xhci_kick_epctx is a xhci_kick_ep variant which takes an XHCIEPContext
as input instead of slotid and epid.  So in case we have a XHCIEPContext
at hand at the callsite we can just pass it directly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-7-git-send-email-kraxel@redhat.com

Use XHCITransfer->epctx->xhci instead.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-6-git-send-email-kraxel@redhat.com

xhci has a fixed number of 24 (TD_QUEUE) XHCITransfer structs per
endpoint, which turns out to be a problem for usb3 devices with 32 (or
more) bulk streams.  xhci re-checks the trb rings on every finished
transfer to make sure it'll pick up any pending work.  But that scheme
breaks in case the first transfer of a ring can't be started because we
ran out of XHCITransfer structs already.

So remove static XHCITransfer array from XHCIEPContext.  Use a linked
list instead, and allocate/free XHCITransfer as needed.  Add helper
functions to allocate & initialize and to cleanup & release
XHCITransfer structs.  That also simplifies trb management, we never
have to realloc XHCITransfer->trbs because we don't reuse XHCITransfer
structs any more.

New dynamic limit for in-flight xhci transfers per endpoint is
number-of-streams + 16.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-5-git-send-email-kraxel@redhat.com

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-4-git-send-email-kraxel@redhat.com

EV_QUEUE must not change because an array of that size is part of live
migration data.  Hard-code current value there, so we can touch TD_QUEUE
without breaking live migration.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-3-git-send-email-kraxel@redhat.com

Needed to avoid we run in circles forever in case the guest builds
an endless loop with link trbs.
Reported-by: NLi Qiang <liqiang6-s@360.cn>
Tested-by: NP J P <ppandit@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1476096382-7981-1-git-send-email-kraxel@redhat.com

C99 requires SIZE_MAX to be declared with the same type as the
integral promotion of size_t, but OSX mistakenly defines it as
an 'unsigned long long' expression even though size_t is only
'unsigned long'.  Rather than futzing around with whether size_t
is 32- or 64-bits wide (which would be needed if we cared about
using SIZE_T in a #if expression), just hard-code it with a cast.
This is not a strict C99-compliant definition, because it doesn't
work in the preprocessor, but if we later need that, the build
will break on Mac to inform us to improve our replacement at that
time.

See also https://patchwork.ozlabs.org/patch/542327/ for an
instance where the wrong type trips us up if we don't fix it
for good in osdep.h.

Some versions of glibc make a similar mistake with SSIZE_MAX; the
goal is that the approach of this patch could be copied to work
around that problem if it ever becomes important to us.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1476200784-17210-1-git-send-email-eblake@redhat.com
Reviewed-by: NJohn Arbuckle <programmingkidx@gmail.com>
Tested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio, pc: fixes and features

more guest error handling for virtio devices
virtio migration rework
pc fixes
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 10 Oct 2016 00:39:11 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (33 commits)
  intel-iommu: Check IOAPIC's Trigger Mode against the one in IRTE
  virtio: cleanup VMSTATE_VIRTIO_DEVICE
  vhost-vsock: convert VMSTATE_VIRTIO_DEVICE
  virtio-rng: convert VMSTATE_VIRTIO_DEVICE
  virtio-balloon: convert VMSTATE_VIRTIO_DEVICE
  virtio-scsi: convert VMSTATE_VIRTIO_DEVICE
  virtio-input: convert VMSTATE_VIRTIO_DEVICE
  virtio-gpu: convert VMSTATE_VIRTIO_DEVICE
  virtio-serial: convert VMSTATE_VIRTIO_DEVICE
  virtio-9p: convert VMSTATE_VIRTIO_DEVICE
  virtio-net: convert VMSTATE_VIRTIO_DEVICE
  virtio-blk: convert VMSTATE_VIRTIO_DEVICE
  virtio: prepare change VMSTATE_VIRTIO_DEVICE macro
  net: don't poke at chardev internal QemuOpts
  virtio-scsi: handle virtio_scsi_set_config() error
  virtio-scsi: convert virtio_scsi_bad_req() to use virtio_error()
  virtio-net: handle virtio_net_flush_tx() errors
  virtio-net: handle virtio_net_receive() errors
  virtio-net: handle virtio_net_handle_ctrl() error
  virtio-blk: handle virtio_blk_handle_request() errors
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block layer patches

# gpg: Signature made Mon 10 Oct 2016 12:33:14 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  dmg: Move libbz2 code to dmg-bz2.so
  module: Don't load the same module if requested multiple times
  scripts: Allow block module to not define BlockDriver
  block: Add qdev ID to DEVICE_TRAY_MOVED
  block-backend: Remember if attached device is non-qdev
  block: Add node name to BLOCK_IO_ERROR event
  block: Add bdrv_runtime_opts to query-command-line-options
  block: use aio_bh_schedule_oneshot
  async: add aio_bh_schedule_oneshot
  block: use bdrv_add_before_write_notifier
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

trivial patches for 2016-10-08

# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
  net/filter-mirror: Fix mirror initial check typo
  virtio: rename the bar index field name in VirtIOPCIProxy
  linux-user: include <poll.h> instead of <sys/poll.h>
  char: fix missing return in error path for chardev TLS init
  CODING_STYLE: Fix a typo ("have" vs. "has")
  bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
  build-sys: fix find-in-path
  m68k: change default system clock for m5208evb
  exec: remove unused compacted argument
  usb: ehci: fix memory leak in ehci_process_itd
  qapi: make the json schema files more regular.
  maint: Add module_block.h to .gitignore
  MAINTAINERS: Some updates related to the SH4 machines
  MAINTAINERS: Add some more MIPS related files
  MAINTAINERS: Add usermode related config files
  MAINTAINERS: Add some more pattern to recognize all win32 related files
  MAINTAINERS: Add some more rocker related files
  MAINTAINERS: Add header files to CRIS section
  MAINTAINERS: Add some more files to the virtio section
  MAINTAINERS: Add some SPARC machine related files
  ...

# Conflicts:
#	MAINTAINERS

QAPI patches for 2016-10-07

# gpg: Signature made Fri 07 Oct 2016 18:55:40 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2016-10-07:
  docs: Belatedly update for move of QMP/* to docs/
  docs: Belatedly update for move of qmp-commands.txt
  qmp: Disable query-cpu-* commands when they're unavailable
  MAINTAINERS: Pass the QObject staff from Luiz to Markus
  MAINTAINERS: Pass the HMP staff from Luiz to David
  qapi: return a 'missing parameter' error
  qapi: assert list entry has a value
  qapi: add assert about root value
  tests/test-qmp-input-strict: Cover missing struct members
  qapi: Fix crash when 'any' or 'null' parameter is missing
  qmp: fix object-add assert() without props
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* Thread Sanitizer fixes (Alex)
* Coverity fixes (David)
* test-qht fixes (Emilio)
* QOM interface for info irq/info pic (Hervé)
* -rtc clock=rt fix (Junlian)
* mux chardev fixes (Marc-André)
* nicer report on death by signal (Michal)
* qemu-tech TLC (Paolo)
* MSI support for edu device (Peter)
* qemu-nbd --offset fix (Tomáš)

# gpg: Signature made Fri 07 Oct 2016 17:25:10 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (39 commits)
  qemu-doc: merge qemu-tech and qemu-doc
  qemu-tech: rewrite some parts
  qemu-tech: reorganize content
  qemu-tech: move TCG test documentation to tests/tcg/README
  qemu-tech: move user mode emulation features from qemu-tech
  qemu-tech: document lazy condition code evaluation in cpu.h
  qemu-tech: move text from qemu-tech to tcg/README
  qemu-doc: drop installation and compilation notes
  qemu-doc: replace introduction with the one from the internals manual
  qemu-tech: drop index
  test-qht: perform lookups under rcu_read_lock
  qht: fix unlock-after-free segfault upon resizing
  qht: simplify qht_reset_size
  qemu-nbd: Shrink image size by specified offset
  qemu_kill_report: Report PID name too
  util: Introduce qemu_get_pid_name
  char: update read handler in all cases
  char: use a fixed idx for child muxed chr
  i8259: give ISA device when registering ISA ioports
  .travis.yml: add gcc sanitizer build
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Trigger Mode field of IOAPIC must match the Trigger Mode in
the IRTE according to VT-d Spec 5.1.5.1.
Signed-off-by: NFeng Wu <feng.wu@intel.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>

Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro. The device virtio-gpu is
special because it actually does not adhere to the virtio migration
schema, because device state is last.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

In most cases the functions passed to VMSTATE_VIRTIO_DEVICE
only call the virtio_load and virtio_save wrappers. Some include some
pre- and post- massaging too. The massaging is better expressed
as such in the VMStateDescription.

Let us prepare for changing the semantic of the VMSTATE_VIRTIO_DEVICE
macro so that it is more similar to the other VMSTATE_*_DEVICE macros
in a sense that it is a field definition.

The preprocessor conditionals are going to be removed as soon as
every usage is converted to the new semantic.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The vhost-user & colo code is poking at the QemuOpts instance
in the CharDriverState struct, not realizing that it is valid
for this to be NULL. e.g. the following crash shows a codepath
where it will be NULL:

 Program terminated with signal SIGSEGV, Segmentation fault.
 #0  0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
 617         QTAILQ_FOREACH(opt, &opts->head, next) {
 [Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))]
 (gdb) bt
 #0  0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
 #1  0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314
 #2  0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360
 #3  0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051
 #4  0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108
 #5  0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186
 #6  0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205
 #7  0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978
 #8  0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105
 #9  0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319
 #10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369
 #11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124
 #12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994
 #13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387
 #14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399
 #15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927
 #16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84
 #17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
 #18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213
 #19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258
 #20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506
 #21 0x000055baf676587b in main_loop () at vl.c:1908
 #22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604
 (gdb) p opts
 $1 = (QemuOpts *) 0x0

The crash occurred when attaching vhost-user net via QMP:

{
    "execute": "chardev-add",
    "arguments": {
        "id": "charnet2",
        "backend": {
            "type": "socket",
            "data": {
                "addr": {
                    "type": "unix",
                    "data": {
                        "path": "/var/run/openvswitch/vhost-user1"
                    }
                },
                "wait": false,
                "server": false
            }
        }
    },
    "id": "libvirt-19"
}
{
    "return": {

    },
    "id": "libvirt-19"
}
{
    "execute": "netdev_add",
    "arguments": {
        "type": "vhost-user",
        "chardev": "charnet2",
        "id": "hostnet2"
    },
    "id": "libvirt-20"
}

Code using chardevs should not be poking at the internals of the
CharDriverState struct. What vhost-user wants is a chardev that is
operating as reconnectable network service, along with the ability
to do FD passing over the connection. The colo code simply wants
a network service. Add a feature concept to the char drivers so
that chardev users can query the actual features they wish to have
supported. The QemuOpts member is removed to prevent future mistakes
in this area.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The virtio_scsi_bad_req() function is called when a guest sends a
request with missing or ill-sized headers. This generally happens
when the virtio_scsi_parse_req() function returns an error.

With this patch, virtio_scsi_bad_req() will mark the device as broken,
detach the request from the virtqueue and free it, instead of forcing
QEMU to exit.

In nearly all locations where virtio_scsi_bad_req() is called, the only
thing to do next is to return to the caller.

The virtio_scsi_handle_cmd_req_prepare() function is an exception though.

It is called in a loop by virtio_scsi_handle_cmd_vq() and passed requests
freshly popped from a cmd virtqueue; virtio_scsi_handle_cmd_req_prepare()
does some sanity checks on the request and returns a boolean flag to
indicate whether the request should be queued or not. In the latter case,
virtio_scsi_handle_cmd_req_prepare() has detected a non-fatal error and
sent a response back to the guest.

We have now a new condition to take into account: the device is broken
and should stop all processing.

The return value of virtio_scsi_handle_cmd_req_prepare() is hence changed
to an int. A return value of zero means that the request should be queued.
Other non-fatal error cases where the request shoudn't be queued  return
a negative errno (values are vaguely inspired by the error condition, but
the only goal here is to discriminate the case we're interested in).

And finally, if virtio_scsi_bad_req() was called, -EINVAL is returned. In
this case, virtio_scsi_handle_cmd_vq() detaches and frees already queued
requests, instead of submitting them.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.

If this happens, virtio_net_flush_tx() also returns -EINVAL, so that all
callers can stop processing the virtqueue immediatly.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

All these errors are caused by a buggy guest: QEMU should not exit.

With this patch, if virtio_blk_handle_request() detects a buggy request, it
marks the device as broken and returns an error to the caller so it takes
appropriate action.

In the case of virtio_blk_handle_vq(), we detach the request from the
virtqueue, free its allocated memory and stop popping new requests.
We don't need to bother about multireq since virtio_blk_handle_request()
errors out early and mrb.num_reqs == 0.

In the case of virtio_blk_dma_restart_bh(), we need to detach and free all
queued requests as well.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

A broken guest may send a request without providing buffers for the reply
or for the request itself, and virtqueue_pop() will return an element with
either in_num == 0 or out_num == 0.

All 9P requests are expected to start with the following 7-byte header:

            uint32_t size_le;
            uint8_t id;
            uint16_t tag_le;

If iov_to_buf() fails to return these 7 bytes, then something is wrong in
the guest.

In both cases, it is wrong to crash QEMU, since the root cause lies in the
guest.

This patch hence does the following:
- keep the check of in_num since pdu_complete() assumes it has enough
  space to store the reply and we will send something broken to the guest
- let iov_to_buf() handle out_num == 0, since it will return 0 just like
  if the guest had provided an zero-sized buffer.
- call virtio_error() to inform the guest that the device is now broken,
  instead of aborting
- detach the request from the virtqueue and free it
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Some functions that were called from the dataplane code are now only used
locally:

virtio_blk_init_request()
virtio_blk_handle_request()
virtio_blk_submit_multireq()

since commit "03de2f52 virtio-blk: do not use vring in dataplane", and

virtio_blk_free_request()

since commit "6aa46d8f virtio: move VirtQueueElement at the beginning
of the structs".

This patch converts them to static.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Ports enter a "throttled" state when writing to the chardev would block.
The current output VirtQueueElement is kept around until the chardev
becomes writable again.

There are several places in the virtio-serial lifecycle where the
VirtQueueElement should be thrown away.  For example, if the virtio
device is reset then virtqueue elements are no longer valid.

This patch adds the discard_throttle_data() function to unmap the
scatter-gather list and decrement vq->inuse.  This ensures that the
VirtQueueElement is freed properly.

Cc: amit.shah@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NLadi Prosek <lprosek@redhat.com>
Reviewed-by: NLadi Prosek <lprosek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Make sure to unmap the scatter-gather list and decrement vq->inuse
before freeing requests in virtio_blk_reset().
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLadi Prosek <lprosek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.

Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset.  Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NLadi Prosek <lprosek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

so it would be possible to verify _PXM generation in
DSDT and SRAT tables.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>