Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.

For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.

Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.

At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162

Currently, waiting for the user to type in some password blocks the
whole VM because monitor_readline starts its own I/O loop. And this loop
also screws up reading passwords from virtual console.

Patch below fixes the shortcomings by using normal I/O processing also
for waiting on a password. To keep to modal property for the monitor
terminal, the command handler is temporarily replaced by a password
handler and a callback infrastructure is established to process the
result before switching back to command mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162

Break readline_show_prompt out of readline_start so that (re-)printing
the prompt can be controlled in a more fine-grained way.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6709 c046a42c-6fe2-441c-8c8c-71466251a162

Drop the hack to query passwords on all monitor terminals now that they
are requested when the user initially enters 'continue'.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6708 c046a42c-6fe2-441c-8c8c-71466251a162

Reading the passwords for encrypted hard disks during early startup is
broken (I guess for quiet a while now):
 - No monitor terminal is ready for input at this point
 - Forcing all mux'ed terminals into monitor mode can confuse other
   users of that channels

To overcome these issues and to lay the ground for a clean decoupling of
monitor terminals, this patch changes the initial password inquiry as
follows:
 - Prevent autostart if there is some encrypted disk
 - Once the user tries to resume the VM, prompt for all missing
   passwords
 - Only resume if all passwords were accepted
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162

If the backing file is encrypted, 'info block' currently does not report
the disk as encrypted. Fix this by using the standard API to check disk
encryption mode. Moreover, switch to a canonical output format.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6706 c046a42c-6fe2-441c-8c8c-71466251a162

If a target uses a tiny display (like the MusicPal), the default monitor
is currently set to the same size. Fix this by applying the same
defaults like already used serial and virtio consoles.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6705 c046a42c-6fe2-441c-8c8c-71466251a162

Introduce bdrv_get_encrypted_filename service to allow more informative
password prompting.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6704 c046a42c-6fe2-441c-8c8c-71466251a162

Make bdrv_iterate more useful by passing the BlockDriverState to the
iterator instead of the device name.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6703 c046a42c-6fe2-441c-8c8c-71466251a162

Make sure that we always delete temporary disk images on error, remove
obsolete malloc error checks and return proper error codes.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6702 c046a42c-6fe2-441c-8c8c-71466251a162

Currently, the intermediate input buffer of mux'ed character devices
records data across all sub-devices. This has the side effect that we
easily leak data recorded over one sub-devices to another once we switch
the focus. Avoid data loss and confusion by defining exclusive buffers.

Note: In contrast to the original author's claim, the buffering concept
still breaks down when the fifo of the currently active sub-device is
full. As we cannot accept futher data from this point on without risking
to loose it, we will also miss escape sequences, just like without all
that buffering. In short: There is no reliable escape sequence handling
without infinite buffers or the risk of loosing some data.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6701 c046a42c-6fe2-441c-8c8c-71466251a162

Recent changes to the graphical console initialization broke the initial
CHR_EVENT_RESET distribution. The reset BHs generated on char device
initialization are now already consumed during machine init (ide init
... -> qemu_aio_wait -> qemu_bh_poll). Therefore, this patch moves the
initial qemu_chr_reset calls into a separate funtion which is called
after machine init.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6700 c046a42c-6fe2-441c-8c8c-71466251a162

Cpuid should return into vec, not overwrite past address in count.
Changeset 6565 broke this.
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6689 c046a42c-6fe2-441c-8c8c-71466251a162

SLES10 SP2 installer complains when probing a scsi disk and exits qemu
when failing to read one of the registers.

lsi_scsi: error: readb 0x15


-- 
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
ryanh@us.ibm.com



diffstat output:
 lsi53c895a.c |    2 ++
 1 files changed, 2 insertions(+)
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
---
Subject: [PATCH] lsi: add ISTAT1 register read
From: Ryan Harper <ryanh@us.ibm.com>
Cc: kvm@vger.kernel.org

SLES10 SP2 installer complains when probing a scsi disk and exits qemu when
failing to read one of the registers.

lsi_scsi: error: readb 0x15
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6688 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6685 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6684 c046a42c-6fe2-441c-8c8c-71466251a162

Version 2 does as follows:

[1]: Corrects endianness on issues by using native BGR to RGB conversion
[2]: Uses DisplayState accessors for obtaining graphics context information,
     which
[3]: Removes now unused variables, and
[4]: Allows reading of varying color modes (32bit/24/16), and converting to
     native colorspace
[5]: Attempts to keep itself centered on screen (as opposed to bottom right,
     which immediately goes off screen after bios load) on context changes
    (window resizes)

Testing working on i386 (gentoo, Windows 2000) and PPC (debian) guests on PPC
and x86 Macs.

In regards to [4], Windows 2000 displays fine on quick tests, but on the lowest
setting I could test, 16bit color depth at 4bpp, colors are slightly off. I
used gentoo install-x86-minimal-2008.0 in framebuffer mode to test above
setting; the usual grey text is now blue, and Tux appears to be BGR shifted. I
do not know if previous code worked at such a low color setting.

Signed-off-by: Samuel Benson <qemu_ml@digitalescape.info> 



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6683 c046a42c-6fe2-441c-8c8c-71466251a162

different names confuses GDB, so use org.gnu.gdb.arm.vfp for all of them.
Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6682 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NLaurent Vivier <Laurent@vivier.eu>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6681 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6680 c046a42c-6fe2-441c-8c8c-71466251a162

Fix several endless loops.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6679 c046a42c-6fe2-441c-8c8c-71466251a162

This patch corrects SDL support on X11 hosts using evdev.  It's losely based
on the previous patch by Dustin Kirkland and the evdev support code in gtk-vnc
written by Daniel Berrange.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6678 c046a42c-6fe2-441c-8c8c-71466251a162

Introduce a growable flag that's set by bdrv_file_open().  Block devices should
never be growable, only files that are being used by block devices.

I went through Fabrice's early comments about the patch that was first applied.
While I disagree with that patch, I also disagree with Fabrice's suggestion.

There's no good reason to do the checks in the block drivers themselves.  It
just increases the possibility that this bug could show up again.  Since we're
calling bdrv_getlength() to determine the length, we're giving the block drivers
a chance to chime in and let us know what range is valid.

Basically, this patch makes the BlockDriver API guarantee that all requests are
within 0..bdrv_getlength() which to me seems like a Good Thing.

What do others think?
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6677 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NLaurent Vivier <Laurent@vivier.eu>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6676 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NLionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6675 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAlex Ivanov <void@aleksoft.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6674 c046a42c-6fe2-441c-8c8c-71466251a162

Fix invalid access/crash when there is no IDE device or NET device.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Tested-by: NShin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6673 c046a42c-6fe2-441c-8c8c-71466251a162

Version 2 of the patch.
Signed-off-by: NLionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6672 c046a42c-6fe2-441c-8c8c-71466251a162

With my previous patch (the one monitoring tlb), I found that the last
TLB entry was never use. Here a little fix.
Signed-off-by: NLionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6671 c046a42c-6fe2-441c-8c8c-71466251a162

This patch might interest some people trying (as I try to do) to fix
some tlbs for kernel/user space data sharing.
Signed-off-by: NLionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6670 c046a42c-6fe2-441c-8c8c-71466251a162

- use ctz32 instead of ffs - 1
- small optimisation of mtcrf
- add the name of both opcodes
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6669 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6668 c046a42c-6fe2-441c-8c8c-71466251a162

Noticed by Alexander Graf

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6667 c046a42c-6fe2-441c-8c8c-71466251a162

* target-sh4/cpu.h (struct CPUSH4State): New field ldst.
* target-sh4/translate.c (cpu_ldst): New.
  (sh4_translate_init): Initialize cpu_ldst.
  (_decode_opc): Support MOVCO.L and MOVLI.L.

(Vladimir Prus)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6666 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6665 c046a42c-6fe2-441c-8c8c-71466251a162

mpc8544ds.dts is copied from kerenl.
Non-supported devices has been removed.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6664 c046a42c-6fe2-441c-8c8c-71466251a162

This patch add an emulation of MPC8544DS board.
It can work on All E500 platforms.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6663 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6662 c046a42c-6fe2-441c-8c8c-71466251a162

This patch add the emulation of freescale's pci controller for MPC85xx platform.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6661 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6660 c046a42c-6fe2-441c-8c8c-71466251a162