- 12 9月, 2012 12 次提交
-
-
由 Gerd Hoffmann 提交于
Also register different memory regions for capabilities, operational registers and port status registers. Create separate tracepoints for operational regs and port status regs. Ditch a bunch of sanity checks because the memory core will do this for us now. Offloading the byte, word and dword access handling to the memory core also has the side effect of fixing ehci register access on bigendian hosts. Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
xhci needs this for USB_REQ_SET_ADDRESS due to the way usb addressing is handled by the xhci hardware. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
git://git.kraxel.org/qemu由 Aurelien Jarno 提交于
* 'usb.64' of git://git.kraxel.org/qemu: (54 commits) xhci: allow bytewise capability register reads xhci: kill xhci_mem_{read,write} dispatcher functions xhci: support multiple interrupters xhci: pick target interrupter xhci: prepare xhci_runtime_{read,write} for multiple interrupters xhci: add XHCIInterrupter xhci: move register update into xhci_intr_raise xhci: add msix support xhci: rework interrupt handling xhci: fix & cleanup msi. usb-storage: usb3 support usb3: bos decriptor usb3: superspeed endpoint companion usb3: superspeed descriptors xhci: update port handling xhci: update register layout xhci: fix runtime write tracepoint xhci: add trace_usb_xhci_ep_set_dequeue xhci: trace cc codes in cleartext xhci: iso xfer support ...
-
由 Aurelien Jarno 提交于
optimizer.c contains some cases were the break is appearing in both the if and the else parts. Fix that by moving it to the outer part. Also move some common code there. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
brcond and setcond ops are not commutative, but it's easy to compute the new condition after swapping the arguments. Try to always put the constant argument in second position like for commutative ops, to help backends to generate better code. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
shift/rot r, 0, a is equivalent to movi r, 0. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
and r, a, 0 is equivalent to a movi r, 0. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
or/xor r, a, 0 is equivalent to a mov r, a. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Split expression simplification in multiple parts so that a given op can appear multiple times. This patch should not change anything. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Now that there are two passes of optimization (optimize.c, liveness) there is no point of outputing the statistics of the liveness part only. Update the code to take into account both optimizations. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 11 9月, 2012 28 次提交
-
-
由 Gerd Hoffmann 提交于
Some guests need this according to Alejandro Martinez Ruiz <alex@securiforest.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
... and register subregions instead, so we offload the dispatching to the the memory subsystem which is designed to handle it. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Everything is in place, flip the big switch now and enable support for multiple interrupters. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Pick the correct interrupter when queuing an event. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Prepare xhci runtime register access function for multiple interrupters. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Move all state belonging to the (single) interrupter into a separate struct. First step in adding support for multiple interrupters. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Now that we have a separate function to raise an IRQ we can move some comon code into the function. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Split xhci_irq_update into a function which handles intx updates (including lowering the irq line once the guests acks the interrupt) and one which is used for raising an irq only. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Drop custom write_config function which isn't needed any more. Make the msi property a bit property so it accepts 'on' & 'off'. Enable MSI by default. TODO: add compat property to disable on old machine types. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Add usb3 descriptors to usb-storage, so it shows up as superspeed device when connected to xhci. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Add support for creating BOS descriptor and device cappability descriptors. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Add support for building superspeed endpoint companion descriptors, create them for superspeed usb devices. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Add superspeed descriptor entry to USBDesc, advertise superspeed support when present. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
This patch changes the way xhci ports are linked to USBPorts. The fixed 1:1 relationship between xhci ports and USBPorts is gone. Now each USBPort represents a physical plug which has usually two xhci ports assigned: one usb2 and ond usb3 port. usb devices show up at one or the other, depending on whenever they support superspeed or not. This patch also makes the number of usb2 and usb3 ports runtime configurable by adding 'p2' and 'p3' properties. It is allowed to have different numbers of usb2 and usb3 ports. Specifying p2=4,p3=2 will give you an xhci adapter which supports all speeds on physical ports 1+2 and usb2 only on ports 3+4.
-
由 Gerd Hoffmann 提交于
Change the register layout to be a bit more sparse and also not depend on the number of ports. Useful when for making the number of ports runtime-configurable.
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Add support for iso transfers. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Implement mfindex register and mfindex wrap event. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
This patch splits the xhci_xfer_data function into three. The xhci_xfer_data function used to do does two things: (1) copy transfer data between guest memory and a temporary buffer. (2) report transfer results to the guest using events. Now we three functions to handle this: (1) xhci_xfer_map creates a scatter list for the transfer and uses that (instead of the temporary buffer) to build a USBPacket. (2) xhci_xfer_unmap undoes the mapping. (3) xhci_xfer_report sends out events. The patch also fixes reporting of transaction errors which must be reported unconditinally, not only in case the guest asks for it using the ISP flag. [ v2: fix warning ] Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
original xhci code (the one which used libusb directly) used to use 'background transfers' for iso streams. In upstream qemu the iso stream buffering is handled by usb-host & usb-redir, so we will never ever need this. It has been left in as reference, but is dead code anyway. Rip it out. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
usb-audio is a full speed (1.1) device, but bcdUSB claims it is usb 2.0. Fix it. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Samuel Thibault 提交于
Windows users need to know that they have to use the Baum driver to make the qemu braille device work. Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Hans de Goede 提交于
In order for redirection to work properly when redirecting to an emulated XHCI controller, the usb-redir-host must support both usb_redir_cap_ep_info_max_packet_size and usb_redir_cap_64bits_ids, reject any devices redirected to an XHCI controller when these are not supported. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-