This patch adds the new bps_*_max_length and iops_*_max_length
parameters to the BlockDeviceInfo struct.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds the new bps_*_max_length and iops_*_max_length
parameters to the block_set_io_throttle command.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds all the throttling.*-max-length command-line
parameters to define the length of the burst periods.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds support for burst periods to the throttling code.
With this feature the user can keep performing bursts as defined by
the LeakyBucket.max rate for a configurable period of time.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We can currently initialize ThrottleConfig by zeroing all its fields,
but this will change with the new fields to define the length of the
burst periods.

This patch introduces a new throttle_config_init() function and uses it
to replace all memset() calls that initialize ThrottleConfig directly.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There's no need to keep throttle_conflicting(), throttle_is_valid()
and throttle_max_is_missing_limit() as separate functions, so this
patch merges all three into one.

As a consequence, check_throttle_config() becomes redundant and can be
replaced with throttle_is_valid().
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When testing the ranges of valid values, set_cfg_value() creates
sometimes invalid throttling configurations by setting bucket.max
while leaving bucket.avg uninitialized.

While this doesn't break the current tests, it will as soon as
we unify all functions that check the validity of the throttling
configuration.

This patch ensures that the value of bucket.avg is valid when setting
bucket.max.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The caller does not need to set it, and this will allow us to refactor
this function later.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The caller does not need to set it, and this will allow us to refactor
this function later.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The caller does not need to set it, and this will allow us to refactor
this function later.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This function is only used internally in throttle.c
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When using 'migrate -b', we must make sure to take ownership of the
image before writing to it. Otherwise metadata would be thrown away on
migration completion; this was caught by the assertions introduced in
commit 09e0c771.
Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When declaring the 'struct option' array, use the standard
constants no_argument/required_argument, instead of magic
values 0 and 1.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When declaring the 'struct option' array, use the standard
constants no_argument/required_argument, instead of magic
values 0 and 1.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When defining values for long options, the normal practice is
to start numbering from 256, to avoid overlap with the range
of valid values for short options.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently qemu-img allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg

   qemu-img info https://127.0.0.1/images/centos7.iso

This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.

   qemu-img info --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off

This flag is mutually exclusive with the '-f' / '-F' flags.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently qemu-nbd allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg

   qemu-nbd https://127.0.0.1/images/centos7.iso
   qemu-nbd /home/berrange/demo.qcow2

This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.

   qemu-nbd --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
   qemu-nbd --image-opts driver=file,filename=/home/berrange/demo.qcow2

This flag is mutually exclusive with the '-f' flag.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently qemu-io allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg

 qemu-io https://127.0.0.1/images/centos7.iso
 qemu-io /home/berrange/demo.qcow2

By contrast when using the interactive shell, it is possible to
use --option with the 'open' command, or to omit the filename.

This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.

 qemu-io --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
 qemu-io --image-opts driver=qcow2,file.filename=/home/berrange/demo.qcow2

This flag is mutually exclusive with the '-f' flag and with
the '-o' flag to the 'open' command
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Allow creation of user creatable object types with qemu-img
via a new --object command line arg. This will be used to supply
passwords and/or encryption keys to the various block driver
backends via the recently added 'secret' object type.

 # printf letmein > mypasswd.txt
 # qemu-img info --object secret,id=sec0,file=mypasswd.txt \
      ...other info args...
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Allow creation of user creatable object types with qemu-io
via a new --object command line arg. This will be used to supply
passwords and/or encryption keys to the various block driver
backends via the recently added 'secret' object type.

 # printf letmein > mypasswd.txt
 # qemu-io --object secret,id=sec0,file=mypasswd.txt \
      ...other args...
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The BDRV_O_INACTIVE flag should only be set for images explicitly opened
by the user. snapshot=on needs to create a new qcow2 image and write
some metadata to it. This is not a problem because it can't come from
the source, so there's no reason to mark it as BDRV_O_INACTIVE, even
though it is opened while waiting for the migration to complete.

This fixes an assertion failure when -incoming and snapshot=on are
combined.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The new feature for qcow2: storing bitmaps.

This patch adds new header extension to qcow2 - Bitmaps Extension. It
provides an ability to store virtual disk related bitmaps in a qcow2
image. For now there is only one type of such bitmaps: Dirty Tracking
Bitmap, which just tracks virtual disk changes from some moment.

Note: Only bitmaps, relative to the virtual disk, stored in qcow2 file,
should be stored in this qcow2 file. The size of each bitmap
(considering its granularity) is equal to virtual disk size.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NChanglong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 16b0d555 introduced an issue where we are not initializing
has_filename for the 'next' MapEntry object, which leads to interesting
errors in both Valgrind and Clang -fsanitize=undefined.

Zero the stack object at allocation AND make sure the utility to
populate the fields properly marks has_filename as false if applicable.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

VFIO updates 2016-02-19

 - AER pre-enable and misc fixes (Cao jin and Chen Fan)
 - PCI_CAP_LIST_NEXT & PCI_MSIX_FLAGS cleanup (Wei Yang)
 - AMD XGBE KVM platform passthrough (Eric Auger)

# gpg: Signature made Fri 19 Feb 2016 17:28:36 GMT using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20160219.1:
  vfio/pci: use PCI_MSIX_FLAGS on retrieving the MSIX entries
  hw/arm/sysbus-fdt: remove qemu_fdt_setprop returned value check
  hw/arm/sysbus-fdt: enable amd-xgbe dynamic instantiation
  hw/arm/sysbus-fdt: helpers for clock node generation
  device_tree: qemu_fdt_getprop_cell converted to use the error API
  device_tree: qemu_fdt_getprop converted to use the error API
  device_tree: introduce qemu_fdt_node_path
  device_tree: introduce load_device_tree_from_sysfs
  hw/vfio/platform: amd-xgbe device
  vfio/pci: replace 1 with PCI_CAP_LIST_NEXT to make code self-explain
  pcie_aer: expose pcie_aer_msg() interface
  aer: impove pcie_aer_init to support vfio device
  vfio: make the 4 bytes aligned for capability size
  pcie: modify the capability size assert
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

softfloat queue:
 * update MAINTAINERS with a section for softfloat
 * drop all the uses of int_fast*_t types

# gpg: Signature made Fri 19 Feb 2016 16:34:35 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-softfloat-20160219:
  MAINTAINERS: Add section for FPU emulation
  osdep.h: Remove int_fast*_t Solaris compatibility code
  fpu: Use plain 'int' rather than 'int_fast16_t' for exponents
  fpu: Use plain 'int' rather than 'int_fast16_t' for shift counts
  fpu: Remove use of int_fast16_t in conversions to int16
  target-mips: Stop using uint_fast*_t types in r4k_tlb_t struct
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Even PCI_CAP_FLAGS has the same value as PCI_MSIX_FLAGS, the later one is
the more proper on retrieving MSIX entries.

This patch uses PCI_MSIX_FLAGS to retrieve the MSIX entries.
Signed-off-by: NWei Yang <richard.weiyang@gmail.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

qemu_fdt_setprop asserts in case of error hence no need to check
the returned value.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This patch allows the instantiation of the vfio-amd-xgbe device
from the QEMU command line (-device vfio-amd-xgbe,host="<device>").

The guest is exposed with a device tree node that combines the description
of both XGBE and PHY (representation supported from 4.2 onwards kernel):
Documentation/devicetree/bindings/net/amd-xgbe.txt.

There are 5 register regions, 6 interrupts including 4 optional
edge-sensitive per-channel interrupts.

Some property values are inherited from host device tree. Host device tree
must feature a combined XGBE/PHY representation (>= 4.2 host kernel).

2 clock nodes (dma and ptp) also are created. It is checked those clocks
are fixed on host side.

AMD XGBE node creation function has a dependency on vfio Linux header and
more generally node creation function for VFIO platform devices only make
sense with CONFIG_LINUX so let's protect this code with #ifdef CONFIG_LINUX.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Some passthrough'ed devices depend on clock nodes. Those need to be
generated in the guest device tree. This patch introduces some helpers
to build a clock node from information retrieved in the host device tree.

- copy_properties_from_host copies properties from a host device tree
  node to a guest device tree node
- fdt_build_clock_node builds a guest clock node and checks the host
  fellow clock is a fixed one.

fdt_build_clock_node will become static as soon as it gets used. A
dummy pre-declaration is needed for compilation of this patch.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This patch aligns the prototype with qemu_fdt_getprop. The caller
can choose whether the function self-asserts on error (passing
&error_fatal as Error ** argument, corresponding to the legacy behavior),
or behaves differently such as simply output a message.

In this later case the caller can use the new lenp parameter to interpret
the error if any.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Current qemu_fdt_getprop exits if the property is not found. It is
sometimes needed to read an optional property, in which case we do
not wish to exit but simply returns a null value.

This patch converts qemu_fdt_getprop to accept an Error **, and existing
users are converted to pass &error_fatal. This preserves the existing
behaviour. Then to use the API with your optional semantic a null
parameter can be conveyed.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This new helper routine returns a NULL terminated array of
node paths matching a node name and a compat string.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This function returns the host device tree blob from sysfs
(/proc/device-tree). It uses a recursive function inspired
from dtc read_fstree.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This patch introduces the amd-xgbe VFIO platform device. It
allows the guest to do passthrough on a device exposing an
"amd,xgbe-seattle-v1a" compat string.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Use the macro PCI_CAP_LIST_NEXT instead of 1, so that the code would be
more self-explain.

This patch makes this change and also fixs one typo in comment.
Signed-off-by: NWei Yang <richard.weiyang@gmail.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

For vfio device, we need to propagate the aer error to
Guest OS. we use the pcie_aer_msg() to send aer error
to guest.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

pcie_aer_init was used to emulate an aer capability for pcie device,
but for vfio device, the aer config space size is mutable and is not
always equal to PCI_ERR_SIZEOF(0x48). it depends on where the TLP Prefix
register required, so here we add a size argument.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

this function search the capability from the end, the last
size should 0x100 - pos, not 0xff - pos.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>