Features added to the model, in relation to SandyBridge:

fma       CPUID[1].ECX[12]
pcid      CPUID[1].ECX[17]
movbe     CPUID[1].ECX[22]
fsgsbase  CPUID[EAX=7,ECX=0].EBX[0]
bmi1      CPUID[EAX=7,ECX=0].EBX[3]
hle       CPUID[EAX=7,ECX=0].EBX[4]
avx2      CPUID[EAX=7,ECX=0].EBX[5]
smep      CPUID[EAX=7,ECX=0].EBX[7]
bmi2      CPUID[EAX=7,ECX=0].EBX[8]
erms      CPUID[EAX=7,ECX=0].EBX[9]
invpcid   CPUID[EAX=7,ECX=0].EBX[10]
rtm       CPUID[EAX=7,ECX=0].EBX[11]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Add a new base CPU model called Opteron_G5 to model the latest
Opteron CPUs. This increases the model value and model numbers and
adds TBM, F16C and FMA over the latest G4 model.
Signed-off-by: NAndre Przywara <osp@andrep.de>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@amd.com>
[ehabkost: edited commit message]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Update QEMU's knowledge of CPUID bit names. This allows to
enable/disable those new features on QEMU's command line when
using KVM and prepares future feature enablement in QEMU.

This adds F16C, RDRAND, LWP, TBM, TopoExt, PerfCtr_Core, PerfCtr_NB,
FSGSBASE, BMI1, AVX2, BMI2, ERMS, PCID, InvPCID, RTM, RDSeed and ADX.

Sources where the AMD BKDG for Family 15h/Model 10h, Intel Software
Developer Manual, and the Linux kernel for the leaf 7 bits.
Signed-off-by: NAndre Przywara <osp@andrep.de>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@amd.com>
[ehabkost: added CPUID_EXT_PCID]
[ehabkost: edited commit message]
[ehabkost: rebased against latest qemu.git master]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Needed to prevent build breakage when CPUState becomes a child of
DeviceState.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
[ehabkost: include <stdbool.h> too]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

They are implemented in osdep.c, so keep the prototypes in osdep.h.
Suggested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NEduardo Habkost <ehabkost@redhat.com>

Include:
- <stdio.h> for FILE
- qemu-option.h for QemuOptsList

Some of those headers were probably being included by accident because
some other headers were including qemu-common.h, but those headers
should eventually stop including qemu-common.h.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

<stdbool.h> is needed for the 'bool' type, used in the header.

The header is probably being included by accident because some other
headers are including qemu-common.h, but those headers should eventually
stop including qemu-common.h.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

module.h is where machine_init() is defined, but qemu-fsdev-dummy.c
doesn't include it.

The header is probably being included by accident because some other
headers are including qemu-common.h, but those headers should eventually
stop including qemu-common.h.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Header file dependency is a frickin' nightmare right now.  cpu.h tends
to get included in our 'include everything' header files but qdev also
needs to include those headers mainly for qdev-properties since it knows
about CharDriverState and friends.

We can solve this for now by splitting out qdev.h along the same lines
that we previously split the C file.  Then cpu.h just needs to include
qdev-core.h.

hw/qdev.h is split into following new headers:
    hw/qdev-core.h
    hw/qdev-properties.h
    hw/qdev-monitor.h
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

[ehabkost: re-add DEFINE_PROP_PCI_HOST_DEVADDR, that was removed on the
 original patch (by mistake, I guess)]
[ehabkost: kill qdev_prop_set_vlan() declaration]
[ehabkost: moved get_fw_dev_path() comment to the original location
 (I don't know why it was moved)]
[ehabkost: removed qdev_exists() declaration]
[ehabkost: keep using 'QemuOpts' instead of 'struct QemuOpts', as
 qdev-core.h includes qemu-option.h]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It's necessary for making CPU child of DEVICE without
causing circular header deps.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
[ehabkost: re-added the typedef to hw/irq.h after rebasing]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Every time we make a tiny change on a header file, we often find
circular header dependency problems. To avoid this nightmare, we need to
stop including qemu-common.h from other headers, and we should gradually
move the declarations from the catch-all qemu-common.h header to their
specific headers.

This simply adds a comment documenting the rules about qemu-common.h,
hoping that people will see it before including qemu-common.h from other
header files, and before adding more declarations to qemu-common.h.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

vfio-pci: KVM INTx accel & common msi_get_message

* awilliam/tags/vfio-pci-for-qemu-1.3.0-rc0:
  vfio-pci: Use common msi_get_message
  vfio-pci: Add KVM INTx acceleration
  linux-headers: Update to 3.7-rc5
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kraxel/pixman.v5:
  pixman: cleanup properly on make distclean
  pixman: add licensing info
  pixman: build internal version early
  pixman: pass cflags, add -fPIC
  pixman: disable gtk
  pixman: set --host for cross builds
  pixman: add output dir to include path
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* bonzini/nbd-next:
  nbd: fixes to read-only handling
  hmp: add NBD server commands
  nbd: disallow nbd-server-add before nbd-server-start
  nbd: force read-only export for read-only devices
  nbd: fix nbd_server_stop crash when no server was running
  nbd: accept URIs
  nbd: accept relative path to Unix socket
  qemu-nbd: initialize main loop before block layer
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* bonzini/scsi-next:
  virtio-scsi: use dma_context_memory
  dma: Define dma_context_memory and use in sysbus-ohci
  megasas: Correct target/lun mapping
  scsi-disk: flush cache after disabling it
  megasas: do not include block_int.h
  scsi: remove superfluous call to scsi_device_set_ua
  virtio-scsi: factor checks for VIRTIO_SCSI_S_DRIVER_OK when reporting events
  scsi: do not return short responses for emulated commands
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kraxel/usb.70:
  ehci: fix migration
  xhci: Fix some DMA host endian bugs
  usb/combined-packet: Move freeing of combined to usb_combined_packet_remove()
  xhci: Add support for packets with both data and an error status
  ehci: Add support for packets with both data and an error status
  ehci: Get rid of the magical PROC_ERR status
  usb-redir: Allow packets to have both data and an error-status
  usb: split packet result into actual_length + status
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* spice/spice.v63:
  spice: fix initialization order
  pflib: unused, remove it.
  spice: switch to pixman
  qxl: call dpy_gfx_resize when entering vga mode
  qxl: fix cursor reset
  hw/qxl: qxl_send_events: nop if stopped
  hw/qxl: guest bug on primary create with stride %4 != 0
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NEric Johnson <ericj@mips.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Pass on CFLAGS to the pixman configure script.
Add -fPIC to the cflags, needed to make the final link succeed.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

gtk is only needed to build test cases.
Disable it to simplify the build.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Set --host when calling pixman configure while doing cross builds so
pixman's autoconf picks up the cross build tools correctly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Needed to make sure the (generated) pixman-version.h file is found.
Based on a patch from Blue Swirl.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

We can get rid of our local version now that a helper exists.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This makes use of the new level irqfd support enabling bypass of qemu
userspace both on INTx injection and unmask.  This significantly
boosts the performance of devices making use of legacy interrupts (ex.
~60% better netperf TCP_RR scores for an e1000e assigned to a Linux
guest and booted with pci=nomsi).  This also avoids flipping mmaps on
and off to simulate EOIs, so greatly improves performance of device
access in addition to interrupt latency.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

update-linux-headers.sh script run against Linux tag v3.7-rc5
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

We do not need BLKROSET if the kernel supports setting flags.
Also, always do BLKROSET even for a read-write export, otherwise
the read-only state remains "sticky" after the invocation of
"qemu-nbd -r".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit ed2aec4867f0d5f5de496bb765347b5d0cfe113d changed the return
value of aio_ctx_prepare from false to true when only idle bottom
halves are available.  This broke PC old-style DMA, which uses them.
Fix this by making aio_ctx_prepare return true only when non-idle
bottom halves are scheduled to run.
Reported-by: Nmalc <av1474@comtv.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

Until address_space_rw was introduced, NULL was accepted as a
placeholder for DMA with no IOMMU (to address_space_memory).

This does not work anymore, and dma_context_memory needs to
be specified explicitly.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Define a new global dma_context_memory which is a DMAContext corresponding
to the global address_space_memory AddressSpace. This can be used by
sysbus peripherals like sysbus-ohci which need to do DMA.

In particular, use it in the sysbus-ohci device, which fixes a
segfault when attempting to use that device.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The structure to reference a logical drive has an unused field,
which can be used to carry the lun ID. This enabled seabios to
establish the proper target/LUN mapping.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SBC says that "if an application client changes the WCE bit from one to
zero via a MODE SELECT command, then the device server shall write
any data in volatile cache to non-volatile medium before completing
the command".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Suggested by Laszlo Ersek.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Suggested by Laszlo Ersek.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The inquiry command, for the case of VPD=1, was returning short
responses; the number of returned bytes was just the number of bytes
in the request, without padding to the specified allocation length
with zero bytes.  This is usually harmless, but it is a violation
of the SCSI specification.

To fix this, always pad with zero bytes to r->cmd.xfer in
scsi_disk_emulate_command, and return at most r->buflen bytes
(the size of the buffer for command data) rather than at most
buflen bytes (the number of bytes that was filled in).

Before this patch, "strace sg_inq -p0x83 /dev/sda" would report a
non-zero resid value.  After this patch, it reports resid=0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It works nicely with the QMP commands, but it adds useless complication
with HMP.  In particular, see the following:

    (qemu) nbd_server_add -w scsi0-hd0
    (qemu) nbd_server_start -a localhost:10809
    NBD server already exporting device scsi0-hd0
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is the desired behavior for HMP, but it is a better choice for QMP as well.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>