Now that we have the SoC init function in the same file, let's integrate
it with the board initialization.

While at it, also make use of the newly qdev'ified PCI host controller.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The separation of ppc440 and ppc440_bamboo makes some sense, since ppc440
is the SoC while ppc440_bamboo is the actual board. But the separation
makes things harder for us for no good reason, so let's just fold them
in together with each other.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Due to popular demand, this qdevifies the PCI host controller of 4xx SoCs
the same way as e500.

We have to introduce a small stub function for pci init that will be
removed in a later patch, once we qdev'ified the board, to keep the build
working.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Tabs followed by spaces are a no-go. My editor shows it red, distracting
me from actual work! :)
Signed-off-by: NAlexander Graf <agraf@suse.de>

Nobody needs to run bamboo in 0.12 compat mode. Remove the machine.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Now that we have 440 TLB emulation, we can also support running the 440EP
CPU target in system emulation mode.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Today we're exposing a Virtex 440 CPU to the guest despite the fact
that we're telling the guest that we're running on a 440EP one in the
device tree.

So let's better default to a real 440EP to make things synced again.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Recent dtc doesn't compile our dts anymore. Change all hex numbers to have
0x prefixes, indicate the old version and recompile using recent dtc.

This doesn't change any semantics in the device tree.
Signed-off-by: NAlexander Graf <agraf@suse.de>

When running a 440 target, we currently get invalid irq_num values (-1)
which completely confuse the IRQ setting code.

This is most likely due to the missing qdev conversion.

While this shouldn't happen in the first place and should really rather
be fixed by converting the target, I dislike segfaults. So for now, let's
just print a warning and ignore invalid irq_num values.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Back in the day when the bamboo target got introduced, the initial TLB was
dictated by KVM. TCG has been missing initial TLB values ever since, rendering
the target unusable for TCG usage.

This patch adds linear TLB maps the way Linux expects them, making the target
work.
Signed-off-by: NAlexander Graf <agraf@suse.de>

To be able to support CPU reset, we need to put all register initialization
and initial state into a CPU reset hook instead of a function that is only
called once on bootup.

This is a preparation step for the initial TLB setting code and brings bamboo
more in line with what e500 and virtex already do.
Signed-off-by: NAlexander Graf <agraf@suse.de>

When using TCG with a BookE PowerPC core, we need to explicitly initialize
the BookE timers with the correct frequencies.

This was missing for 440EP, since that code came from KVM and was never used
with TCG.
Signed-off-by: NAlexander Graf <agraf@suse.de>

* spice/spice.v47:
  qxl: Slot sanity check in qxl_phys2virt() is off by one, fix

* stefanha/trivial-patches:
  Makefile: Remove generated headers on clean
  Makefile: Exclude tests/Makefile in unconfigured tree
  lm32: Fix mixup of uint32 and uint32_t
  tests: Silence gtester in Makefile
  qemu-tool: Fix mixup of int64 and int64_t

* qmp/queue/qmp:
  block: use proper qerrors in qmp_block_resize
  qerror: restore alphabetical order over qerrors
  qerror: add check-qerror.sh to verify alphabetical order
  qmp: Add missing gcc format attribute and fix format string
  qapi: Convert block_set_io_throttle
  qapi: Convert change
  qerror: Extend QERR_DEVICE_ENCRYPTED
  qapi: Introduce change-vnc-password
  monitor: expose readline state
  qapi: Convert eject
  block: eject_device(): Use error_set()
  qapi: Convert expire_password
  qapi: Convert set_password
  vnc: Simplify vnc_display_password()

* pmaydell/arm-devs.for-upstream:
  arm: make the number of GIC interrupts configurable
  hw/lan9118: Add save/load support
  arm: Remove incorrect comment in arm_timer
  vexpress, realview: Add (dummy) L2 cache controller

* kraxel/usb.37:
  usb-redir: Improve some debugging messages
  usb-redir: Try to keep our buffer size near the target size
  usb-redir: Pre-fill our isoc input buffer before sending pkts to the host
  usb-redir: Dynamically adjust iso buffering size based on ep interval
  usb-redir: Clear iso / irq error when stopping the stream
  usb: link packets to endpoints not devices
  usb: add max_packet_size to USBEndpoint
  usb/debug: add usb_ep_dump
  usb-desc: USBEndpoint support
  usb: add ifnum to USBEndpoint
  usb: add USBEndpoint
  xhci: Initial xHCI implementation
  usb: add audio device model
  usb-desc: audio endpoint support
  usb: track altsetting in USBDevice
  usb: track configuration and interface count in USBDevice.
  usb-host: rip out legacy procfs support

Running `make distclean' followed by a new out-of-tree build would fail
due to stale generated QMP headers in the tree.

Commit 611b7273 (Makefile: remove more
generated files on clean) made sure generated sources are removed.

Also remove generated headers introduced in commit
e3193601 (qapi: use middle mode in QMP
server).
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Since commit dbfe06c6 (build:
split unit test builds to a separate makefile fragment),
in absence of config-host.mak an undefined $(SRC_PATH) breaks
`make distclean' due to /tests/Makefile not being include'able.

Fix by only including when config-host.mak is present.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Commit d23948b1 (lm32: add Milkymist
VGAFB support) introduced a stray usage of the softfloat uint32 type.

Use uint32_t instead.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NMichael Walle <michael@walle.cc>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This prettifies make output a little by avoiding a very long line.
As gtester prints the checks when they are run, no information is lost.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Commit cbcfa041 (link the main loop and
its dependencies into the tools) introduced stray usages of int64.

Use int64_t instead.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Let's report specific errors so that management tools and users can
identify the problem.

Two new qerrors are needed:
 * QERR_DEVICE_HAS_NO_MEDIUM for ENOMEDIUM
 * QERR_DEVICE_IS_READ_ONLY for EACCES
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Over time these must have gotten out of order.  Put everything back in
alphabetical order.

This is purely a clean up.  In practice nothing depends on the order.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We're supposed to keep qerror definitions and table entries in
alphabetical order.  In practice this is not checked.

I haven't found a nice way to integrate this into the makefile yet but
we can at least have this script which verifies that qerrors are in
alphabetical order.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Include the name of the encrypted file.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

New QMP command to change the VNC password.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

HMP is now implemented in terms of QMP.  The monitor has a bunch of logic to
deal with HMP right now like readline support.  Export it from the monitor so
we can consume it in hmp.c.

In short time, hmp.c will take over all of the readline bits.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Also drops the leftover 'mon' argument.

This is a preparation for the next commits which will port the
eject and change commands to the QAPI.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Drop the qerror_report() call from it and let its callers set the error
themselves. This also allows for dropping the 'ret' variable.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Increase the maximum number of GIC interrupts for a9mp and a11mp to 1020,
and create a configurable property for each defaulting to 96 and 64
(respectively) so that device modelers can set the value appropriately
for their SoC. Other ARM processors also set their maximum number of
used IRQs appropriately.

Set the maximum theoretical number of GIC interrupts to 1020 and
update the save/restore code to only use the appropriate number for
each SoC.
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
[Peter Maydell: fixed minor whitespace snafu]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement save/load for the LAN9118.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

The current comment says that the arm_timers are restricted to between
32 KHz and 1 MHz, but sp804 TRM does not specify those limits.
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>