- 12 5月, 2017 2 次提交
-
-
由 Igor Mammedov 提交于
CPUState::numa_node is still in use but now it's set by board when it creates CPU objects. So there isn't any need to set it again after all CPU's are created, since it's been already set. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAndrew Jones <drjones@redhat.com> Message-Id: <1494415802-227633-14-git-send-email-imammedo@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Igor Mammedov 提交于
Originally CPU threads were by default assigned in round-robin fashion. However it was causing issues in guest since CPU threads from the same socket/core could be placed on different NUMA nodes. Commit fb43b73b (pc: fix default VCPU to NUMA node mapping) fixed it by grouping threads within a socket on the same node introducing cpu_index_to_socket_id() callback and commit 20bb648d (spapr: Fix default NUMA node allocation for threads) reused callback to fix similar issues for SPAPR machine even though socket doesn't make much sense there. As result QEMU ended up having 3 default distribution rules used by 3 targets /virt-arm, spapr, pc/. In effort of moving NUMA mapping for CPUs into possible_cpus, generalize default mapping in numa.c by making boards decide on default mapping and let them explicitly tell generic numa code to which node a CPU thread belongs to by replacing cpu_index_to_socket_id() with @cpu_index_to_instance_props() which provides default node_id assigned by board to specified cpu_index. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <1494415802-227633-2-git-send-email-imammedo@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
- 05 5月, 2017 2 次提交
-
-
由 Thomas Huth 提交于
Since 'hax' is a possible accelerator nowadays, too, the '-accel' option should support it and we should mention this accelerator in the documentation, too. Signed-off-by: NThomas Huth <thuth@redhat.com> Message-Id: <1493875481-16388-1-git-send-email-thuth@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Thomas Huth 提交于
If the user needs to specify the disk geometry, the corresponding parameters of the "-device ide-hd" option should be used instead. "-hdachs" is considered as deprecated and might be removed soon. Signed-off-by: NThomas Huth <thuth@redhat.com> Message-Id: <1493270454-1448-1-git-send-email-thuth@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 04 5月, 2017 1 次提交
-
-
由 Marc-André Lureau 提交于
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
-
- 27 4月, 2017 1 次提交
-
-
由 Thomas Huth 提交于
If the user needs to specify the disk geometry, the corresponding parameters of the "-device ide-hd" option should be used instead. "-hdachs" is considered as deprecated and might be removed soon. Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 22 4月, 2017 1 次提交
-
-
由 Paul Durrant 提交于
This patch adds a command-line option (-xen-domid-restrict) which will use the new libxendevicemodel API to restrict devicemodel [1] operations to the specified domid. (Such operations are not applicable to the xenpv machine type). This patch also adds a tracepoint to allow successful enabling of the restriction to be monitored. [1] I.e. operations issued by libxendevicemodel. Operation issued by other xen libraries (e.g. libxenforeignmemory) are currently still unrestricted but this will be rectified by subsequent patches. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>
-
- 14 3月, 2017 1 次提交
-
-
由 Paolo Bonzini 提交于
This optimization is not necessary anymore, because the vCPU now drops the I/O thread lock even with TCG. Drop it to simplify the code and avoid the "I/O thread spun for 1000 iterations" warning. Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 09 3月, 2017 1 次提交
-
-
由 Alex Bennée 提交于
The sense of the test was inverted. Make it simple, if icount is enabled then we disabled MTTCG by default. If the user tries to force MTTCG upon us then we tell them "no". Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
- 07 3月, 2017 1 次提交
-
-
由 Markus Armbruster 提交于
The new command line option -blockdev works like QMP command blockdev-add. The option argument may be given in JSON syntax, exactly as in QMP. Example usage: -blockdev '{"node-name": "foo", "driver": "raw", "file": {"driver": "file", "filename": "foo.img"} }' The JSON argument doesn't exactly blend into the existing option syntax, so the traditional KEY=VALUE,... syntax is also supported, using dotted keys to do the nesting: -blockdev node-name=foo,driver=raw,file.driver=file,file.filename=foo.img This does not yet support lists, but that will be addressed shortly. Note that calling qmp_blockdev_add() (say via qmp_marshal_block_add()) right away would crash. We need to stash the configuration for later instead. This is crudely done, and bypasses QemuOpts, even though storing configuration is what QemuOpts is for. Need to revamp option infrastructure to support QAPI types like BlockdevOptions. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-Id: <1488317230-26248-22-git-send-email-armbru@redhat.com>
-
- 05 3月, 2017 1 次提交
-
-
由 Markus Armbruster 提交于
The way we get QMP commands registered is high tech: * qapi-commands.py generates qmp_init_marshal() that does the actual work * it also generates the magic to register it as a MODULE_INIT_QAPI function, so it runs when someone calls module_call_init(MODULE_INIT_QAPI) * main() calls module_call_init() QEMU needs to register a few non-qapified commands. Same high tech works: monitor.c has its own qmp_init_marshal() along with the magic to make it run in module_call_init(MODULE_INIT_QAPI). QEMU also needs to unregister commands that are not wanted in this build's configuration (commit 5032a16d). Simple enough: qmp_unregister_commands_hack(). The difficulty is to make it run after the generated qmp_init_marshal(). We can't simply run it in monitor.c's qmp_init_marshal(), because the order in which the registered functions run is indeterminate. So qmp_init_marshal() registers qmp_unregister_commands_hack() separately. Since registering *appends* to the list of registered functions, this will make it run after all the functions that have been registered already. I suspect it takes a long and expensive computer science education to not find this silly. Dumb it down as follows: * Drop MODULE_INIT_QAPI entirely * Give the generated qmp_init_marshal() external linkage. * Call it instead of module_call_init(MODULE_INIT_QAPI) * Except in QEMU proper, call new monitor_init_qmp_commands() that in turn calls the generated qmp_init_marshal(), registers the additional commands and unregisters the unwanted ones. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
-
- 03 3月, 2017 2 次提交
-
-
由 Hervé Poussineau 提交于
In commit af6bf132 (May 2011), ide-hd, ide-cd and scsi-cd have been added to disable default cdrom, "or else you can't put one on secondary master without -nodefaults". Make it the same for scsi-hd, so you can put one on scsi-id 2 without using -nodefaults. scsi-hd has probably been forgotten, as it has been added in the preceding commit (b443ae67). Affected users are the ones using a machine with SCSI devices and start QEMU with -device scsi-hd but without -device scsi-cd or -cdrom In that case, the default cdrom device will disappear instead of being empty. Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> Message-Id: <1487623279-29930-1-git-send-email-hpoussin@reactos.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Anton Nefedov 提交于
Signed-off-by: NAnton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Eric Blake <eblake@redhat.com> Message-Id: <1487614915-18710-3-git-send-email-den@openvz.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 24 2月, 2017 1 次提交
-
-
由 KONRAD Frederic 提交于
We know there will be cases where MTTCG won't work until additional work is done in the front/back ends to support. It will however be useful to be able to turn it on. As a result MTTCG will default to off unless the combination is supported. However the user can turn it on for the sake of testing. Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com> [AJB: move to -accel tcg,thread=multi|single, defaults] Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
- 22 2月, 2017 1 次提交
-
-
由 Igor Mammedov 提交于
Generic helper machine_query_hotpluggable_cpus() replaced target specific query_hotpluggable_cpus() callbacks so there is no need in it anymore. However inon NULL callback value is used to detect/report hotpluggable cpus support, therefore it can be removed completely. Replace it with MachineClass.has_hotpluggable_cpus boolean which is sufficient for the task. Suggested-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 21 2月, 2017 2 次提交
-
-
由 Markus Armbruster 提交于
Block backends defined with "-drive if=T" with T other than "none" are meant to be picked up by machine initialization code: a suitable frontend gets created and wired up automatically. Drives defined with if=scsi are also picked up by SCSI HBAs added with -device, unlike other interface types. Deprecate this usage, as follows. Create the frontends for onboard HBAs in machine initialization code, exactly like we do for if=ide and other interface types. Change scsi_legacy_handle_cmdline() to create a frontend only when it's still missing, and warn that this usage is deprecated. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
-
由 Markus Armbruster 提交于
The logic to create frontends for -drive if=scsi is in SCSI HBAs. For all other interface types, it's in machine initialization code. A few machine types create the SCSI HBAs necessary for that. That's also not done for other interface types. I'm going to deprecate these SCSI eccentricities. In preparation for that, create the frontends in main() instead of the SCSI HBAs, by calling new function scsi_legacy_handle_cmdline() there. Note that not all SCSI HBAs create frontends. Take care not to change that. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <1487161136-9018-2-git-send-email-armbru@redhat.com> Acked-By: NPaolo Bonzini <pbonzini@redhat.com>
-
- 16 2月, 2017 4 次提交
-
-
由 Anton Nefedov 提交于
There is a suitable log mask for the purpose. Signed-off-by: NAnton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Message-Id: <1487053524-18674-4-git-send-email-den@openvz.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Anton Nefedov 提交于
it's not very convenient to use the crash-information property interface, so provide a CPU class callback to get the guest crash information, and pass that information in the event Signed-off-by: NAnton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Dou Liyang 提交于
At the Qemu initialization, we call the cpu_synchronize_all_post_init() to synchronize All CPU states to KVM in the ./vl.c::main(). Currently, it is called before we initialize the CPUs, which is created by "-device" command and parsed by generic devices initialization, So, these CPUs may be ignored to synchronize. The patch moves the cpu_synchronize_all_post_init func after generic devices initialization to make sure that all the CPUs can be included. Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com> Message-Id: <1485916178-17838-1-git-send-email-douly.fnst@cn.fujitsu.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Acked-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Claudio Imbrenda 提交于
This patch: * moves vm_start to cpus.c. * exports qemu_vmstop_requested, since it's needed by vm_start. * extracts vm_prepare_start from vm_start; it does what vm_start did, except restarting the cpus. * vm_start now calls vm_prepare_start and then restarts the cpus. Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com> Message-Id: <1487092068-16562-2-git-send-email-imbrenda@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 01 2月, 2017 1 次提交
-
-
由 Daniel P. Berrange 提交于
Introduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file. The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir. Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-7-berrange@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 28 1月, 2017 4 次提交
-
-
由 Marc-André Lureau 提交于
Turn Chardev into Object. qemu_chr_alloc() is replaced by the qemu_chardev_new() constructor. It will call qemu_char_open() to open/intialize the chardev with the ChardevCommon *backend settings. The CharDriver::create() callback is turned into a ChardevClass::open() which is called from the newly introduced qemu_chardev_open(). "chardev-gdb" and "chardev-hci" are internal chardev and aren't creatable directly with -chardev. Use a new internal flag to disable them. We may want to use TYPE_USER_CREATABLE interface instead, or perhaps allow -chardev usage. Although in general we keep typename and macros private, unless the type is being used by some other file, in this patch, all types and common helper macros for qemu-char.c are in char.h. This is to help transition now (some types must be declared early, while some aren't shared) and when splitting in several units. This is to be improved later. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marc-André Lureau 提交于
Pick a uniform chardev type name. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Lieven 提交于
commit f57b4b5f moved qemu_iscsi_opts into vl.c. This made them invisible for qemu-img, qemu-nbd etc. Fixes: f57b4b5f Cc: qemu-stable@nongnu.org Signed-off-by: NPeter Lieven <pl@kamp.de> Message-Id: <1485262161-18543-1-git-send-email-pl@kamp.de> [Drop useless #ifdef. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Pavel Dovgalyuk 提交于
This patch implements initial vmstate creation or loading at the start of record/replay. It is needed for rewinding the execution in the replay mode. v4 changes: - snapshots are not created by default anymore v3 changes: - added rrsnapshot option Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170124071746.4572.61449.stgit@PASHA-ISP> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 25 1月, 2017 1 次提交
-
-
由 Ashijeet Acharya 提交于
Add a new option "--only-migratable" in qemu which will allow to add only those devices which will not fail qemu after migration. Devices set with the flag 'unmigratable' cannot be added when this option will be used. Signed-off-by: NAshijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-3-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
- 24 1月, 2017 2 次提交
-
-
由 Eduardo Habkost 提交于
The existing default_config_files table in arch_init.c has a single entry, making it completely unnecessary. The whole code can be replaced by a single qemu_read_config_file() call in vl.c. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170117180051.11958-1-ehabkost@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Dou Liyang 提交于
In the numa_post_machine_init(), we use CPU_FOREACH macro to set all CPUs' namu_node. So, we should make sure that we call it after Qemu has already initialied all the CPUs. As we all know, the CPUs can be created by "-smp"(pc_new_cpu) or "-device"(qdev_device_add) command. But, before the device init, Qemu execute the numa_post_machine_init earlier. It makes the mapping of NUMA nodes and CPUs incorrect. The patch move the numa_post_machine_init func in the appropriate location. Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com> Message-Id: <1484664152-24446-2-git-send-email-douly.fnst@cn.fujitsu.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
- 20 1月, 2017 1 次提交
-
-
由 Vincent Palatin 提交于
Use the Intel HAX is kernel-based hardware acceleration module for Windows (similar to KVM on Linux). Based on the "target/i386: Add Intel HAX to android emulator" patch from David Chou <david.j.chou@intel.com> Signed-off-by: NVincent Palatin <vpalatin@chromium.org> Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org> [Drop hax_populate_ram stub. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 17 1月, 2017 3 次提交
-
-
由 Paolo Bonzini 提交于
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub instead, so that -acpitable can be later extended to ARM. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
They are small, it is not worth stubbing them. Just include them in user-mode emulators and unit tests as well. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Leif Lindholm 提交于
-smbios command line options were accepted but silently ignored on TARGET_ARM, due to a test for TARGET_I386 in arch_init.c. Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub instead, enabled for all targets without CONFIG_SMBIOS. Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org> Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 13 1月, 2017 1 次提交
-
-
由 Igor Mammedov 提交于
so it won't impose an additional limits on max_cpus limits supported by different targets. It removes global MAX_CPUMASK_BITS constant and need to bump it up whenever max_cpus is being increased for a target above MAX_CPUMASK_BITS value. Use runtime max_cpus value instead to allocate sufficiently sized node_cpu bitmasks in numa parser. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <1479466974-249781-1-git-send-email-imammedo@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> [ehabkost: Added asserts to ensure cpu_index < max_cpus] Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
- 06 1月, 2017 1 次提交
-
-
由 Pavel Dovgalyuk 提交于
This patch adds support of recording and replaying network packets in irount rr mode. Record and replay for network interactions is performed with the network filter. Each backend must have its own instance of the replay filter as follows: -netdev user,id=net1 -device rtl8139,netdev=net1 -object filter-replay,id=replay,netdev=net1 Replay network filter is used to record and replay network packets. While recording the virtual machine this filter puts all packets coming from the outer world into the log. In replay mode packets from the log are injected into the network device. All interactions with network backend in replay mode are disabled. v5 changes: - using iov_to_buf function instead of loop Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 09 11月, 2016 1 次提交
-
-
由 Michael Tokarev 提交于
With current code, pid file is open after various sockets, chardevs, fsdevs and the like. This causes interesting effects, for example when monitor is a unix-socket, and another qemu instance is already running, new qemu first "damages" the socket and next complain that it can't acquire the pid file and exits, making running qemu unreachable. Move pid file creation earlier, right after the call to os_daemonize(), where we know our process id (pid). Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru> Message-Id: <1478096330-18081-1-git-send-email-mjt@msgid.tls.msk.ru> Reviewed-by: NDaniel P. Berrange <berrange@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 02 11月, 2016 1 次提交
-
-
由 Christian Borntraeger 提交于
For automated testing purposes it can be helpful to exit qemu (poweroff) when the guest panics. Make this the default unless -no-shutdown is specified. For internal-errors like errors from KVM_RUN the behaviour is not changed, in other words QEMU does not exit to allow debugging in the QEMU monitor. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1476775794-108012-1-git-send-email-borntraeger@de.ibm.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 30 10月, 2016 2 次提交
-
-
由 zhanghailiang 提交于
Guest will enter this state when paused to save/restore VM state under COLO checkpoint. Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAmit Shah <amit@amitshah.net>
-
由 zhanghailiang 提交于
We can determine whether or not VM in destination should go into COLO mode by referring to the info that was migrated. We skip this section if COLO is not enabled (i.e. migrate_set_capability colo off), so that, It doesn't break compatibility with migration no matter whether users configure the --enable-colo/disable-colo on the source/destination side or not; Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAmit Shah <amit@amitshah.net>
-
- 28 10月, 2016 1 次提交
-
-
由 Anand J 提交于
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NAnand J <anand.indukala@gmail.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-