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org
Cc: Alon Levy <alevy@redhat.com>

We have a dedicated header file for wrappers to smooth over glib version
differences.  Move the g_poll() definition into glib-compat.h for
consistency.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org

glib >= 2.31 always enables thread support and g_thread_supported()
is #defined to 1, there's no need to call g_thread_init() anymore,
and it definitely does not need to report error which never happens.
Keep code for old < 2.31 glibc anyway for now, just #ifdef it
differently.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-trivial@nongnu.org