qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.

This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We can always assume raw, file and qcow2 being available; so do not use
bdrv_find_format() to locate their BlockDriver objects but statically
reference the respective objects.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

After reading the extension header, offset is incremented, but not
checked against end_offset any more. This way an integer overflow could
happen when checking whether the extension end is within the allowed
range, effectively disabling the check.

This patch adds the missing check and a test case for it.

Cc: qemu-stable@nongnu.org
Reported-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The only really time-consuming operation potentially performed by
qcow2_amend_options() is zero cluster expansion when downgrading qcow2
images from compat=1.1 to compat=0.10, so report status of that
operation and that operation only through the status CB.

For this, approximate the progress as the number of L1 entries visited
during the operation.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-5-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.

Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.

A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.

If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).

[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Implement this function by making all clusters in the image file fall
through to the backing file (by using the recently extended discard).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-3-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Normally, discarded sectors should read back as zero. However, there are
cases in which a sector (or rather cluster) should be discarded as if
they were never written in the first place, that is, reading them should
fall through to the backing file again.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-2-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

With BDRVQcowState.refcount_block_bits, we don't need REFCOUNT_SHIFT
anymore.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When opening dirty images, qcow2's repair function should not only
repair errors but leaks as well.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The size of a refblock entry is (in theory) variable; calculate
therefore the number of entries per refblock and the according bit shift
(1 << x == entry count) when opening an image.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

device_name[] can become non-empty only in bdrv_new_root() and
bdrv_move_feature_fields().  The latter is used only to undo damage
done by bdrv_swap().  The former is called only by blk_new_with_bs().
Therefore, when a BlockDriverState's device_name[] is non-empty, then
it's been created with a BlockBackend, and vice versa.  Furthermore,
blk_new_with_bs() keeps the two names equal.

Therefore, device_name[] is redundant.  Eliminate it.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Just like lazy-refcounts, this field will be present iff the qcow2
compat level is 1.1 (or probably any future revision).

As expected, this breaks some tests due to the new field present in
qemu-img info output; so fix their output accordingly.
Suggested-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Being able to set the overlap-check option to a string and then refine
it via the overlap-check.* options is a nice idea for the command line
but does not work so well for non-flattened dicts. In that case, one can
only specify either but not both, so add a field to overlap-check.*
which does the same as directly specifying overlap-check but can be used
in conjunction with the other fields in non-flattened dicts.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1408557576-14574-4-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Currently, the QemuOpts object opts is leaked if anything fails from its
creation up to and including the image repair block. Fix this by freeing
that object in the fail path.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Message-id: 1408557576-14574-2-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Add a helper function for easily marking an image corrupt (on fatal
corruptions) while outputting an informative message to stderr and via
QAPI.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Message-id: 1409926039-29044-3-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

preallocation=falloc allocates disk space by posix_fallocate(),
preallocation=full allocates disk space by writing zeros to disk.
Both modes imply preallocation=metadata.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch prepares for the subsequent patches.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

and avoid converting it back later.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.

This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add options for specifying the size of the metadata caches. This can
either be done directly for each cache (if only one is given, the other
will be derived according to a default ratio) or combined for both.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Specifying the metadata cache sizes in clusters results in less clusters
(and much less bytes) covered for small cluster sizes and vice versa.
Using a constant byte size reduces this difference, and makes it
possible to manually specify the cache size in an easily comprehensible
unit.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.

This patch addresses the allocations in the qcow2 block driver.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

It returns a multiple of the sector size.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of bdrv_getlength().

Aside: a few of these callers don't handle errors.  I didn't
investigate whether they should.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.

Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.

This fixes https://bugs.launchpad.net/qemu/+bug/1342704/Reported-by: NMaria Kustova <maria.k@catit.be>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If a qcow2 image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.

This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).

This is obvious nonsense and should be rejected.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Introduced in commit 5a8a30db.  Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Instead of blindly relying on a normal integer having a width of 32 bits
(which is a pretty good assumption, but we should not rely on it if
there is no need), use the correct format string macros.

This does not touch DEBUG output.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If lazy refcounts are enabled for a backing file, committing to this
backing file may leave it in a dirty state even if the commit succeeds.
The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush
refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare()
doesn't take care to flush metadata.

In order to fix this, this patch also fixes qcow2_mark_clean(), which
contains another ineffective bdrv_flush() call beause lazy refcounts are
disabled only afterwards. All existing callers of qcow2_mark_clean()
either don't modify refcounts or already flush manually, so that this
fixes only a latent, but not yet actually triggerable bug.

Another instance of the same problem is live snapshots. Again, a real
corruption is prevented by an explicit flush for non-read-only images in
external_snapshot_prepare(), but images using lazy refcounts stay dirty.

Cc: qemu-stable@nongnu.org
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

preallocate() only links the first QCowL2Meta's data clusters into the
L2 table and ignores any chained QCowL2Metas in the linked list.

Chains of QCowL2Meta structs are built up when contiguous clusters span
L2 tables.  Each QCowL2Meta describes one L2 table update.  This is a
rare case in preallocate() but can happen.

This patch fixes preallocate() by iterating over the whole list of
QCowL2Metas.  Compare with the qcow2_co_writev() function's
implementation, which is similar but also also handles request
dependencies.  preallocate() only performs one allocation at a time so
there can be no dependencies.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This avoids an unbounded allocation.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The qcow2 code assumes that s->snapshots is non-NULL if s->nb_snapshots
!= 0. By having the initialisation of both fields separated in
qcow2_open(), any error occuring in between would cause the error path
to dereference NULL in qcow2_free_snapshots() if the image had any
snapshots.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If the size becomes larger than what qcow2_open() would accept, fail the
growing operation.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>