Add commands to query Virtual Machine Generation ID counter.

QMP command example:
    { "execute": "query-vm-generation-id" }

HMP command example:
    info vm-generation-id
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Adding one more option "-f" for "info mtree" to dump the flat views of
all the address spaces.

This will be useful to debug the memory rendering logic, also it'll be
much easier with it to know what memory region is handling what address
range.
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-7-git-send-email-hpoussin@reactos.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-6-git-send-email-hpoussin@reactos.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is no longer necessary now that we aren't using middle mode
anymore.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Homogenizes the command capabilities with QMP.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This is the HMP equivalent for QMP query-hotpluggable-cpus.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
[dwg: Fixed problem with printf formats on 32-bit host]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

It will calculate percentage of finished work from completed and
total.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1455772616-8668-11-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Added the hmp command to query io apic state, may be usefull after guest
crashes to understand IRQ routing in guest.

Implementation is only for kvm here. The dump will look like
(qemu) info ioapic
ioapic id=0x00 sel=0x26 (redir[11])
pin 0  0x0000000000010000 dest=0 vec=0   active-hi edge  masked fixed  physical
pin 1  0x0000000000000031 dest=0 vec=49  active-hi edge         fixed  physical
...
pin 23 0x0000000000010000 dest=0 vec=0   active-hi edge  masked fixed  physical
IRR        (none)
Remote IRR (none)
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Added the hmp command to query local apic registers state, may be
usefull after guest crashes to understand IRQ routing in guest.

(qemu) info lapic
dumping local APIC state for CPU 0

LVT0    0x00010700 active-hi edge  masked                      ExtINT (vec 0)
LVT1    0x00000400 active-hi edge                              NMI
LVTPC   0x00010000 active-hi edge  masked                      Fixed  (vec 0)
LVTERR  0x000000fe active-hi edge                              Fixed  (vec 254)
LVTTHMR 0x00010000 active-hi edge  masked                      Fixed  (vec 0)
LVTT    0x000000ef active-hi edge                 one-shot     Fixed  (vec 239)
Timer   DCR=0x3 (divide by 16) initial_count = 61360
SPIV    0x000001ff APIC enabled, focus=off, spurious vec 255
ICR     0x000000fd physical edge de-assert no-shorthand
ICR2    0x00000001 cpu 1 (X2APIC ID)
ESR     0x00000000
ISR     (none)
IRR     239

APR 0x00 TPR 0x00 DFR 0x0f LDR 0x00 PPR 0x00
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-7-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Dropped by commit da76ee76's
transition to hmp-commands-info.hx.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <1442589509-10806-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.

From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For moving target- and device-specific code  from monitor.c,
to beginning we move info_cmds content to hmp-commands-info.hx
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>