- 05 6月, 2012 1 次提交
-
-
由 Luiz Capitulino 提交于
This is like qemu_find_opts(), except that it takes an Error argument. This new function allows for a incremental conversion of code using qemu_find_opts(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-By: NLaszlo Ersek <lersek@redhat.com>
-
- 11 5月, 2012 2 次提交
-
-
由 Eduardo Habkost 提交于
Changes v2 -> v3: - Rebase against latest qemu.git Changes v1 -> v2: - Change 'userconfig' field/variables to bool instead of int - Coding style change Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Eduardo Habkost 提交于
Function added to arch_init.c because it depends on arch-specific settings. Changes v1 -> v2: - Move qemu_read_default_config_file() prototype to qemu-config.h Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 9月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
Add -spice command line switch. Has support setting passwd and port for now. With this patch applied the spice client can successfully connect to qemu. You can't do anything useful yet though.
-
- 23 8月, 2010 2 次提交
-
-
由 Gerd Hoffmann 提交于
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 5月, 2010 2 次提交
-
-
由 Gautham R Shenoy 提交于
Currently the commandline to create a virtual-filesystem pass-through between the guest and the host is as follows: #qemu -fsdev fstype,id=ID,path=path/to/share \ -device virtio-9p-pci,fsdev=ID,mount_tag=tag \ This patch provides a syntactic short-cut to achieve the same as follows: #qemu -virtfs fstype,path=path/to/share,mount_tag=tag This will be internally expanded as: #qemu -fsdev fstype,id=tag,path=path/to/share, \ -device virtio-9p-pci,fsdev=tag,mount_tag=tag \ Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gautham R Shenoy 提交于
This patch creates a new command line option named -fsdev to hold any file system specific information. The option will currently hold the following attributes: -fsdev fstype id=id,path=path_to_share where fstype: Type of the file system. id: Identifier used to refer to this fsdev path: The path on the host that is identified by this fsdev. [aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext] Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 4月, 2010 2 次提交
-
-
由 Kevin Wolf 提交于
qemu_config_parse gets the option groups as a parameter now instead of hardcoding the VM configuration groups. This way it can be used for other configurations, too. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Introduce a new function qemu_read_config_file which reads the VM configuration from a config file. Unlike qemu_config_parse it doesn't take a open file but a filename and reduces code duplication as a side effect. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 17 3月, 2010 1 次提交
-
-
由 Markus Armbruster 提交于
Next commit wants to use it.
-
- 16 3月, 2010 1 次提交
-
-
由 Markus Armbruster 提交于
New LOC_FILE. Use it for tracking file name and line number in qemu_config_parse(). We now report errors like qemu:foo.conf:42: Did not find I2C bus for smbus-eeprom In particular, gems like this message: -device: no driver specified become almost nice now: qemu:foo.conf:44: -device: no driver specified (A later commit will get rid of the bogus -device:)
-
- 23 2月, 2010 1 次提交
-
-
由 john cooper 提交于
This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: Njohn cooper <john.cooper@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 19 12月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Add isa-fdc (disables default_floppy). Add ide-drive (disables default_cdrom). Also walk the -global QemuOpts, so we'll catch -global isa-fdc.drive{A,B}=<name> too. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 12 12月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
This patch reworks the -monitor handling: - It adds a new "mon" QemuOpts list for the monitor(s). - It adds a monitor_parse() function to parse the -monitor switch. - It adds a mon_init function to initialize the monitor(s) from the "mon" QemuOpts list. - It winds up everything and removes the old bits. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch adds infrastructure and command line option for setting global defaults for device properties, i.e. you can for example use -global virtio-blk-pci.vectors=0 to turn off msi by default for all virtio block devices. The config file syntax is: [global] driver = "virtio-blk-pci" property = "vectors" value = "0" This can also be used to set properties for devices which are not created via -device but implicitly via machine init, i.e. -global isa-fdc,driveA=<name> This patch uses the mechanism which configures properties for the compatibility machine types (pc-0.10 & friends). The command line takes precedence over the machine type values. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 11月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
Add functions to parse QemuOpts from a git-style config file. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add a function to write the QemuOpts configuration to a git-style config file. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 15 10月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
Patchworks-ID: 35506 Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 10月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
The first step in porting -net to QemuOpts. We do not include parameter descriptions in the QemuOptsList because we use the first parameter to choose which descriptions validate against. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 10月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
Deprecate -localtime, -setdate and -rtc-td-hack in favor of a new unified command line switch: -rtc [base=utc|localtime|date][,driftfix=none|slew] Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 9月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
start switching chardevs to QemuOpts. This patch adds the infrastructure and converts the null device. The patch brings two new functions: qemu_chr_open_opts() same as qemu_chr_open(), but uses QemuOpts instead of a option char string. qemu_chr_parse_compat() accepts a traditional chardev option string, returns the corresponding QemuOpts instance, to handle backward compatibility. The patch also adds a new -chardev switch which can be used to create named+unconnected chardevs, like this: -chardev null,id=test This uses the new qemu_chr_open_opts. Thus with this patch alone only the null device works. The other devices will follow ... Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
qemu-option.h has no protection against including it twice. This patch adds the usual "#ifndef header" bits. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 8月, 2009 3 次提交
-
-
由 Gerd Hoffmann 提交于
Make -device switch use the QemuOpts framework. Everything should continue to work like it did before. New: "-set device.$id.$property=$value" works. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
由 Gerd Hoffmann 提交于
One use case will be file for drives (no filename quoting issues), i.e. -drive id=test,if=virtio -set drive.test.file=/vmdisk/test-virtio.img It will work for any other option (assuming handled by QemuOpts) though. Except for id= for obvious reasons ;). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
由 Gerd Hoffmann 提交于
Move drive option description there. Rename it, give it a qemu_ prefix. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-