- 24 9月, 2012 10 次提交
-
-
由 Jeff Cody 提交于
The aligned_buf pointer and aligned_buf size are no longer used in raw_posix.c, so remove all references to them. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
Rather than check for a non-NULL aligned_buf to determine if raw_aio_submit needs to check for alignment, check for the presence of BDRV_O_NOCACHE in the bs->open_flags. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags, and in the bs->open_flags. This patch removes the code, leaving the behaviour behind as if BDRV_O_CACHE_WB was set. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
Code motion, to move parsing of open flags into a helper function. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
Move AIO initialization for raw-posix block driver into a helper function. In addition to just code motion, the aio_ctx pointer is checked for NULL, prior to calling laio_init(), to make sure laio_init() is only run once. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
This is based on Supriya Kannery's bdrv_reopen() patch series. This provides a transactional method to reopen multiple images files safely. Image files are queue for reopen via bdrv_reopen_queue(), and the reopen occurs when bdrv_reopen_multiple() is called. Changes are staged in bdrv_reopen_prepare() and in the equivalent driver level functions. If any of the staged images fails a prepare, then all of the images left untouched, and the staged changes for each image abandoned. Block drivers are passed a reopen state structure, that contains: * BDS to reopen * flags for the reopen * opaque pointer for any driver-specific data that needs to be persistent from _prepare to _commit/_abort * reopen queue pointer, if the driver needs to queue additional BDS for a reopen Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
bdrv_set_enable_write_cache() sets the bs->enable_write_cache flag, but without the flag recorded in bs->open_flags, then next time a reopen() is performed the enable_write_cache setting may be inadvertently lost. This will set the flag in open_flags, so it is preserved across reopens. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
I believe the bs->keep_read_only flag is supposed to reflect the initial open state of the device. If the device is initially opened R/O, then commit operations, or reopen operations changing to R/W, are prohibited. Currently, the keep_read_only flag is only accurate for the active layer, and its backing file. Subsequent images end up always having the keep_read_only flag set. For instance, what happens now: [ base ] kro = 1, ro = 1 | v [ snap-1 ] kro = 1, ro = 1 | v [ snap-2 ] kro = 0, ro = 1 | v [ active ] kro = 0, ro = 0 What we want: [ base ] kro = 0, ro = 1 | v [ snap-1 ] kro = 0, ro = 1 | v [ snap-2 ] kro = 0, ro = 1 | v [ active ] kro = 0, ro = 0 Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Shanahan 提交于
If readonly=on is given at device creation time, the ->readonly flag needs to be set in the block driver state for this device so that readonly-ness is preserved across media changes (qmp change command). Similarly, to preserve the snapshot property requires ->open_flags to be correct. Signed-off-by: NKevin Shanahan <kmshanah@disenchant.net> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Weil 提交于
Those functions are missing in MinGW. Some versions of MinGW-w64 include defines for gmtime_r and localtime_r. Older versions of these macros are buggy (they return a pointer to a static variable), therefore we don't want them. Newer versions are similar to the code used here, but without the memset. The implementation which is used here is not strictly reentrant, but sufficiently good for QEMU on w32 or w64. Signed-off-by: NStefan Weil <sw@weilnetz.de> [blauwirbel@gmail.com: added comment about locking] Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 23 9月, 2012 13 次提交
-
-
由 Stefan Weil 提交于
smatch report: audio/audio_template.h:416 AUD_open_out(18) warn: variable dereferenced before check 'as' (see line 414) Moving the ldebug statement after the statement which checks 'as' fixes that warning. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: Nmalc <av1474@comtv.ru>
-
git://repo.or.cz/qemu/rth由 Blue Swirl 提交于
* 'tcg-sparc' of git://repo.or.cz/qemu/rth: tcg-sparc: Preserve branch destinations during retranslation tcg-sparc: Fix and enable direct TB chaining. tcg-sparc: Add %g/%o registers to alloc_order tcg-sparc: Use defines for temporaries. tcg-sparc: Mask shift immediates to avoid illegal insns. tcg-sparc: Clean up cruft stemming from attempts to use global registers. tcg-sparc: Change AREG0 in generated code to %i0. tcg-sparc: Support GUEST_BASE. tcg-sparc: Fix qemu_ld/st to handle 32-bit host. tcg-sparc: Assume v9 cpu always, i.e. force v8plus in 32-bit mode. tcg-sparc: Don't MAP_FIXED on top of the program tcg-sparc: Fix ADDX opcode. tcg-sparc: Hack in qemu_ld/st64 for 32-bit. linux-user: Use memcpy in get_user/put_user.
-
由 Max Filippov 提交于
In case Coprocessor Context option is enabled CPENABLE SR bits control whether access to coprocessors is allowed or would rise one of CoprocessorXDisabled exceptions. See ISA, 4.4.5 for more details. FP is coprocessor 0. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
These are comparison and conditional move opcodes. See ISA, 4.3.10 for more details. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
These are FP to integer and integer to FP conversion opcodes. See ISA, 4.3.10 for more details. Note that ISA description for utrunc.s is currently incorrect and will be fixed in future revisions. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
These are FP arithmetic opcodes. See ISA, 4.3.10 for more details. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
These are load/store instructions for FP registers with immediate or register index and optional base post-update. See ISA, 4.3.10 for more details. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
There are 16 32-bit FP registers (f0 - f15), control and status user registers (fcr, fsr). See ISA, 4.3.10 for more details. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
NaN propagation rule: leftmost NaN in the expression gets propagated to the result. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
Architectures that don't have signaling NaNs can define NO_SIGNALING_NANS, it will make float*_is_quiet_nan return 1 for any NaN and float*_is_signaling_nan always return 0. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
Flags passed into float{32,64}_muladd are treated as bits; assign independent bits to float_muladd_negate_* to allow precise control over what gets negated in float{32,64}_muladd. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Aurelien Jarno 提交于
This reverts commit ad49d1f7. This commit was not supposed to be pushed. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 22 9月, 2012 17 次提交
-
-
由 malc 提交于
Thanks to Richard Henderson Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Aurelien Jarno 提交于
-
由 Stefan Weil 提交于
The TCG targets no longer need individual implementations. Since commit 6a18ae2d, 'flags' is no longer used in tcg_target_get_call_iarg_regs_count. The remaining tcg_target_get_call_iarg_regs_count is trivial and only called once. Therefore the patch eliminates it completely. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
32 bit x86 hosts don't need registers for helper function arguments because they use the default stack based calling convention. Removing the registers allows simpler code for function tcg_target_get_call_iarg_regs_count. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
While 64 bit hosts use the first three registers which are also used as function input parameters, 32 bit hosts use TCG_REG_EAX and TCG_REG_EDX which are not used in parameter passing. After defining new register macros for the registers used in L constraint, the patch replaces most occurrences of tcg_target_call_iarg_regs[0], tcg_target_call_iarg_regs[1] and tcg_target_call_iarg_regs[2] by those new macros. tcg_target_call_iarg_regs remains unchanged when it is used for input arguments (only with 64 bit hosts) before tcg_out_calli. A comment related to those registers was fixed, too. Signed-off-by: NStefan Weil <sw@weilnetz.de> [aurel32: build fix on i386, small optimization for i386 in the prologue] Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
TCG uses 6 registers for function arguments on 64 bit Linux hosts, but only 4 registers on W64 hosts. Commit 2999a0b2 increased the number of arguments for some important helper functions from 4 to 5 which triggered a bug for W64 hosts: QEMU aborts when executing helper_lcall_real in the guest's BIOS because function tcg_target_get_call_iarg_regs_count always returned 6. As W64 has only 4 registers for arguments, the 5th argument must be passed on the stack using a correct stack offset. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Max Filippov 提交于
See http://lists.nongnu.org/archive/html/qemu-devel/2012-09/msg03196.html for the whole story. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Commit 25c4d9cc changed all TCGOpcode enums to be available, so we don't need to #ifdef #endif the one that are available only on some targets. This makes the code easier to read. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
The "op a, a, b" form is better handled on non-RISC host than the "op a, b, a" form, so swap the arguments to this form when possible, and when b is not a constant. This reduces the number of generated instructions by a tiny bit. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
When both argument of brcond/movcond/setcond are the same or when one of the two values is a constant equal to zero, it's possible to do further optimizations. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Now that it's possible to detect copies, we can optimize the case the "op r, a, a => movi r, 0". This helps in the computation of overflow flags when one of the two args is 0. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Now that we can easily detect all copies, we can optimize the "op r, a, a => mov r, a" case a bit more. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
It is possible to due copy propagation for all operations, even the one that have side effects or clobber arguments (it only concerns input arguments). That said, the call operation should be handled differently due to the variable number of arguments. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
The copy propagation pass tries to keep track what is a copy of what and what has copy of what, and in addition it keep a circular list of of all the copies. Unfortunately this doesn't fully work: a mov from a temp which has a state "COPY" changed it into a state "HAS_COPY". Later when this temp is used again, it is considered has not having copy and thus no propagation is done. This patch fixes that by removing the hiearchy between copies, and thus only keeping a "COPY" state both meaning "is a copy" and "has a copy". The decision of which copy to use is deferred to the actual temp replacement. At this stage there is not one best choice to do, but only better choices than others. For doing the best choice the operation would have to be parsed in reversed to know if a temp is going to be used later or not. That what is done by the liveness analysis. At this stage it is known that globals will be always live, that local temps will be dead at the end of the translation block, and that the temps will be dead at the end of the basic block. This means that this stage should try to replace temps by local temps or globals and local temps by globals. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
The copy propagation doesn't check the types of the temps during copy propagation. However TCG is using the mov_i32 for the i64 to i32 conversion and thus the two are not equivalent. With this patch tcg_opt_gen_mov() doesn't consider two temps of different type as copies anymore. So far it seems the optimization was not aggressive enough to trigger this bug, but it will be triggered later in this series once the copy propagation is improved. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-