As qtest_availble() returns 1 only when CONFIG_POSIX is set, keep
setting AccelClass.available to keep current behavior (this is different
from what we did for KVM and Xen).

This also allows us to make qtest_init_accel() static.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Note that this has an user-visible side-effect: instead of reporting
"Xen is not supported for this target", QEMU binaries not supporting Xen
will report "xen accelerator does not exist".

As xen_available() always return 1 when CONFIG_XEN is enabled, we don't
need to set AccelClass.available anymore. xen_enabled() is not being
removed yet, but only because vl.c is still using it.

This also allows us to make xen_init() static.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Note that this has an user-visible side-effect: instead of reporting
"KVM is not supported for this target", QEMU binaries not supporting KVM
will report "kvm accelerator does not exist".

As kvm_availble() always return 1 when CONFIG_KVM is enabled, we don't
need to set AccelClass.available anymore. kvm_enabled() is not being
completely removed yet only because qmp_query_kvm() still uses it.

This also allows us to make kvm_init() static.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As the accelerator classes won't be registered anymore if they are not
enabled at compile time, saying "does not exist" may be misleading, as
the accelerator may be simply disabled. Change the wording to just say
"not found".
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When we move accel classes outside accel.c, the available() function
won't be necessary anymore, because the classes will be registered only
if the accelerator code is really enabled at build time.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Instead of having a static AccelType array, register a class for each
accelerator type, and use class name lookup to find accelerator
information.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Just to make checkpatch.pl happy when moving the code.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It seems that it might be a good idea to know what is at the remote
end of a socket for tracking down issues.  So add that to the
socket filename.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Adds a "reconnect" option to socket backends that gives a reconnect
timeout.  This only applies to client sockets.  If the other end
of a socket closes the connection, qemu will attempt to reconnect
after the given number of seconds.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This way we can tell if the socket is connected or not.  It also splits
the string conversions out into separate functions to make this more
convenient.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This keeps them from having to be passed around and makes them
available for later functions, like printing and reconnecting.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move all socket configuration to qmp_chardev_open_socket().
qemu_chr_open_socket_fd() just opens the socket.  This is getting ready
for the reconnect code, which will call open_sock_fd() on a reconnect
attempt.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This update brings dataplane to virtio-scsi (NOT
yet 100% thread-safe, though, which makes it really, really
experimental.  It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi.  This
is a pretty important feature.  Almost all the work here
was done by Fam Zheng.

I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.

This pull request is using the new subkey 4E6B09D7.

# gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (39 commits)
  block/iscsi: handle failure on malloc of the allocationmap
  util: introduce bitmap_try_new
  virtio-scsi: Handle TMF request cancellation asynchronously
  scsi: Introduce scsi_req_cancel_async
  scsi: Introduce scsi_req_cancel_complete
  scsi: Drop SCSIReqOps.cancel_io
  scsi: Unify request unref in scsi_req_cancel
  scsi-generic: Handle canceled request in scsi_command_complete
  scsi: Drop scsi_req_abort
  virtio-scsi: Process ".iothread" property
  virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
  virtio-scsi: Batched prepare for cmd reqs
  virtio-scsi: Two stages processing of cmd request
  virtio-scsi: Add migration state notifier for dataplane code
  virtio-scsi: Hook up with dataplane
  virtio-scsi-dataplane: Code to run virtio-scsi on iothread
  virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
  virtio-scsi: Add 'iothread' property to virtio-scsi
  virtio: add a wrapper for virtio-backend initialization
  virtio-9p: fix virtio-9p child refcount in transports
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ac97: register reset via qom

# gpg: Signature made Tue 30 Sep 2014 12:32:29 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-20140930-1:
  ac97: register reset via qom
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pci, pc, virtio, misc bugfixes

A bunch of bugfixes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 29 Sep 2014 17:59:57 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vl: Adjust the place of calling mlockall to speedup VM's startup
  pc-dimm: Don't check dimm->node when there is non-NUMA config
  pci-hotplug-old: avoid losing error message
  Revert "virtio-pci: fix migration for pci bus master"
  loader: g_realloc(p, 0) frees and returns NULL, simplify
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

regular bitmap_new simply aborts if the memory allocation fails.
bitmap_try_new returns NULL on failure and allows for proper
error handling.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For VIRTIO_SCSI_T_TMF_ABORT_TASK and VIRTIO_SCSI_T_TMF_ABORT_TASK_SET,
use scsi_req_cancel_async to start the cancellation.

Because each tmf command may cancel multiple requests, we need to use a
counter to track the number of remaining requests we still need to wait
for.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Devices will call this function to start an asynchronous cancellation. The
bus->info->cancel will be called after the request is canceled.

Devices will probably need to track a separate TMF request that triggers this
cancellation, and wait until the cancellation is done before completing it. So
we store a notifier list in SCSIRequest and in scsi_req_cancel_complete we
notify them.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Let the aio cb do the clean up and notification job after scsi_req_cancel, in
preparation for asynchronous cancellation.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The only two implementations are identical to each other, with nothing specific
to device: they only call bdrv_aio_cancel with the SCSIRequest.aiocb.

Let's move it to scsi-bus.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Before, scsi_req_cancel will take ownership of the canceled request and unref
it. We did this because we didn't know whether AIO CB will be called or not
during the cancelling, so we set the io_canceled flag before calling it, and
skip unref in the potentially called callbacks, which is not very nice.

Now, bdrv_aio_cancel has a stricter contract that the completion callbacks are
always called, so we can remove the checks of req->io_canceled and just unref
it in callbacks.

It will also make implementing asynchronous cancellation easier.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that we always called the cb in bdrv_aio_cancel, let's make scsi-generic
callbacks check io_canceled flag similarly to scsi-disk.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The only user of this function is spapr_vscsi.c. We can convert to
scsi_req_cancel plus adding a check in vscsi_request_cancelled.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
[Drop prototype. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

tcg updates

# gpg: Signature made Mon 29 Sep 2014 19:58:04 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/tcg-next-201400729:
  tcg: Always enable TCGv type checking
  qemu/compiler: Define QEMU_ARTIFICIAL
  tcg-aarch64: Use 32-bit loads for qemu_ld_i32
  tcg-sparc: Use UMULXHI instruction
  tcg-sparc: Rename ADDX/SUBX insns
  tcg-sparc: Use ADDXC in setcond_i64
  tcg-sparc: Fix setcond_i32 uninitialized value
  tcg-sparc: Use ADDXC in addsub2_i64
  tcg-sparc: Support addsub2_i64
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm:
 * more EL2/EL3 preparation work
 * don't handle c15_cpar changes via tb_flush()
 * fix some unused function warnings in ARM devices
 * build the GDB XML for 32 bit CPUs into qemu-*-aarch64
 * implement guest breakpoint support

# gpg: Signature made Mon 29 Sep 2014 19:25:37 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140929:
  target-arm: Add support for VIRQ and VFIQ
  target-arm: Add IRQ and FIQ routing to EL2 and 3
  target-arm: A64: Emulate the SMC insn
  target-arm: Add a Hypervisor Trap exception type
  target-arm: A64: Emulate the HVC insn
  target-arm: A64: Correct updates to FAR and ESR on exceptions
  target-arm: Don't take interrupts targeting lower ELs
  target-arm: Break out exception masking to a separate func
  target-arm: A64: Refactor aarch64_cpu_do_interrupt
  target-arm: Add SCR_EL3
  target-arm: Add HCR_EL2
  target-arm: Don't handle c15_cpar changes via tb_flush()
  hw/input/tsc210x.c: Delete unused array tsc2101_rates
  hw/display/pxa2xx_lcd.c: Remove unused function pxa2xx_dma_rdst_set
  hw/intc/imx_avic.c: Remove unused function imx_avic_set_prio()
  hw/display/blizzard.c: Delete unused function blizzard_rgb2yuv
  configure: Build GDB XML for 32 bit ARM CPUs into qemu aarch64 binaries
  target-arm: Implement handling of breakpoint firing
  target-arm: Implement setting guest breakpoints
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We are ready, now let's effectively enable dataplane.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Queue the popped requests while calling
virtio_scsi_handle_cmd_req_prepare(), then submit them after all
prepared.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Mechanical change, in preparation for bdrv_io_plug/bdrv_io_unplug.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Similar to virtio-blk-dataplane, we stop the iothread while migration
starts and restart it when migration finishes.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This enables the virtio-scsi-dataplane code by setting the iothread
in virtio-scsi device, and makes any function that is called by
back from dataplane to cooperate with the caller: they need to be
vring/iothread aware when handling the requests and using scsi devices
on the bus.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This implements the core part of dataplane feature of virtio-scsi.

A few fields are added in VirtIOSCSICommon to maintain the dataplane
status. These fields are managed by a new source file:
virtio-scsi-dataplane.c.

Most code in this file will run on an iothread, unless otherwise
commented as in a global mutex context, such as those functions to
start, stop and setting the iothread property.

Upon start, we set up guest/host event notifiers, in a same way as
virtio-blk does. The handlers then pop request from vring and call into
virtio-scsi.c functions to process it. So we need to make sure make all
those called functions work with iothread, too.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move VirtIOSCSIReq to header and add one field "vring" as a wrapper
structure of Vring, VirtIOSCSIVring.

This is necessary for coming dataplane code that runs uses vring on
iothread.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Similar to this property in virtio-blk for dataplane, add it as a QOM
link in virtio-scsi and an alias in virtio-scsi-pci and virtio-scsi-ccw,
in order to assign an iothread to the device.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>