Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
切换分支/标签
  1. 06 7月, 2016 12 次提交
    • E
      qapi: Add new visit_complete() function · 3b098d56
      由 Eric Blake 提交于 
      Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base.  Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors.  For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.

This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).

Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.

The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.

Generated code is simplified as follows for events:

|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
|     QDict *qmp;
|     Error *err = NULL;
|     QMPEventFuncEmit emit;
|-    QmpOutputVisitor *qov;
|+    QObject *obj;
|     Visitor *v;
|     q_obj_ACPI_DEVICE_OST_arg param = {
|         info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
|     qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|-    qov = qmp_output_visitor_new();
|-    v = qmp_output_get_visitor(qov);
|+    v = qmp_output_visitor_new(&obj);
|
|     visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
|     if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
|         goto out;
|     }
|
|-    qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+    visit_complete(v, &obj);
|+    qdict_put_obj(qmp, "data", obj);
|     emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);

and for commands:

| {
|     Error *err = NULL;
|-    QmpOutputVisitor *qov = qmp_output_visitor_new();
|     Visitor *v;
|
|-    v = qmp_output_get_visitor(qov);
|+    v = qmp_output_visitor_new(ret_out);
|     visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|-    if (err) {
|-        goto out;
|+    if (!err) {
|+        visit_complete(v, ret_out);
|     }
|-    *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
|     error_propagate(errp, err);
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      3b098d56
    • E
      tests: Factor out common code in qapi output tests · 23d1705f
      由 Eric Blake 提交于 
      Create a new visitor_get() function to capture common
actions taken in collecting output from an output visitor,
to make it easier to refactor the output visitors in a
later patch.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-12-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      23d1705f
    • E
      tests: Clean up test-string-output-visitor · a8fff94d
      由 Eric Blake 提交于 
      Use &error_abort and error_free_or_abort() in more places, use
the generated qapi_free_intList() instead of open-coding it,
reduce the scope of some variables, avoid code duplication
during test setup with visitor_output_setup_internal(), and
copy the visitor_reset() concept from the qmp-output test to
the string-output test.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-11-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      a8fff94d
    • E
      qmp-output-visitor: Favor new visit_free() function · 1830f22a
      由 Eric Blake 提交于 
      Now that we have a polymorphic visit_free(), we no longer need
qmp_output_visitor_cleanup(); however, we still need to
expose the subtype for qmp_output_get_qobject().
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      1830f22a
    • E
      string-output-visitor: Favor new visit_free() function · e7ca5656
      由 Eric Blake 提交于 
      Now that we have a polymorphic visit_free(), we no longer need
string_output_visitor_cleanup(); however, we still need to
expose the subtype for string_output_get_string().
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      e7ca5656
    • E
      qmp-input-visitor: Favor new visit_free() function · b70ce101
      由 Eric Blake 提交于 
      Now that we have a polymorphic visit_free(), we no longer need
qmp_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from qmp_input_visitor_new() nor a
public upcast function.

Generated code changes to qmp-marshal.c look like:

|@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb
| {
|     Error *err = NULL;
|     AddfdInfo *retval;
|-    QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true);
|     Visitor *v;
|     q_obj_add_fd_arg arg = {0};
|
|-    v = qmp_input_get_visitor(qiv);
|+    v = qmp_input_visitor_new(QOBJECT(args), true);
|     visit_start_struct(v, NULL, NULL, 0, &err);
|     if (err) {
|         goto out;
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      b70ce101
    • E
      string-input-visitor: Favor new visit_free() function · 7a0525c7
      由 Eric Blake 提交于 
      Now that we have a polymorphic visit_free(), we no longer need
string_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from string_input_visitor_new() nor a
public upcast function.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-7-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      7a0525c7
    • E
      opts-visitor: Favor new visit_free() function · 09204eac
      由 Eric Blake 提交于 
      Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      09204eac
    • E
      qapi: Add new visit_free() function · 2c0ef9f4
      由 Eric Blake 提交于 
      Making each visitor provide its own (awkwardly-named) FOO_cleanup()
is unusual, when we can instead have a polymorphic visit_free()
interface.  Over the next few patches, we can use the polymorphic
functions to eliminate the need for a FOO_get_visitor() function
for accessing specific visitor functionality, once everything can
be accessed directly through the Visitor* interfaces.

The dealloc visitor is the first one converted to completely use
the new entry point, since qapi_dealloc_visitor_cleanup() was the
only reason that qapi_dealloc_get_visitor() existed, and only
generated and testsuite code was even using it.  With the new
visit_free() entry point in place, we no longer need to expose
the QapiDeallocVisitor subtype through qapi_dealloc_visitor_new(),
and can get by with less generated code, with diffs that look like:

| void qapi_free_ACPIOSTInfo(ACPIOSTInfo *obj)
| {
|-    QapiDeallocVisitor *qdv;
|     Visitor *v;
|
|     if (!obj) {
|         return;
|     }
|
|-    qdv = qapi_dealloc_visitor_new();
|-    v = qapi_dealloc_get_visitor(qdv);
|+    v = qapi_dealloc_visitor_new();
|     visit_type_ACPIOSTInfo(v, NULL, &obj, NULL);
|-    qapi_dealloc_visitor_cleanup(qdv);
|+    visit_free(v);
|}
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-5-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      2c0ef9f4
    • E
      qapi: Add parameter to visit_end_* · 1158bb2a
      由 Eric Blake 提交于 
      Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*.  The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL.  The dealloc visitor is then greatly simplified.

All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**.  This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.

For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      1158bb2a
    • E
      qemu-img: Don't leak errors when outputting JSON · 911ee36d
      由 Eric Blake 提交于 
      If our JSON output ever encounters an error, we would just silently
leak the error object.  Instead, assert that our usage won't fail.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-3-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      911ee36d
    • E
      qapi: Improve use of qmp/types.h · c7eb39cb
      由 Eric Blake 提交于 
      'qjson.h' is not a QObject subtype; include this file directly in
.c files that are using it, rather than abusing qmp/types.h for
that purpose.

Meanwhile, for files that include a list of individual QObject
subtypes, it's easier to just use qmp/types.h for that purpose.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-2-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      c7eb39cb
  3. 05 7月, 2016 28 次提交