- 18 3月, 2010 7 次提交
-
-
由 Paolo Bonzini 提交于
Make the timer subsystem register its own callback instead. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Instead of testing specially next_cpu in host_alarm_handler, just do that in qemu_notify_event. The idea is, if we are not running (or not yet running) target CPU code, prepare things so that the execution loop is exited asap; just make that clear. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
qemu_notify_event in the non-iothread case is only stopping the current CPU. However, if the CPU is idle and the main loop is in the select call then a call to qemu_event_increment is needed too (as done in host_alarm_handler). Since in general one doesn't know whether the CPU is executing or not, it is a safe bet to always do qemu_event_increment. Another way to see it: after this patch qemu_event_increment is the "common part" of qemu_notify_event for both the CONFIG_IOTHREAD and !CONFIG_IOTHREAD cases, which makes sense. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
The timer_alarm_pending variable is related to the alarm timer but not placed in the struct. Also, in qemu_mod_timer the wrong flag was being tested: the timer is rearmed in the alarm timer "bottom half", so the right flag to test there is the "pending" flag. Finally, I hoisted the NULL checks from alarm_has_dynticks to host_alarm_handler. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
The ALARM_FLAG_DYNTICKS can be testing simply by checking if there is a rearm function. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
The TIME_ONESHOT and TIME_PERIODIC flags are mutually exclusive. The code after the patch matches the flags used in win32_start_timer. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
The code is initializing an unsigned int to UINT_MAX using "-1", so that the following always-true comparison seems to be always-false at a first look. Since alarm timer initializations are never nested, it is simpler to unconditionally store the result of timeGetDevCaps into data->period. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 3月, 2010 1 次提交
-
-
由 Markus Armbruster 提交于
We sometimes permit omitting the first option name, for example -device foo is short for -device driver=foo. The name to use ("driver" in the example) is passed as argument to qemu_opts_parse(). For each QemuOptsList, we use at most one such name. Move the name into QemuOptsList, and pass whether to permit the abbreviation. This ensures continued consistency, and simplifies the commit after next in this series.
-
- 16 3月, 2010 6 次提交
-
-
由 Markus Armbruster 提交于
New LOC_CMDLINE. Use it for tracking option with argument in lookup_opt(). We now report errors like this qemu: -device smbus-eeprom: Did not find I2C bus for smbus-eeprom
-
由 Markus Armbruster 提交于
New LOC_FILE. Use it for tracking file name and line number in qemu_config_parse(). We now report errors like qemu:foo.conf:42: Did not find I2C bus for smbus-eeprom In particular, gems like this message: -device: no driver specified become almost nice now: qemu:foo.conf:44: -device: no driver specified (A later commit will get rid of the bogus -device:)
-
由 Markus Armbruster 提交于
-
由 Markus Armbruster 提交于
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
-
由 Markus Armbruster 提交于
qemu_error_sink can either point to a monitor or a file. In practice, it always points to the current monitor if we have one, else to stderr. Simply route errors to the current monitor or else to stderr, and remove qemu_error_sink along with the functions to control it. Actually, the old code switches the sink slightly later, in handle_user_command() and handle_qmp_command(), than it gets switched now, implicitly, by setting the current monitor in monitor_read() and monitor_control_read(). Likewise, it switches back slightly earlier (same places). Doesn't make a difference, because there are no calls of qemu_error() in between.
-
由 Markus Armbruster 提交于
A monitor may not even exist. Change load_vmstate() to use qemu_error() instead of monitor_printf(). Parameter mon is now unused, remove it.
-
- 15 3月, 2010 1 次提交
-
-
由 Jan Kiszka 提交于
This fixes eg. "-nographic -serial mon:stdio [-serial ...]". Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 10 3月, 2010 1 次提交
-
-
由 Luiz Capitulino 提交于
Something bad has happened in the merge of commit 0ee44250, as the log message says it's supposed to be in qemu_system_reset() but it is do_vm_stop(). Possibly, it was a problem with the conflict resolution with ea375f9a (which has been merged first). This commit moves (again) the RESET event into qemu_system_reset(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 3月, 2010 4 次提交
-
-
由 Luiz Capitulino 提交于
Emitted whenever the RTC time changes. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This event has been introduced in the first round of QMP commits, turns out that it's based on the usage of the EXCP_DEBUG macro, which has discussable semantics when exposed through QMP. As libvirt doesn't use this, let's just drop it. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Nothing will change as that function is currently only called by the main loop code, but it's the right place for the RESET event, as it's where the reset is actually performed. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
I've introduced the STOP event in the main loop, this is wrong as it will be only emitted if the io thread is enabled. This fixes that by moving the STOP event to do_vm_stop(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 3月, 2010 2 次提交
-
-
由 Jan Kiszka 提交于
This grand cleanup drops all reset and vmsave/load related synchronization points in favor of four(!) generic hooks: - cpu_synchronize_all_states in qemu_savevm_state_complete (initial sync from kernel before vmsave) - cpu_synchronize_all_post_init in qemu_loadvm_state (writeback after vmload) - cpu_synchronize_all_post_init in main after machine init - cpu_synchronize_all_post_reset in qemu_system_reset (writeback after system reset) These writeback points + the existing one of VCPU exec after cpu_synchronize_state map on three levels of writeback: - KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run) - KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped) - KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well) This level is passed to the arch-specific VCPU state writing function that will decide which concrete substates need to be written. That way, no writer of load, save or reset functions that interact with in-kernel KVM states will ever have to worry about synchronization again. That also means that a lot of reasons for races, segfaults and deadlocks are eliminated. cpu_synchronize_state remains untouched, just as Anthony suggested. We continue to need it before reading or writing of VCPU states that are also tracked by in-kernel KVM subsystems. Consequently, this patch removes many cpu_synchronize_state calls that are now redundant, just like remaining explicit register syncs. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Port qemu-kvm's -mem-path and -mem-prealloc options. These are useful for backing guest memory with huge pages via hugetlbfs. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> CC: john cooper <john.cooper@redhat.com>
-
- 23 2月, 2010 1 次提交
-
-
由 john cooper 提交于
This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: Njohn cooper <john.cooper@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 2月, 2010 3 次提交
-
-
由 Marcelo Tosatti 提交于
Change the way the internal qemu signal, used for communication between iothread and vcpus, is handled. Block and consume it with sigtimedwait on the outer vcpu loop, which allows more precise timing control. Change from standard signal (SIGUSR1) to real-time one, so multiple signals are not collapsed. Set the signal number on KVM's in-kernel allowed sigmask. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
In KVM mode the global mutex is released when vcpus are executing, which means acquiring the fairness mutex is not required. Also for KVM there is one thread per vcpu, so tcg_has_work is meaningless. Add a new qemu_wait_io_event_common function to hold common code between TCG/KVM. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Otherwise a vcpu thread can run the sigchild handler causing waitpid() from iothread to fail. Signed-off-by: NMarcelo Tosatti <mtosa...@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 20 2月, 2010 4 次提交
-
-
由 Paolo Bonzini 提交于
Moving stuff in console.c to avoid the need for prototypes makes this patch a bit bigger, but there's no change in the code. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Let register_displayallocator hand over the old width/height to the new allocator. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Ensure initialization of a dumb display, if needed, by making all accesses go through get_displaystate. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Call it right after -device devices get created. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 2月, 2010 1 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 11 2月, 2010 3 次提交
-
-
由 Marcelo Tosatti 提交于
Round robin vcpus in tcg_cpu_next even if the vm stopped. This allows all cpus to enter stopped state. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Same as what qemu-kvm does. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
No need to loop if less than a full buffer is read, the next read would return EAGAIN. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 2月, 2010 1 次提交
-
-
由 Paolo Bonzini 提交于
Some places use get_clock directly because they want to access the rt_clock with nanosecond precision. Add a function to do exactly that instead of using internal interfaces. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 08 2月, 2010 3 次提交
-
-
由 Paolo Bonzini 提交于
Similar to the qemu-img.c patch, but I also have to unescape remaining % signs in qemu-options.hx. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Paolo Bonzini 提交于
Since qemu-options.h is only used in vl.c, we can avoid using brittle interpolation from a generated file. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 07 2月, 2010 1 次提交
-
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 06 2月, 2010 1 次提交
-
-
由 Paolo Bonzini 提交于
This one is for 0.12 too. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-