[crobinso@localhost qemu-2.0.0-rc0]$ find . -name .git
./dtc/.git
./pixman/.git

This is already done for the rom submodules.

https://bugs.launchpad.net/qemu/+bug/1224414Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Those versions don't fully support __int128_t.

Cc: qemu-stable@nongnu.org
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

'make test' is broken at least since commit
baacf047. Several source files were moved
to util/, and some of them there split, so add the missing prefix and new
files to fix the compiler and linker errors.

There remain more issues, but these changes allow running the test on a
Linux i686 host.

Cc: qemu-stable@nongnu.org
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Codespell found and fixed these new typos:

* doesnt -> doesn't
* funtion -> function
* perfomance -> performance
* remaing -> remaining

A coding style issue (line too long) was fixed manually.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The folder "qga/qapi-generated" shows up after building QEMU, and
gets in the way during e.g. "git add ."; Add it to .gitignore to
keep it from accidentally ending up in the wrong place.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The GPTIMER uses 32-bit registers.  Use a 64-bit operation to get the
ptimer count, otherwise we end up with a count of 0 for GPTIMER counter
values of 0xffffffff.

Use the GPTIMER counter value for tracing to avoid an overflow of the
32-bit value passed to trace_grlib_gptimer_enable().
Reviewed-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NSebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

I'm trying to avoid spamming the IRC channel (not overly likely as
builds take a while). So failure will always be reported but if the
build continues to work then the IRC notifications will be quiet.

Note any GitHub based repository with Travis enabled will use this
notification. If it proves to be too spammy we may want to ask users not
to use Travis themselves although this seems sub-optimal.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Purely cosmetic but satisfies my OCD.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This build was disabled while the lttng tracing was broken. Stefan has
recently submitted a pull request with it re-enabled.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The current builds don't include all the features which are
auto-detected and then disabled when the appropriate test packages don't
exist. I've added another target that enables all known additional
packages for increased coverage. I didn't add it to the core package
list to reduce build time.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The "keytab" specification in "qemu.sasl" only makes sense if "gssapi" is
selected in "mech_list". Even if the latter is not done (ie. "gssapi" is
not selected), the cyrus-sasl library tries to open the specified keytab
file, although nothing has a use for it outside the gssapi backend.

Since the default keytab file "/etc/qemu/krb5.tab" is usually absent, the
cyrus-sasl library emits a warning to syslog at startup, which tends to
annoy users (who didn't ask for gssapi in the first place).

Comment out the keytab specification per default.

"qemu-doc.texi" already correctly explains how to use "mech_list: gssapi"
together with "keytab:".

See also:
- upstream libvirt commit fe772f24,
- Red Hat Bugzilla <https://bugzilla.redhat.com/show_bug.cgi?id=1018434>.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
ACKed-By: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

* remotes/bonzini/scsi-next:
  virtio-scsi: actually honor sense_size from configuration space
  scsi: Fix migration of scsi sense data
  spapr-vscsi: fix CRQ status
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We were always truncating the sense size to 96 bytes.
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

c5f52875 changed the size of sense array in vmstate_scsi_device by
mistake. This patch restores the old size, and add a subsection for the
remaining part of the buffer size. So that migration is not broken.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Normally VIOSRP_OK (0) means success and non-zero value means error
except VIOSRP_OK2 (0x99) which is another success code by weird accident.

This uses 0 as success code always as some guests do not cope with
the 0x99 value well. The existing linux driver checks for both VIOSRP_OK
and VIOSRP_OK2 since 2.6.32.

This returns non-zero code (VIOSRP_ADAPTER_FAIL == 0x10) on errors which
can only happen if DMA write failed.
Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

QOM/QTest infrastructure fixes

* QOM cast fix for virtserialport and regression test
* QTest error handling fix
* QTest output cleanup

# gpg: Signature made Thu 13 Mar 2014 20:43:34 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-2.0:
  main-loop: Suppress "I/O thread spun" warnings for qtest
  qtest: Fix crash if SIGABRT during qtest_init()
  virtio-console-test: Test virtserialport as well
  virtio-console: Fix VIRTIO_CONSOLE() cast macro
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

PowerPC queue for 2.0

* Fixes for -device VGA

# gpg: Signature made Thu 13 Mar 2014 19:57:12 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/ppc-for-2.0:
  spapr: Fix return value of vga initialization
  Fix vga_interface_type for command line argument '-device VGA'
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When running under qtest we don't actually have any vcpu threads
to be starved, so the warning about the I/O thread spinning isn't
relevant, and the way qtest manipulates the simulated clock means
the warning is produced a lot as a false positive. Suppress it if
qtest_enabled(), so 'make check' output is less noisy.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

If an assertion fails during qtest_init() the SIGABRT handler is
invoked.  This is the correct behavior since we need to kill the QEMU
process to avoid leaking it when the test dies.

The global_qtest pointer used by the SIGABRT handler is currently only
assigned after qtest_init() returns.  This results in a segfault if an
assertion failure occurs during qtest_init().

Move global_qtest assignment inside qtest_init().  Not pretty but let's
face it - the signal handler depends on global state.
Reported-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

A test is only as good as its coverage - testing virtserialport in
addition to virtconsole showed that commit
0399a381 (virtio-console: QOM cast
cleanup for VirtConsole) broke virtserialport.
Acked-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Commit 0399a381 (virtio-console: QOM
cast cleanup for VirtConsole) broke virtserialport since it shares
functions and state struct with virtconsole. Let virtconsole inherit
from virtserialport, and use virtserialport type for casting.

Note that virtio-serial-port is the abstract base type in
virtio-serial-bus.c, whereas virtserialport is the user-instantiatable
type in virtio-console.c. Therefore using TYPE_VIRTIO_CONSOLE_SERIAL_PORT.
Reported-by: NRichard W.M. Jones <rjones@redhat.com>
Acked-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

PReP machine and devices

* ppc_rom.bin update
* Raven PCI host bridge preparations for OpenBIOS

# gpg: Signature made Thu 13 Mar 2014 19:28:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/prep-for-2.0:
  raven: Move BIOS loading from board code to PCI host
  prep: Update ppc_rom.bin
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Before spapr_vga_init will returned false if the vga is specified by
the command '-device VGA' because vga_interface_type was evaluated to
VGA_NONE. With the change in previous patch of this series,
spapr_vga_init should return true if it's told that the vga will be
initialized in flow of the generic devices initialization.

To keep '-nodefaults' have the semantics of bare minimum, it adds a
check of 'has_defaults' in usb_enabled() to avoid that a USB controller
is added by '-nodefautls, -device VGA' implicitly.

This patch also makes two cleanups:
1. skip initialization for VGA_NONE
2. remove the useless 'break'
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Some machine (like pseries) initialization code determines if it has
graphics according to vga_interface_type. In the original code,
vga_interface_type is evaluated to VGA_NONE even if a VGA is added
via '-device VGA'. It causes the machine not aware of the graphics
device configured. Add a new VGA device type to indicate that it has a
VGA device, which will be initialized in QOM device initialization.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Raven datasheet explains where firmware lives in system memory, so do
it there instead of in board code. Other boards using the same PCI
host will not have to copy the firmware loading code.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
[AF: Drop BIOS size workaround in favor of replacing our firmware blob]
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

This increases file size from 512 KiB to 1 MiB.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

QOM CPUState refactorings / X86CPU

* Deadlock fix for exit requests around CPU reset
* X86CPU x2apic for KVM
* X86CPU model subclasses
* SPARCCPU preparations for model subclasses
* -cpu arguments for arm, cris, lm32, moxie, openrisc, ppc, sh4, uc32
* m68k assertion cleanups
* CPUClass hooks for cpu.h inline functions
* Field movements from CPU_COMMON to CPUState and follow-up cleanups

# gpg: Signature made Thu 13 Mar 2014 19:06:56 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-cpu-for-2.0: (58 commits)
  user-exec: Change exception_action() argument to CPUState
  cputlb: Change tlb_set_page() argument to CPUState
  cputlb: Change tlb_flush() argument to CPUState
  cputlb: Change tlb_flush_page() argument to CPUState
  target-microblaze: Replace DisasContext::env field with MicroBlazeCPU
  target-cris: Replace DisasContext::env field with CRISCPU
  exec: Change cpu_abort() argument to CPUState
  exec: Change memory_region_section_get_iotlb() argument to CPUState
  cputlb: Change tlb_unprotect_code_phys() argument to CPUState
  cpu-exec: Change cpu_resume_from_signal() argument to CPUState
  exec: Change cpu_breakpoint_{insert,remove{,_by_ref,_all}} argument
  exec: Change cpu_watchpoint_{insert,remove{,_by_ref,_all}} argument
  target-ppc: Use PowerPCCPU in PowerPCCPUClass::handle_mmu_fault hook
  translate-all: Change tb_flush_jmp_cache() argument to CPUState
  translate-all: Change tb_gen_code() argument to CPUState
  translate-all: Change cpu_io_recompile() argument to CPUState
  translate-all: Change tb_check_watchpoint() argument to CPUState
  translate-all: Change cpu_restore_state_from_tb() argument to CPUState
  translate-all: Change cpu_restore_state() argument to CPUState
  cpu-exec: Change cpu_loop_exit() argument to CPUState
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

This cleans up some mb_env_get_cpu() needed for cpu_abort().
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This cleans up repeated cris_env_get_cpu() for cpu_abort().
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

input: activate legacy kbd
gtk: Add mouse wheel support

# gpg: Signature made Thu 13 Mar 2014 10:34:17 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-6:
  gtk: Add mouse wheel support
  input: activate legacy kbd
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It no longer needs CPUArchState since moving watchpoints to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Note that the argument is unused.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>